<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE article
  PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.1 20151215//EN" "https://jats.nlm.nih.gov/publishing/1.1/JATS-journalpublishing1.dtd">
<article article-type="review-article" dtd-version="1.1" specific-use="sps-1.9" xml:lang="es" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">
	<front>
		<journal-meta>
			<journal-id journal-id-type="publisher-id">remcf</journal-id>
			<journal-title-group>
				<journal-title>Revista mexicana de ciencias forestales</journal-title>
				<abbrev-journal-title abbrev-type="publisher">Rev. mex. de cienc. forestales</abbrev-journal-title>
			</journal-title-group>
			<issn pub-type="ppub">2007-1132</issn>
			<publisher>
				<publisher-name>Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias</publisher-name>
			</publisher>
		</journal-meta>
		<article-meta>
			<article-id pub-id-type="publisher-id">00008</article-id>
			<article-id pub-id-type="doi">10.29298/rmcf.v12iEspecial-1.1086</article-id>
			
			<article-categories>
				<subj-group subj-group-type="heading">
					<subject>Artículo de revisión</subject>
				</subj-group>
			</article-categories>
			<title-group>
				<article-title>Aportes de investigación del INIFAP en tecnología de la madera y sus procesos de industrialización</article-title>
			</title-group>
			<contrib-group>
				<contrib contrib-type="author">
					<name>
						<surname>Tamarit-Urias</surname>
						<given-names>Juan Carlos</given-names>
					</name>
					<xref ref-type="aff" rid="aff1"><sup>1</sup></xref>
				</contrib>
				<contrib contrib-type="author">
					<name>
						<surname>Aguilar-Sánchez</surname>
						<given-names>Patricia</given-names>
					</name>
					<xref ref-type="aff" rid="aff1"><sup>1</sup></xref>
				</contrib>
				<contrib contrib-type="author">
					<name>
						<surname>Flores-Velázquez</surname>
						<given-names>Rogelio</given-names>
					</name>
					<xref ref-type="aff" rid="aff2"><sup>2</sup></xref>
				</contrib>
				<contrib contrib-type="author">
					<name>
						<surname>Fuentes-López</surname>
						<given-names>Martha Elena</given-names>
					</name>
					<xref ref-type="aff" rid="aff1"><sup>1</sup></xref>
					<xref ref-type="corresp" rid="c1"><sup>*</sup></xref>
				</contrib>
			</contrib-group>
			<aff id="aff1">
				<label>1</label>
				<institution content-type="original">Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias. Campo Experimental San Martinito. México.</institution>
				<institution content-type="normalized">Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias</institution>
				<institution content-type="orgname">Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias</institution>
				<institution content-type="orgdiv1">Campo Experimental San Martinito</institution>
				<country country="MX">Mexico</country>
			</aff>
			<aff id="aff2">
				<label>2</label>
				<institution content-type="original">Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias. Centro Nacional de Investigación Disciplinaria en Conservación y Mejoramiento de Ecosistemas Forestales. México.</institution>
				<institution content-type="normalized">Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias</institution>
				<institution content-type="orgname">Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias</institution>
				<institution content-type="orgdiv1">Centro Nacional de Investigación Disciplinaria en Conservación y Mejoramiento de Ecosistemas Forestales</institution>
				<country country="MX">Mexico</country>
			</aff>
			<author-notes>
				<corresp id="c1">
					<label>*</label>Autor para correspondencia; correo-e: <email>fuentes.martha@inifap.gob.mx</email>
				</corresp>
				<fn fn-type="conflict" id="fn1">
					<label>Conflicto de intereses</label>
					<p> Lo autores declaran que no existe conflicto de interés.</p>
				</fn>
				<fn fn-type="con" id="fn2">
					<label>Contribución por autor</label>
					<p> Juan Carlos Tamarit-Urias, Martha Elena Fuentes-López: conceptualización y organización de la investigación, recopilación y síntesis de información documental; Patricia Aguilar-Sánchez y Rogelio Flores-Velázquez: aporte de material bibliográfico y revisión del documento. Todos los autores participaron en el análisis de información, así como en la elaboración y corrección del documento.</p>
				</fn>
			</author-notes>
			<pub-date date-type="pub" publication-format="electronic">
				<day>09</day>
				<month>11</month>
				<year>2021</year>
			</pub-date>
			<pub-date date-type="collection" publication-format="electronic">
				<month>11</month>
				<year>2021</year>
			</pub-date>
			<volume>12</volume>
			<issue>spe1</issue>
			<fpage>177</fpage>
			<lpage>214</lpage>
			<history>
				<date date-type="received">
					<day>26</day>
					<month>02</month>
					<year>2021</year>
				</date>
				<date date-type="accepted">
					<day>10</day>
					<month>08</month>
					<year>2021</year>
				</date>
			</history>
			<permissions>
				<license license-type="open-access" xlink:href="https://creativecommons.org/licenses/by-nc/4.0/" xml:lang="es">
					<license-p>Este es un artículo publicado en acceso abierto bajo una licencia Creative Commons</license-p>
				</license>
			</permissions>
			<abstract>
				<title>Resumen</title>
				<p>La caracterización tecnológica de la madera de especies forestales de México es fundamental para determinar su uso potencial óptimo; y con ello lograr procesos de transformación e industrialización exitosos. En este contexto, el Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP) mediante líneas estratégicas de investigación en ciencia y tecnología de la madera, e industrias y productos forestales ha generado conocimiento científico que contribuye a mejorar los sistemas y procesos de producción en la industria, en el marco del desarrollo sustentable. Se presenta una compilación y síntesis de los resultados obtenidos a partir de trabajos relevantes en investigación básica y aplicada que se han realizado en el INIFAP durante los años 1986 a 2020. En el presente documento se abordan temas en tecnología de la madera referentes a la física, mecánica y química de la madera; en tanto que, en materia de procesos de industrialización se desarrollan aspectos de aserrío, secado y maquinado de la madera. Por la abundancia de taxones cuya madera, comúnmente, se cataloga como difícil de utilizar tales como el grupo de encinos y de otras denominadas comunes tropicales, se ha puesto énfasis en la caracterización y aprovechamiento en ese tipo de especies para las regiones templadas y tropicales de México. Además, se incluyen las perspectivas y retos de investigación en tecnología de la madera, industrias y productos forestales.</p>
			</abstract>
			<kwd-group xml:lang="es">
				<title>Palabras clave:</title>
				<kwd>Calidad de la madera</kwd>
				<kwd>caracterización tecnológica</kwd>
				<kwd>industria y productos forestales</kwd>
				<kwd>procesos de transformación primaria</kwd>
				<kwd>usos de la madera</kwd>
				<kwd>xilotecnología</kwd>
			</kwd-group>
			<counts>
				<fig-count count="6"/>
				<table-count count="6"/>
				<equation-count count="0"/>
				<ref-count count="65"/>
				<page-count count="38"/>
			</counts>
		</article-meta>
	</front>
	<body>
		<sec sec-type="intro">
			<title>Introducción</title>
