CARACTERÍSTICAS DE LOS ANILLOS Y DENSIDAD DE LA MADERA A DIFERENTES AL TURAS DEL FUSTE EN RODALES ACLAREADOS DE Pinus patula Schl. et Cham.
Keywords:
Pínus patula, thinning, growth ring, wood density, wood, formation, growthAbstract
To evaluate the effect of different thinning levels on wood quality at severa! stem heights in two Pinus patula stands, wood samples were taken at three stem heights six years after thinnings were applied. On each sample, ring width, earlywood/latewood ratio and wood density were detennined separately for the growth rings formed before and after the thinning.
At both stands thinning significantly affected earlywood, latewood and total ring widths, as well as the earlywood/latewood ratio. Effects on growth ring traits were first noticed two years after thinning, mainly counteracting age effects on growth ring characteristics. Thinning effects were similar along all the sampling heights on the stem. Due to the reduction in latewood ratio, wood density was also slightly reduced (2-5 %) by thinning. Although there were no statistical differences, relative reduction in wood density was larger at breast height than at the other sampling points on the stem.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in Revista Mexicana de Ciencias Forestales accept the following conditions:
In accordance with copyright laws, Revista Mexicana de Ciencias Forestales recognizes and respects the authors’ moral right and ownership of property rights which will be transferred to the journal for dissemination in open access.
All the texts published by Revista Mexicana de Ciencias Forestales –with no exception– are distributed under a Creative Commons License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0), which allows third parties to use the publication as long as the work’s authorship and its first publication in this journal are mentioned
The author(s) can enter into independent and additional contractual agreements for the nonexclusive distribution of the version of the article published in Revista Mexicana de Ciencias Forestales (for example, include it into an institutional repository or publish it in a book) as long as it is clearly and explicitly indicated that the work was published for the first time in Revista Mexicana de Ciencias Forestales.
For all the above, the authors shall send the form of Letter-transfer of Property Rights for the first publication duly filled in and signed by the author(s). This form must be sent as a PDF file to: ciencia.forestal2@inifap.gob.mx
This work is licensed under a Creative Commons Attribution-Noncommercial 4.0 International license.