Ecuaciones para predecir el diámetro normal en función del diámetro del tocón para Abies religiosa (Kunth) Schltdl. et Cham.
DOI:
https://doi.org/10.29298/rmcf.v7i37.54Keywords:
Abies religiosa (Kunth) Schltdl. et Cham., alometría, manejo, predicción, volumenAbstract
En las auditorías forestales en zonas aprovechadas, se requiere del diámetro normal (dn) para estimar los volúmenes removidos. El dn se estima en función del diámetro del tocón (dt) mediante regresión. Con apoyo de una ecuación que dependa del dn o del dt se estima el volumen (v). El objetivo fue, desarrollar ecuaciones predictivas del diámetro normal en función del diámetro del tocón para Abies religiosa Kunth Schltdl. et Cham., en Tancítaro, Michoacán. Se tomaron 1,083 pares de datos de dn-dt de diferentes categorías diamétricas. Para el ajuste se usó PROC MODEL y la selección de ecuaciones se hizo con base al Cuadrado Medio del Error (CME), la Raíz del Cuadrado Medio del Error (RCME), nivel de significancia de los estimadores (Pr>|t|) y el Coeficiente de determinación ajustado (R²adj) y se analizó la distribución de residuales. Para verificar el cumplimiento de los supuestos de la regresión, se usó la prueba de Shapiro Wilk y para la precisión de las predicciones se estimó el sesgo (). Las ecuaciones obtenidas son:, y . Con base en los estadísticos CME=2.216, 2.093 y 2.216, la R2adj=0.9938, 0.9942 y 0.9938, la significancia de los parámetros Pr > |t|=<0.0001, la prueba de normalidad de Shapiro Wilk W=0.97335, 0.97335 y 0.97335 con Pr<W=<0.0001, así como su capacidad predictiva =1.089, 1.168 y 1.089, se infiere que las ecuaciones son válidas para predecir el dn en función del dt. Las ecuaciones que se ajustaron indican una tendencia lineal entre las variables dn y dt.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in Revista Mexicana de Ciencias Forestales accept the following conditions:
In accordance with copyright laws, Revista Mexicana de Ciencias Forestales recognizes and respects the authors’ moral right and ownership of property rights which will be transferred to the journal for dissemination in open access.
All the texts published by Revista Mexicana de Ciencias Forestales –with no exception– are distributed under a Creative Commons License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0), which allows third parties to use the publication as long as the work’s authorship and its first publication in this journal are mentioned
The author(s) can enter into independent and additional contractual agreements for the nonexclusive distribution of the version of the article published in Revista Mexicana de Ciencias Forestales (for example, include it into an institutional repository or publish it in a book) as long as it is clearly and explicitly indicated that the work was published for the first time in Revista Mexicana de Ciencias Forestales.
For all the above, the authors shall send the form of Letter-transfer of Property Rights for the first publication duly filled in and signed by the author(s). This form must be sent as a PDF file to: ciencia.forestal2@inifap.gob.mx
This work is licensed under a Creative Commons Attribution-Noncommercial 4.0 International license.