			<p>México cuenta con 64.9 millones de hectáreas de bosques y selvas, ecosistemas en los que cohabitan 46 especies del género <italic>Pinus</italic> (pino), alrededor de 150 de <italic>Quercus</italic> (encino) y más de 62 taxones maderables tropicales de diversos géneros; en conjunto, sus taxa cubren 47.7 % de la superficie forestal nacional. La producción maderable en el año 2017 fue de 8.5 millones de m<sup>3</sup> rollo; el pino contribuyó con 70.87 %; las especies comunes tropicales con 13.39 % y los encinos con 9.84 % (<xref ref-type="bibr" rid="B11">Conafor, 2019</xref>).</p>
			<p>El potencial económico, social y ambiental que representan las especies maderables induce a generar conocimiento tecnológico para la industria forestal, que coadyuve a su mejor utilización, así como a lograr procesos de transformación e industrialización exitosos. El uso correcto de la madera demanda un conocimiento normalizado con estándares internacionales sobre sus atributos, que permitan inferir su comportamiento en los procesos de transformación y en los diversos tratamientos que se requieren para las condiciones de uso a que será expuesta.</p>
			<p>En el Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP) se ha realizado investigación en tecnología de la madera, industrias y productos forestales; asimismo, se ha contribuido al conocimiento y uso de la madera mediante la caracterización xilotecnológica, a partir de líneas de investigación como anatomía macro y microscópica, durabilidad natural, preservación de maderas duras y blandas, entre otras. Sin embargo, en el presente documento solo se presentan los principales aportes derivados de la investigación relacionada a los aspectos físicos, mecánicos y químicos de la madera; así como, a los procesos de transformación primaria de aserrío, secado y maquinado, con énfasis en taxones que pertenecen al grupo de las coníferas con importancia comercial como <italic>Pinus,</italic> latifoliadas del género <italic>Quercus</italic> spp. y algunas especies tropicales clasificadas como duras.</p>
			<p>Para integrar los resultados de investigación más relevantes en los temas de tecnología de la madera e industrias forestales antes señalados, se realizó una minuciosa y exhaustiva revisión documental en las publicaciones oficiales disponibles de la Serie INIFAP. También, se consultó literatura científica en forma de artículos publicados por investigadores de esta institución. Para delinear un marco teórico básico y de discusión en cada tema, se revisó bibliografía científica especializada, así como las normas técnicas de caracterizaciones específicas. En menor medida, se incorporaron publicaciones de personal científico ajeno a la Institución, las cuales se utilizaron para efectos de contraste, referencia y complementariedad de la información consignada.</p>
			<p>Con base en la premisa fundamental de que el fin último de la tecnología de la madera siempre será proporcionar elementos científicos-técnicos para que la industria forestal genere productos que satisfagan y solucionen necesidades de la sociedad, es de esperarse que con las aportaciones del INIFAP en esta materia sea posible avizorar perspectivas de investigación con temas y líneas de investigación que conformen una agenda actualizada, prioritaria y estratégica, que además privilegie la innovación, el crecimiento y el desarrollo; lo que contribuirá a que la industria forestal de México sea más eficiente y competitiva en el marco del desarrollo sustentable.</p>
			<sec>
				<title>Física y mecánica de la madera</title>
				<p>Las propiedades físicas y mecánicas de la madera son las más importantes para determinar su uso como madera sólida. Esos atributos sirven como índices de calidad para precisar el uso más conveniente; también, influyen en el comportamiento dimensional de la madera en sus planos transversal, tangencial y radial ante las condiciones climáticas del medio que pueden propiciar efectos no deseables. La resistencia de la madera es fuertemente afectada por la humedad y el sentido de la carga, en relación con el plano longitudinal. En sentido longitudinal, la resistencia a la flexión es directamente proporcional a la densidad de la madera. Las células longitudinales son estructuras que le dan rigidez y resistencia, dado que reciben de forma directa las cargas. Las propiedades físicas más estudiadas son la densidad básica (Db), el contenido de humedad (CH), las contracciones, la relación de anisotropía y el punto de saturación de la fibra (FSP) (Kollman, 1959).</p>
				<p>Las propiedades físicas de la madera de algunos taxones del género <italic>Quercus</italic> se han determinado en los estados de Puebla, Guanajuato y Oaxaca (<xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B30">Honorato y Fuentes 2001</xref>). Los encinos son un grupo taxonómico con distribución y abundancia amplia en México, además tiene un alto potencial productivo; sin embargo, se aprovechan en usos y productos con bajo valor agregado. En su caracterización se emplean los métodos indicados en la Norma Americana ASTM D143 (<xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato y Fuentes, 2001</xref>). Se han estudiado las propiedades físicas de nueve especies de encinos: <italic>Quercus affinis</italic> Scheidw, <italic>Q. glabrescens</italic> Benth., <italic>Q. crassifolia</italic> Bonpl., <italic>Q. mexicana</italic> Bonpl., <italic>Q. laurina</italic> Humb. &amp; Bonpl., <italic>Q. obtusata</italic> Humb. &amp; Bonpl., <italic>Q. rugosa</italic> Née., <italic>Q. durifolia</italic> Seemen ex Loes. y <italic>Q. castanea</italic> Née., cuyas maderas se clasificaron con alta densidad, y sus valores oscilaron de 0.62 a 0.84 g cm<sup>-3</sup> (<xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B30">Honorato y Fuentes 2001</xref>).</p>
				<p>La densidad básica es el indicador más utilizado para determinar e inferir otras propiedades de la madera, su rendimiento y calidad. La variación de la densidad se presenta entre y dentro de las especies, además aumenta de la médula hacia la corteza; es el resultado del espesor de la pared celular, del diámetro de las fibras, de la cantidad y el tamaño de los vasos y de la composición química de la madera. En aquella cuya densidad es alta, aumenta la contracción y expansión provocadas por la humedad. La resistencia de la madera es mayor a medida que se incrementa la densidad, la cual se evalúa a partir del conocimiento del nivel de humedad al que se miden su masa y volumen (<xref ref-type="bibr" rid="B43">Panshin y De Zeeuw, 1980</xref>). </p>
				<p>Las contracciones radiales totales se han determinado en un intervalo de 4.3-5.52 %; la contracción tangencial total entre 12.6-16.6 %; mientras que, la contracción volumétrica total en 16.21 a 19.0 % (<xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B30">Honorato y Fuentes 2001</xref>). Estos valores sugieren cambios dimensionales altos y muy altos, así como una elevada relación de anisotropía; lo que conlleva a una gran propensión a la deformación (rajaduras y agrietamientos) y a una menor estabilidad dimensional. Grandes diferencias en los valores de las contracciones entre los planos radial y tangencial pueden provocar defectos durante el secado, mismos que se acentúan cuando el contenido de humedad es inferior al Punto de Saturación de la Fibra (SFP, por sus siglas en inglés) (<xref ref-type="bibr" rid="B35">Kollmann, 1959</xref>; <xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>).</p>
