EVALUACIÓN FISICOMECÁNICA DE LA PULPA KRAFT BLANQUEADA DE LA MADERA DE Pinus douglasiana Martínez
Keywords:
Pinus douglasiana, Kraft pulping, pulp bleaching, Kraft pulp physlcal and mechanical propertiesAbstract
La madera de Pinus doug/asiana Martínez se pulpeó mediante el proceso Kraft, usando 20% de reactivos sobre madera base seca y un licor con 20 % de sulfidez. El tiempo de cocción fue de 120 minutos a una temperatura de 168 •c.
Después de caracterizar la pulpa Kraft café, en cuanto a clasíficación de fibras, Número de Kappa, viscosidad, bl,mcura y opacidad, ésta fue blanqueada mediante la secuencia OD,D2. Para la etapa con oxigeno, la consistencia fue del 10 %, la temperatura de 100 •c. el tiempo 90 minutos y la presión de 4.0 Kg/m2 Para las etapas con dióxido de cloro, la consistencia fue del 10 %, la temperatura de 70 •e y el tiempo de 180 minutos.
La pulpa Kraft blanqueada se refinó en un molino Jokro, haciendo cuatro puntos: 20, 40, 60 y 90 minutos y el grado de refinación fue medido en ºSchopper-Riegler. De estos cuatro puntos, y uno más sin refinar. se formaron hojas estándar de 60 g/m2, de acuerdo con el método relativo a ISO 5269/1 y T 205 om-88 en un eqLJípo convencional TAPPI semiautomático.
Finalmente la evaluación fisicomecánica de las hojas estándar de pulpa Kraft blanqueada comprendió las siguientes propiedades: largo de ruptura, indice de rasgado, porosidad, drenabilidad, blancura y opacidad.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in Revista Mexicana de Ciencias Forestales accept the following conditions:
In accordance with copyright laws, Revista Mexicana de Ciencias Forestales recognizes and respects the authors’ moral right and ownership of property rights which will be transferred to the journal for dissemination in open access.
All the texts published by Revista Mexicana de Ciencias Forestales –with no exception– are distributed under a Creative Commons License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0), which allows third parties to use the publication as long as the work’s authorship and its first publication in this journal are mentioned
The author(s) can enter into independent and additional contractual agreements for the nonexclusive distribution of the version of the article published in Revista Mexicana de Ciencias Forestales (for example, include it into an institutional repository or publish it in a book) as long as it is clearly and explicitly indicated that the work was published for the first time in Revista Mexicana de Ciencias Forestales.
For all the above, the authors shall send the form of Letter-transfer of Property Rights for the first publication duly filled in and signed by the author(s). This form must be sent as a PDF file to: ciencia.forestal2@inifap.gob.mx
This work is licensed under a Creative Commons Attribution-Noncommercial 4.0 International license.