				<p>El SFP representa el punto de inflexión a partir del cual se presentan cambios importantes en las propiedades físicas y mecánicas. En el INIFAP se han obtenido porcentajes que fluctúan de 25 a 35 % de contenido de humedad. La anisotropía varía entre 2.5 y 3.4, registros que se relacionan con abundantes rayos uniseriados y poliseriados (<xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato y Fuentes, 2001</xref>). Valores que están dentro del intervalo establecido para las especies de angiospermas con duramen definido (<xref ref-type="bibr" rid="B36">Kollmann y Coté, 1968</xref>).</p>
				<p>Las propiedades mecánicas definen el comportamiento, aptitud y capacidad de la madera para resistir fuerzas externas en sus diferentes planos; guardan una dependencia proporcional con la densidad y la humedad. La rigidez y resistencia mecánica son importantes en aplicaciones con fines estructurales, en el dimensionado de diferentes piezas para evaluar su deformación y determinar su resistencia.</p>
				<p>La flexión estática se refiere a la resistencia que ofrece la madera a las cargas; así cuando se utiliza como una viga (cargas transversales a su eje longitudinal) se producen deformaciones y esfuerzos de compresión, cortante y tracción (<xref ref-type="bibr" rid="B17">Honorato y Fuentes, 2001</xref>). La compresión paralela a la fibra corresponde a la resistencia de la madera a las cargas, cuando se utiliza como columna. La madera presenta su menor resistencia a la tracción en el plano perpendicular y la mayor (de 10-20 veces más) en el sentido paralelo a la fibra; en la dirección transversal se produce una separación de las fibras, y en la longitudinal, la rotura de las mismas (<xref ref-type="bibr" rid="B62">Vignote y Martínez, 2006</xref>).</p>
				<p>La resistencia a la tracción también depende de la densidad; al respecto, en la madera de primavera (más ligera) su resistencia es una sexta parte de la que se tiene en la madera de verano. La resistencia al esfuerzo cortante o cizalladura, frecuentemente, disminuye por los nudos o grietas en la madera y es equivalente a entre 10 y 15 % de la resistencia a la tensión paralela (<xref ref-type="bibr" rid="B62">Vignote y Martínez, 2006</xref>).</p>
				<p>Los valores de las propiedades mecánicas de la madera de encino se han estimado en condición verde, a 12 % de contenido de humedad (<xref ref-type="table" rid="t1">Cuadros 1</xref> y <xref ref-type="table" rid="t2">2</xref>) (<xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato y Fuentes, 2001</xref>), se basaron en la Norma Americana ASTM D143 (<xref ref-type="bibr" rid="B2">ASTM, 1992</xref>) y la <xref ref-type="bibr" rid="B4">Norma Francesa AFN NFB51-009 (1985)</xref> para evaluar la resistencia al impacto. Asimismo, se determinaron la flexión estática y compresión paralela a la fibra con los esfuerzos al límite proporcional, módulo de ruptura, módulo de elasticidad, trabajo al límite de proporcionalidad y trabajo a la carga máxima; además de, la compresión perpendicular a la fibra, tensión perpendicular, esfuerzo cortante, rajado, dureza e impacto. Consistentemente, los valores obtenidos a 12 % de humedad fueron superiores a la condición verde (<xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B30">Honorato y Fuentes 2001</xref>).</p>
				<p>
					<table-wrap id="t1">
						<label>Cuadro 1</label>
						<caption>
							<title>Propiedades mecánicas de la madera de especies del género <italic>Quercus</italic>.</title>
						</caption>
						<table style="border-collapse: collapse; width: 100%">
							<colgroup>
								<col/>
								<col/>
								<col span="3"/>
								<col span="3"/>
								<col/>
								<col span="3"/>
							</colgroup>
							<thead>
								<tr>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" rowspan="2">Especie</th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" rowspan="2">CH</th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="3">Flexión estática <break/>(kg cm<sup>-2</sup>) </th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="3">Compresión axial <break/>(kg cm<sup>-2</sup>) </th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center">CP</th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="3">Impacto </th>
								</tr>
								<tr>
									<th  style="border-bottom: solid thin; " align="center">ELP</th>
									<th  style="border-bottom: solid thin; " align="center">MOR</th>
									<th  style="border-bottom: solid thin; " align="center">MOE</th>
									<th  style="border-bottom: solid thin; " align="center">ELP</th>
									<th  style="border-bottom: solid thin; " align="center">MOR</th>
									<th  style="border-bottom: solid thin; " align="center">MOE</th>
									<th  style="border-bottom: solid thin; " align="center">ELP</th>
									<th  style="border-bottom: solid thin; " align="center">W</th>
									<th  style="border-bottom: solid thin; " align="center">K</th>
									<th  style="border-bottom: solid thin; " align="center">R</th>
								</tr>
							</thead>
							<tbody>
								<tr>
									<td align="left" rowspan="2" style="border-bottom: solid thin"><italic>Q</italic>. <italic>affinis</italic> Scheidw</td>
									<td align="center">Verde</td>
									<td align="center">471</td>
									<td align="center">667</td>
									<td align="center">117</td>
									<td align="center">323</td>
									<td align="center">332</td>
									<td align="center">76</td>
									<td align="center">73</td>
									<td align="center">3.2</td>
									<td align="center">0.48</td>
									<td align="center">159</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin" align="center">12%</td>
									<td style="border-bottom: solid thin" align="center">1 110</td>
									<td style="border-bottom: solid thin" align="center">2 133</td>
									<td style="border-bottom: solid thin" align="center">251</td>
									<td style="border-bottom: solid thin" align="center">540</td>
									<td style="border-bottom: solid thin" align="center">621</td>
									<td style="border-bottom: solid thin" align="center">113</td>
									<td style="border-bottom: solid thin" align="center">153</td>
									<td style="border-bottom: solid thin" align="center">6.3</td>
									<td style="border-bottom: solid thin" align="center">0.81</td>
									<td style="border-bottom: solid thin" align="center">279</td>
								</tr>
								<tr>
									<td align="left" rowspan="2" style="border-bottom: solid thin"><italic>Q</italic>. <italic>glabrescens</italic> Benth.</td>
									<td align="center">Verde</td>
									<td align="center">508</td>
									<td align="center">732</td>
									<td align="center">123</td>
									<td align="center">356</td>
									<td align="center">370</td>
									<td align="center">84</td>
									<td align="center">78</td>
									<td align="center">4.4</td>
									<td align="center">0.62</td>
									<td align="center">176</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin" align="center">12%</td>
									<td style="border-bottom: solid thin" align="center">984</td>
									<td style="border-bottom: solid thin" align="center">1 384</td>
									<td style="border-bottom: solid thin" align="center">195</td>
									<td style="border-bottom: solid thin" align="center">568</td>
									<td style="border-bottom: solid thin" align="center">650</td>
									<td style="border-bottom: solid thin" align="center">124</td>
									<td style="border-bottom: solid thin" align="center">132</td>
									<td style="border-bottom: solid thin" align="center">5.3</td>
									<td style="border-bottom: solid thin" align="center">0.69</td>
									<td style="border-bottom: solid thin" align="center">260</td>
								</tr>
								<tr>
									<td align="left" rowspan="2" style="border-bottom: solid thin"><italic>Q</italic>. <italic>crassifolia</italic> Bonpl.</td>
									<td align="center">Verde</td>
									<td align="center">471</td>
									<td align="center">692</td>
									<td align="center">112</td>
									<td align="center">335</td>
									<td align="center">357</td>
									<td align="center">86</td>
									<td align="center">90</td>
									<td align="center">3.2</td>
									<td align="center">0.49</td>
									<td align="center">155</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin" align="center">12%</td>
									<td style="border-bottom: solid thin" align="center">1 006</td>
									<td style="border-bottom: solid thin" align="center">1 410</td>
									<td style="border-bottom: solid thin" align="center">190</td>
									<td style="border-bottom: solid thin" align="center">598</td>
									<td style="border-bottom: solid thin" align="center">678</td>
									<td style="border-bottom: solid thin" align="center">140</td>
									<td style="border-bottom: solid thin" align="center">144</td>
									<td style="border-bottom: solid thin" align="center">4.6</td>
									<td style="border-bottom: solid thin" align="center">0.60</td>
									<td style="border-bottom: solid thin" align="center">243</td>
								</tr>
								<tr>
									<td align="left" rowspan="2" style="border-bottom: solid thin"><italic>Q</italic>. <italic>mexicana</italic> Bonpl.</td>
									<td align="center">Verde</td>
									<td align="center">446</td>
									<td align="center">687</td>
									<td align="center">104</td>
									<td align="center">292</td>
									<td align="center">313</td>
									<td align="center">71</td>
									<td align="center">84</td>
									<td align="center">3.1</td>
									<td align="center">0.45</td>
									<td align="center">146</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin" align="center">12%</td>
									<td style="border-bottom: solid thin" align="center">736</td>
									<td style="border-bottom: solid thin" align="center">1 155</td>
									<td style="border-bottom: solid thin" align="center">163</td>
									<td style="border-bottom: solid thin" align="center">484</td>
									<td style="border-bottom: solid thin" align="center">535</td>
									<td style="border-bottom: solid thin" align="center">91</td>
									<td style="border-bottom: solid thin" align="center">96</td>
									<td style="border-bottom: solid thin" align="center">3.6</td>
									<td style="border-bottom: solid thin" align="center">0.59</td>
									<td style="border-bottom: solid thin" align="center">215</td>
								</tr>
								<tr>
									<td align="left" rowspan="2" style="border-bottom: solid thin"><italic>Q</italic>. <italic>laurina</italic> Humb. &amp; Bonpl.</td>
									<td align="center">Verde</td>
									<td align="center">486</td>
									<td align="center">723</td>
									<td align="center">115</td>
									<td align="center">340</td>
									<td align="center">350</td>
									<td align="center">77</td>
									<td align="center">86</td>
									<td align="center">3.7</td>
									<td align="center">0.45</td>
									<td align="center">159</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin" align="center">12%</td>
									<td style="border-bottom: solid thin" align="center">1 024</td>
									<td style="border-bottom: solid thin" align="center">1 845</td>
									<td style="border-bottom: solid thin" align="center">182</td>
									<td style="border-bottom: solid thin" align="center">435</td>
									<td style="border-bottom: solid thin" align="center">496</td>
									<td style="border-bottom: solid thin" align="center">86</td>
									<td style="border-bottom: solid thin" align="center">153</td>
									<td style="border-bottom: solid thin" align="center">4.0</td>
									<td style="border-bottom: solid thin" align="center">0.51</td>
									<td style="border-bottom: solid thin" align="center">190</td>
								</tr>
								<tr>
									<td align="left" rowspan="2" style="border-bottom: solid thin"><italic>Q</italic>. <italic>obtusata</italic> Humb. &amp; Bonpl.</td>
									<td align="center">Verde</td>
									<td align="center">459</td>
									<td align="center">681</td>
									<td align="center">263</td>
									<td align="center">295</td>
									<td align="center">331</td>
									<td align="center">348</td>
									<td align="center">81</td>
									<td align="center">4.0</td>
									<td align="center">0.28</td>
									<td align="center">209</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin" align="center">12%</td>
									<td style="border-bottom: solid thin" align="center">750</td>
									<td style="border-bottom: solid thin" align="center">1 108</td>
									<td style="border-bottom: solid thin" align="center">434</td>
									<td style="border-bottom: solid thin" align="center">499</td>
									<td style="border-bottom: solid thin" align="center">590</td>
									<td style="border-bottom: solid thin" align="center">328</td>
									<td style="border-bottom: solid thin" align="center">190</td>
									<td style="border-bottom: solid thin" align="center">5.6</td>
									<td style="border-bottom: solid thin " align="center">0.32</td>
									<td style="border-bottom: solid thin" align="center">224</td>
								</tr>
								<tr>
									<td align="left" rowspan="2" style="border-bottom: solid thin"><italic>Q</italic>. <italic>rugosa</italic> Née</td>
									<td align="center">Verde</td>
									<td align="center">376</td>
									<td align="center">625</td>
									<td align="center">210</td>
									<td align="center">239</td>
									<td align="center">289</td>
									<td align="center">213</td>
									<td align="center">67</td>
									<td align="center">4.4</td>
									<td align="center">0.29</td>
									<td align="center">172</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin" align="center">12%</td>
									<td style="border-bottom: solid thin" align="center">711</td>
									<td style="border-bottom: solid thin" align="center">1 194</td>
									<td style="border-bottom: solid thin" align="center">364</td>
									<td style="border-bottom: solid thin" align="center">423</td>
									<td style="border-bottom: solid thin" align="center">558</td>
									<td style="border-bottom: solid thin" align="center">259</td>
									<td style="border-bottom: solid thin" align="center">172</td>
									<td style="border-bottom: solid thin" align="center">5.1</td>
									<td style="border-bottom: solid thin" align="center">0.32</td>
									<td style="border-bottom: solid thin" align="center">210</td>
								</tr>
								<tr>
									<td align="left" rowspan="2" style="border-bottom: solid thin"><italic>Q. durifolia</italic> Seemen ex Loes.</td>
									<td align="center">Verde</td>
									<td align="center">398</td>
									<td align="center">608</td>
									<td align="center">235</td>
									<td align="center">230</td>
									<td align="center">276</td>
									<td align="center">229</td>
									<td align="center">85</td>
									<td align="center">3.5</td>
									<td align="center">0.28</td>
									<td align="center">188</td>
								</tr>
								<tr>
									<td align="center" style="border-bottom: solid thin">12%</td>
									<td style="border-bottom: solid thin" align="center">662</td>
									<td style="border-bottom: solid thin" align="center">1 022</td>
									<td style="border-bottom: solid thin" align="center">298</td>
									<td style="border-bottom: solid thin" align="center">439</td>
									<td style="border-bottom: solid thin" align="center">539</td>
									<td style="border-bottom: solid thin" align="center">331</td>
									<td style="border-bottom: solid thin" align="center">140</td>
									<td style="border-bottom: solid thin" align="center">3.4</td>
									<td style="border-bottom: solid thin" align="center">0.30</td>
									<td style="border-bottom: solid thin" align="center">190</td>
								</tr>
								<tr>
									<td align="left" rowspan="2" style="border-bottom: solid thin"><italic>Q</italic>. <italic>castanea</italic> Née</td>
									<td align="center">Verde</td>
									<td align="center">545</td>
									<td align="center">767</td>
									<td align="center">309</td>
									<td align="center">257</td>
									<td align="center">313</td>
									<td align="center">240</td>
									<td align="center">85</td>
									<td align="center">3.1</td>
									<td align="center">0.31</td>
									<td align="center">187</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin" align="center">12%</td>
									<td style="border-bottom: solid thin" align="center">885</td>
									<td style="border-bottom: solid thin" align="center">1 256</td>
									<td style="border-bottom: solid thin" align="center">377</td>
									<td style="border-bottom: solid thin" align="center">539</td>
									<td style="border-bottom: solid thin" align="center">628</td>
									<td style="border-bottom: solid thin" align="center">425</td>
									<td style="border-bottom: solid thin" align="center">148</td>
									<td style="border-bottom: solid thin" align="center">4.8</td>
									<td style="border-bottom: solid thin" align="center">0.32</td>
									<td style="border-bottom: solid thin" align="center">200</td>
								</tr>
							</tbody>
						</table>
						<table-wrap-foot>
							<fn id="TFN1">
								<p>Fuente: <xref ref-type="bibr" rid="B23">Fuentes y Flores (1995)</xref>; <xref ref-type="bibr" rid="B17">Honorato y Fuentes (2001)</xref>.</p>
							</fn>
							<fn id="TFN2">
								<p>CH = Contenido de humedad; ELP = Esfuerzo al límite de proporcionalidad; MOR = Módulo de ruptura; MOE = Módulo de elasticidad (kg cm<sup>-2</sup> × 1000); CP = Compresión perpendicular; W = Trabajo a la ruptura (KJ m<sup>-2</sup>); K = Coeficiente de resiliencia; R = Reacción instantánea a la ruptura (kg).</p>
							</fn>
						</table-wrap-foot>
					</table-wrap>
				</p>
				<p>
					<table-wrap id="t2">
						<label>Cuadro 2</label>
						<caption>
							<title>Otras propiedades mecánicas de la madera de especies del género <italic>Quercus</italic>.</title>
						</caption>
						<table style="border-collapse: collapse; width: 100%">
							<colgroup>
								<col/>
								<col span="3"/>
								<col span="3"/>
								<col span="2"/>
								<col span="3"/>
								<col/>
							</colgroup>
							<thead>
								<tr>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" rowspan="2">Especie</th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">Dureza <break/>PEF (kg) </th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">Janka <break/>PAF (kg) </th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">Cortante <break/>EM (kg cm<sup>-2</sup>)</th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">Rajado <break/>EM (kg cm<sup>-2</sup>) </th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">TP EM <break/>(kg cm<sup>-2</sup>)</th>
								</tr>
								<tr>
									<th  style="border-bottom: solid thin; " align="center">Verd</th>
									<th  style="border-bottom: solid thin; " align="center">12 %</th>
									<th  style="border-bottom: solid thin; " align="center">Verd</th>
									<th  style="border-bottom: solid thin; " align="center">12 %</th>
									<th  style="border-bottom: solid thin; " align="center">Verd</th>
									<th  style="border-bottom: solid thin; " align="center">12 %</th>
									<th  style="border-bottom: solid thin; " align="center">Verd</th>
									<th  style="border-bottom: solid thin; " align="center">12 %</th>
									<th  style="border-bottom: solid thin; " align="center">Verd</th>
									<th  style="border-bottom: solid thin; " align="center">12 %</th>
								</tr>
							</thead>
							<tbody>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>affinis</italic> Scheidw</td>
									<td align="center">575</td>
									<td align="center">1 011</td>
									<td align="center">583</td>
									<td align="center">1 180</td>
									<td align="center">115</td>
									<td align="center">175</td>
									<td align="center">78</td>
									<td align="center">89</td>
									<td align="center">65</td>
									<td align="center">82</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>glabrescens</italic> Benth.</td>
									<td align="center">730</td>
									<td align="center">908</td>
									<td align="center">696</td>
									<td align="center">1 042</td>
									<td align="center">120</td>
									<td align="center">152</td>
									<td align="center">73</td>
									<td align="center">93</td>
									<td align="center">66</td>
									<td align="center">67</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>crassifolia</italic> Bonpl.</td>
									<td align="center">612</td>
									<td align="center">838</td>
									<td align="center">665</td>
									<td align="center">1 169</td>
									<td align="center">114</td>
									<td align="center">143</td>
									<td align="center">95</td>
									<td align="center">111</td>
									<td align="center">65</td>
									<td align="center">67</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>mexicana</italic> Bonpl.</td>
									<td align="center">510</td>
									<td align="center">594</td>
									<td align="center">523</td>
									<td align="center">1 001</td>
									<td align="center">103</td>
									<td align="center">133</td>
									<td align="center">88</td>
									<td align="center">97</td>
									<td align="center">63</td>
									<td align="center">64</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>laurina</italic> Humb. &amp; Bonpl.</td>
									<td align="center">648</td>
									<td align="center">821</td>
									<td align="center">646</td>
									<td align="center">1 094</td>
									<td align="center">122</td>
									<td align="center">145</td>
									<td align="center">97</td>
									<td align="center">116</td>
									<td align="center">64</td>
									<td align="center">71</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>obtusata</italic> Humb. &amp; Bonpl.</td>
									<td align="center">792</td>
									<td align="center">1 320</td>
									<td align="center">799</td>
									<td align="center">1 443</td>
									<td align="center">109</td>
									<td align="center">208</td>
									<td align="center">93</td>
									<td align="center">99</td>
									<td align="center">66</td>
									<td align="center">66</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>rugosa</italic> Née</td>
									<td align="center">733</td>
									<td align="center">1 234</td>
									<td align="center">752</td>
									<td align="center">1 361</td>
									<td align="center">114</td>
									<td align="center">192</td>
									<td align="center">72</td>
									<td align="center">95</td>
									<td align="center">46</td>
									<td align="center">57</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>durifolia</italic> Seemen ex Loes.</td>
									<td align="center">658</td>
									<td align="center">904</td>
									<td align="center">674</td>
									<td align="center">1 099</td>
									<td align="center">121</td>
									<td align="center">184</td>
									<td align="center">85</td>
									<td align="center">112</td>
									<td align="center">62</td>
									<td align="center">68</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin;" align="left"><italic>Q</italic>. <italic>castanea</italic> Née</td>
									<td style="border-bottom: solid thin;" align="center">632</td>
									<td style="border-bottom: solid thin;" align="center">1 002</td>
									<td style="border-bottom: solid thin;" align="center">692</td>
									<td style="border-bottom: solid thin;" align="center">1 203</td>
									<td style="border-bottom: solid thin;" align="center">117</td>
									<td style="border-bottom: solid thin;" align="center">199</td>
									<td style="border-bottom: solid thin;" align="center">80</td>
									<td style="border-bottom: solid thin;" align="center">131</td>
									<td style="border-bottom: solid thin;" align="center">49</td>
									<td style="border-bottom: solid thin;" align="center">85</td>
								</tr>
							</tbody>
						</table>
						<table-wrap-foot>
							<fn id="TFN3">
								<p>Fuente: <xref ref-type="bibr" rid="B23">Fuentes y Flores (1995)</xref>; <xref ref-type="bibr" rid="B17">Honorato y Fuentes (2001)</xref>.</p>
							</fn>
							<fn id="TFN4">
								<p>PEF = Perpendicular a la fibra; PAF = Paralelo a la fibra; EM = Esfuerzo máximo; TP = Tensión perpendicular; Verd = CH verde.</p>
							</fn>
						</table-wrap-foot>
					</table-wrap>
				</p>
				<p>La madera tiene su mínima resistencia mecánica en condición verde y a medida que se seca, esta mejora de manera significativa; así, se tiene que la resistencia a la compresión y a la flexión se duplica cuando la humedad corresponde a 12 y 15 %. En condición verde, las especies analizadas y clasificadas de acuerdo con <xref ref-type="bibr" rid="B12">Dávalos y Bárcenas (1998)</xref>, <xref ref-type="bibr" rid="B13">Dávalos y Bárcenas (1999)</xref> y <xref ref-type="bibr" rid="B57">Sotomayor (2005)</xref> se ubicaron en un nivel medio de resistencia unitaria a la ruptura en los esfuerzos de flexión estática, compresión axial y elasticidad. Las especies se clasificaron como maderas de dureza lateral y transversal alta y muy alta; con un contenido de humedad de 12 % (valor usado internacionalmente para fines de comparación).</p>
				<p>A medida que la madera se seca por debajo del SFP, las paredes celulares se vuelven más duras y rígidas; en consecuencia, hay un aumento de las propiedades mecánicas, excepto de la tenacidad. Las resistencias unitarias a la ruptura en flexión estática, se clasificaron como altas y muy altas, la elasticidad de alta a muy alta (<xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B30">Honorato y Fuentes 2001</xref>); lo que evidencia que son maderas muy rígidas que tienden a deformarse poco. El módulo de elasticidad en el sentido longitudinal puede ser hasta 100 veces mayor que en el sentido perpendicular; y en el sentido radial, el módulo de elasticidad es dos veces más grande que en el tangencial. Las resistencias unitarias a la compresión axial fueron medias, en tanto que a la compresión perpendicular se clasificaron como altas (<xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B30">Honorato y Fuentes 2001</xref>).</p>
				<p>Los valores de trabajo a la carga máxima resultaron con buena capacidad de amortiguamiento y alta resiliencia; presentaron su mayor resistencia al impacto en el plano tangencial más que en el radial, lo cual indica que son maderas de alta tenacidad, difíciles a la separación de las fibras.</p>
				<p>Con los resultados de la caracterización física y mecánica combinados con información de estudios de anatomía de la madera (<xref ref-type="bibr" rid="B41">Pérez-Olvera, y Dávalos-Sotelo, 2008</xref>; <xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B30">Honorato y Fuentes 2001</xref>), se dedujo que las maderas analizadas son aptas para utilizarlas en la elaboración de productos con valor agregado como estructuras para la construcción, pisos industriales, artículos deportivos, así como en artesanías y muebles por sus características estéticas, diferentes tonalidades de color, veteado pronunciado, textura gruesa y porosidad anular que proporcionan vistosas superficies en corte tangencial que son de gran relevancia en ebanistería y chapa.</p>
				<p>El hilo recto que presentan las especies de <italic>Quercus</italic> determina la facilidad para trabajar su madera en la elaboración de artículos torneados, tallados y labrados (<xref ref-type="bibr" rid="B42">Pérez-Olvera <italic>et al</italic>., 2015</xref>); además de, usarla en tonelería, durmientes y carbón. Este último a partir de los residuos que se generan en los aprovechamientos y en la industria del aserrío en forma de ramas, puntas, tocones, taxones arbustivos con crecimientos sinuosos, cortezas, recortes, tiras y aserrín. La característica más importante que define la calidad y cantidad de braza que se forma durante la combustión, es la cantidad de carbono fijo (mayor a 70 %), ligado a otras propiedades y características de los encinos como su densidad alta, bajos contenidos de ceniza (3-6 %), materiales volátiles (15 %) y poder calorífico entre 30-33 MJ kg<sup>-1</sup>; valores que representan fuentes importantes de energía (<xref ref-type="bibr" rid="B8">Bautista <italic>et al.</italic>, 2017</xref>; <xref ref-type="bibr" rid="B15">De la Cruz <italic>et al.</italic>, 2020</xref>).</p>
			</sec>
			<sec>
				<title>Caracterización química de la madera</title>
				<p>Es relevante conocer la composición química de la madera, la cual en una misma especie varía según la parte del árbol: raíz, tallo o rama; del tipo de madera: normal, tensión o compresión; de la ubicación geográfica, clima y condiciones del suelo (<xref ref-type="bibr" rid="B44">Pettersen, 1984</xref>). En investigaciones realizadas en el INIFAP, se ha determinado que el contenido de los compuestos químicos puede ser un poco mayor en las ramas que en la madera a 1.30 m de altura del tronco principal (<xref ref-type="bibr" rid="B28">Honorato y Hernández, 1998</xref>). La pared celular de maderas suaves y duras está compuesta, principalmente, por celulosa, hemicelulosa y lignina; cuyos contenidos porcentuales oscilan entre 35 y 50 %, 10-35 % y 15-40 %, respectivamente (<xref ref-type="bibr" rid="B9">Chen, 2014</xref>).</p>
				<p>La determinación de celulosa, lignina y hemicelulosa es fundamental para inferir la aplicación de la madera en diversos procesos industriales como pulpa para papel, taninos, energía, preservadores orgánicos, tableros, plásticos, entre otros (<xref ref-type="bibr" rid="B7">Bautista y Honorato, 2005</xref>; <xref ref-type="bibr" rid="B58">Tamarit y López, 2007</xref>). El éxito de las industrias que consumen una gran cantidad de madera depende del conocimiento de su composición química (<xref ref-type="bibr" rid="B26">Honorato, 2002</xref>).</p>
				<p>La diversidad de los compuestos químicos presentes en la pared celular, así como en su estructura, dificultan en algunas especies su obtención, extracción, purificación y separación. Esto conlleva a que, además de aplicar procesos clásicos de química analítica, se utilicen métodos y procesos modificados.</p>
				<p>En México, la composición química de la madera se determina, con las normas TAPPI (<italic>Technical Association of the Pulp and Paper Industry</italic>) y ASTM, las cuales se ajustan según las condiciones del material recolectado (albura, duramen, corteza o mezclas) (<xref ref-type="bibr" rid="B7">Bautista y Honorato, 2005</xref>). Para la evaluación cuantitativa de los componentes químicos se realiza un análisis aditivo, en el cual la suma de todos los componentes debe ser 100 % (<xref ref-type="bibr" rid="B58">Tamarit y López, 2007</xref>).</p>
				<p>En especies del género <italic>Pinus</italic> se ha estimado que los porcentajes de componentes químicos principales varían de 43.9-45.6 % para celulosa; 23.4-24.4 % para hemicelulosa; 66.7-70.0 % para holocelulosa; y 26.3-28.6 % para lignina (<xref ref-type="bibr" rid="B27">Honorato <italic>et al</italic>., 2016</xref>). El análisis de componentes secundarios (extractos) se ha llevado a cabo con etanol en porcentajes entre 1.02 y 1.28 % y para solubles en etanol-benceno de 3.5-12 %. El contenido de cenizas se registró entre 0.25-0.3 % (<xref ref-type="bibr" rid="B27">Honorato <italic>et al</italic>., 2016</xref>).</p>
				<p>La madera de encinos mexicanos se ha subutilizado en forma de leña y carbón, por desinformación y desconocimiento de técnicas y procedimientos adecuados para destinarlas a usos de mayor valor (<xref ref-type="bibr" rid="B28">Honorato y Hernández, 1998</xref>; <xref ref-type="bibr" rid="B54">Santacruz y Espejel, 2004</xref>). Las determinaciones de sus compuestos químicos principales evidencian que el contenido de celulosa es de 37 a 56 %; hemicelulosa de 22-30 %; y lignina de 18-22 %. Los pentosanos se cuantificaron en la proporción de 18-23 % (Honorato, 1998; <xref ref-type="bibr" rid="B26">Honorato, 2002</xref>; <xref ref-type="bibr" rid="B5">Bárcenas <italic>et al</italic>., 2008</xref>).</p>
				<p>El contenido de extractivos de encinos se ha estudiado muy poco debido a la dificultad que hay para su purificación y el aislamiento de sustancias. Sin embargo, se ha determinado que la importancia de esos compuestos radica en la influencia que ejercen sobre otras propiedades, características y tratamientos de la madera. Altas concentraciones de extractivos y bajos valores de pH en la madera tienen un efecto negativo en los procesos de acabado y en la aplicación de adhesivos (<xref ref-type="bibr" rid="B28">Honorato y Hernández, 1998</xref>, <xref ref-type="bibr" rid="B26">Honorato, 2002</xref>).</p>
				<p>Los extraíbles solubles en madera y corteza se han hecho con solventes como el etanol-benceno y el hidróxido de sodio (NaOH) al 1 %, además de utilizar agua caliente. Con esta última aplicada en cortezas se obtuvo que el contenido de extraíbles varió entre 10.92 y 21.25 % en proporción al peso total de la muestra de madera; cuando se usó madera, los valores fueron de 4.61 a 10.0 %. Con etanol-benceno en ambos tipos de materiales los contenidos fueron de 5-13.23 % y de 1.14-5.24 %, respectivamente. Al usar una solución de NaOH al 1 % en corteza las concentraciones variaron de 31 a 44.90 %, y para madera de 20.89-26 % del total de los extractivos presentes. El contenido de taninos en corteza de encinos correspondió al intervalo de 5.48-54.04 %, y en madera de 0.59-33.44 % (<xref ref-type="bibr" rid="B29">Honorato <italic>et al</italic>., 2015</xref>; <xref ref-type="bibr" rid="B52">Rosales <italic>et al</italic>., 2016</xref>; <xref ref-type="bibr" rid="B1">Apolinar <italic>et al</italic>., 2017</xref>).</p>
				<p>También se ha estudiado la composición química de la madera de las siguientes especies tropicales: <italic>Ceiba pentandra</italic> (L.) Gaertn. (ceiba), <italic>Hevea brasiliensis</italic> (Willd. ex A.Juss.) Müll. Arg. (hule), <italic>Ochroma pyramidale</italic> (Cav. ex Lam.) Urb. (balsa), <italic>Cedrela odorata</italic> L. (cedro rojo), <italic>Inga spuria</italic> Humb. &amp; Bonpl. ex Willd. (vainillo), <italic>Juglans pyriformis</italic> Liebm. (nogal), <italic>Acacia pennatula</italic> (Schltdl. &amp; Cham) Benth. (huizache) y <italic>Trema micrantha</italic> (L.) Blume (capulín) (<xref ref-type="fig" rid="f1">Figura 1</xref>); el propósito de esas investigaciones fue inferir sus posibles aplicaciones como pulpa para papel, resinas y adhesivos, vainillina, carbohidratos, bioplásticos, fenoles y flavonoides, entre otras; así como conocer su potencial energético para fines de usos combustibles, el cual se midió a través del poder calorífico cuyo intervalo resultó de 17.76-18.54 MJ kg<sup>-1</sup> (<xref ref-type="bibr" rid="B26">Honorato, 2002</xref>; <xref ref-type="bibr" rid="B29">Honorato <italic>et al.</italic>, 2015</xref>; <xref ref-type="bibr" rid="B52">Rosales <italic>et al.</italic>, 2016</xref>; <xref ref-type="bibr" rid="B1">Apolinar <italic>et al.</italic>, 2017</xref>).</p>
				<p>
					<fig id="f1">
						<label>Figura 1</label>
						<caption>
							<title>Composición química de la madera de especies tropicales.</title>
						</caption>
						<graphic xlink:href="https://cienciasforestales.inifap.gob.mx/index.php/forestales/es/article/download/1086/version/955/3167/19034/2007-1132-remcf-12-s1-177-gf1.jpg"/>
						<attrib>Fuente: Honorato <italic>et al</italic>. (2015); <xref ref-type="bibr" rid="B52">Rosales <italic>et al</italic>. (2016)</xref>; <xref ref-type="bibr" rid="B1">Apolinar <italic>et al</italic>. (2017)</xref>.</attrib>
					</fig>
				</p>
				<p>La composición química de los taxones estudiados evidencia comportamientos específicos en diferentes procesos; así las especies con alto contenido de alfa-celulosa y hemicelulosa como <italic>Ceiba pentandra</italic>, <italic>Hevea brasiliensis</italic> y <italic>Ochroma pyramidale</italic> son ideales para procesos de pulpeo y bioconversión de carbohidratos.</p>
				<p>Los extractos son solubles en diferentes solventes (alcoholbenceno, acetona, etanol, agua fría, agua caliente, entre otros) y pueden clasificarse en ácidos volátiles, aceites esenciales, ácidos resinosos y polifenoles. Los extractos son modificadores de las propiedades físicas, afectan la densidad y el contenido de humedad en equilibrio de la madera y, consecuentemente, modifican de manera indirecta diversas propiedades mecánicas. También, influyen en la durabilidad, color, olor y sabor de la madera. Los extractos fenólicos proveen de resistencia a la pudrición y al ataque de insectos (<xref ref-type="bibr" rid="B14">Darmawan <italic>et al</italic>., 2011</xref>).</p>
				<p>Las especies como <italic>Ceiba pentandra</italic> y las hojas de <italic>Cedrela odorata</italic> son ricas en extractivos, esto indica algún grado de afectación en los procesos de aserrío, secado, pulpeo, maquinado, encolado y acabados de la madera (<xref ref-type="bibr" rid="B27">Honorato <italic>et al.</italic>, 2016</xref>). Los contenidos inorgánicos (cenizas) más importantes en los procesos de aserrío y trabajabilidad son los cristales y el sílice que inciden en el mayor desgaste del filo de los elementos de corte; de ahí la importancia de que <italic>Acacia pennatula</italic> (Schltdl. &amp; Cham.) Benth y <italic>Ceiba pentandra</italic> presenten contenidos de cenizas altos, entre 1.44 % y 1.59 %, respectivamente (<xref ref-type="bibr" rid="B27">Honorato <italic>et al.</italic>, 2016</xref>).</p>
				<p>La lignina, rica en carbono e hidrógeno, afecta el pulpeo y los procesos de bioconversión, ésta se utiliza principalmente en la producción de poliuretano. La cantidad de lignina y los extraíbles se relacionan, estrechamente, con el poder calorífico; por lo que las especies estudiadas y señaladas en la <xref ref-type="fig" rid="f1">Figura 1</xref>, pueden utilizarse con fines dendroenergéticos en los sectores industrial, doméstico y residencial; aunque <italic>Acacia pennatula</italic> y <italic>Ceiba pentandra</italic> registran valores altos en contenidos de cenizas que influyen en su uso como biocombustible (<xref ref-type="bibr" rid="B27">Honorato <italic>et al.</italic>, 2016</xref>).</p>
				<p>La composición química es responsable del comportamiento en los diversos procesos de transformación de la madera; por ello, es relevante determinar los componentes químicos principales de los diferentes taxones, y con base en ellos definir los usos industriales específicos que garanticen el aprovechamiento óptimo e integral de la madera.</p>
			</sec>
			<sec>
				<title>Aserrío</title>
				<p>México se caracteriza por presentar un sector forestal industrial poco desarrollado, con altos costos de producción, tecnologías obsoletas e instaladas en unidades de producción de baja a mediana capacidad, con personal poco capacitado y por usar madera en rollo sin clasificar a precios altos. En el proceso de aserrío con sierra banda o sierra sin fin, la densidad y la dureza combinadas con un contenido de humedad bajo y la presencia de incrustantes minerales en la madera son factores determinantes en los esfuerzos a que se somete la sierra durante el corte; ocasionan el desafilado, fisuras o grietas y pueden provocar la fractura de los dientes. Con la adopción de parámetros adecuados en las sierras como los ángulos del diente (<xref ref-type="fig" rid="f2">Figura 2</xref>), paso de diente, profundidad de garganta, ancho de corte, entre otros es posible obtener una buena calidad de aserrío, la cual se evalúa mediante la uniformidad en el espesor de las tablas producidas.</p>
				<p>
					<fig id="f2">
						<label>Figura 2</label>
						<caption>
							<title>Geometría de los dientes de la sierra cinta. </title>
						</caption>
						<graphic xlink:href="https://cienciasforestales.inifap.gob.mx/index.php/forestales/es/article/download/1086/version/955/3167/19035/2007-1132-remcf-12-s1-177-gf2.jpg"/>
						<attrib>α = Ángulo de limpieza o ángulo libre; β = Ángulo de diente; γ= Ángulo de corte o ángulo de ataque; σ = Ángulo frontal (γ + 90˚).</attrib>
					</fig>
				</p>
				<p>La parte más importante de las sierras son los dientes, por el hecho de constituir los elementos de corte. Existen seis problemas de gran importancia que repercuten en los beneficios potenciales del aserrío con sierras banda: la simetría de los dientes, mantenimiento de los dientes, fisuras en el centro de la hoja, torcedura de la sierra, desgaste del perfil del volante; además de la relación de velocidad y profundidad del corte, en función de la capacidad de alimentación de la garganta (<xref ref-type="bibr" rid="B65">Zavala, 2003</xref>; <xref ref-type="bibr" rid="B39">Martínez <italic>et al</italic>., 2006</xref>).</p>
				<p>Respecto al aserrío, en el INIFAP se han realizado investigaciones referentes a la competitividad de la industria de la madera aserrada, los canales de comercialización, análisis de la industria, variación de corte en madera de pino y encino, entre otros. Sobresalen las determinaciones sobre las características que deben reunir las sierras banda para procesar la madera de encino, en las que la geometría de los dientes mostrada en la <xref ref-type="fig" rid="f2">Figura 2</xref> (paso de diente, profundidad de garganta, espacio libre lateral, ángulo de corte, ángulo del diente y ángulo libre) es relevante para aumentar la resistencia al desgaste e incrementar el rendimiento, ya que se asierra mayor volumen de madera con buena calidad de corte (<xref ref-type="bibr" rid="B33">Kirbach, 1982</xref>; <xref ref-type="bibr" rid="B65">Zavala, 2003</xref>; <xref ref-type="bibr" rid="B39">Martínez <italic>et al</italic>., 2006</xref>).</p>
				<p>Con el paso de diente se determina la cantidad de trabajo que una sierra puede realizar; para maderas duras y muy duras <xref ref-type="bibr" rid="B53">Sandvik (1964)</xref> indicó que el distanciamiento óptimo del paso de diente debe ser de 1.25 a 2.75”. <xref ref-type="bibr" rid="B55">Schrewe (1983)</xref> señaló que el distanciamiento también se relaciona con el ancho y el calibre de la sierra, además del diámetro de los volantes. El paso de diente tiene que ser menor en sierras de 3&quot; a 6&quot; de ancho, calibre de 18 a 19” y diámetro de volantes de 4 a 6 pies; mientras que, un paso de diente mayor es adecuado para sierras de 12 a 16&quot; de ancho, con calibre de 12 a 13” y diámetro de volantes de 8 a 10 pies (<xref ref-type="bibr" rid="B38">Lunstrum, 1985</xref>).</p>
				<p>Para aserrar madera de encinos, <xref ref-type="bibr" rid="B20">Flores <italic>et al</italic>. (2007a)</xref> recomiendan un paso de diente de 1 a 2¼&quot; (25.4 a 57.15 mm) con base en el calibre de la sierra, a menores espesores de la sierra, se debe dar menor paso de diente (<xref ref-type="fig" rid="f2">Figura 2</xref>). <xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>. (2001)</xref> registran que el paso de diente para sierras de 8&quot; de ancho es de 1.5&quot;; Martínez <italic>et al</italic>. (2006) documentan que para sierras de 5&quot; de ancho el mejor resultado se obtiene con un paso de diente de 1.25&quot;.</p>
				<p>La función de la garganta en la sierra cinta es alojar el aserrín durante el asierre y, posteriormente, arrojarlo fuera del corte. Diversos estudios coinciden en que la profundidad de garganta apropiada para maderas duras con dientes recalcados es de 1/3 del paso de diente (<xref ref-type="bibr" rid="B53">Sandvik, 1964</xref>; <xref ref-type="bibr" rid="B55">Schrewe, 1983</xref>), o bien cercano a 10 veces el calibre de la sierra (<xref ref-type="bibr" rid="B45">Quezada, 1998</xref>). Al aserrar encino con sierras de 8&quot;, Martínez <italic>et al.</italic> (2006) obtuvieron los mejores resultados al usar una profundidad de garganta de 0.5&quot;; <xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>. (2001)</xref> refieren que con sierras de 5”, la profundidad adecuada es de 7/16”.</p>
				<p>La forma en que actúa el filo de los dientes de la sierra depende de sus ángulos (de corte, de diente y de limpieza), en relación con la densidad de la madera por aserrar, la dirección del corte por realizar (longitudinal o transversal) y el tipo de sierra. El ángulo de corte (ángulo de ataque) para maderas duras que provee buenos resultados varía de 20 a 30º (<xref ref-type="bibr" rid="B53">Sandvik, 1964</xref>; <xref ref-type="bibr" rid="B55">Schrewe, 1983</xref>; <xref ref-type="bibr" rid="B45">Quezada, 1998</xref>); los más comunes son de 20 a 22º (<xref ref-type="bibr" rid="B38">Lunstrum, 1985</xref>). En Norteamérica se utiliza un ángulo de ataque de 30º con resultados satisfactorios en sierra cinta con dientes recalcados (<xref ref-type="bibr" rid="B34">Koch, 1964</xref>). En México, al evaluar sierras de 8&quot; de ancho, se obtuvieron los mejores resultados con ángulo de ataque de 25° (<xref ref-type="bibr" rid="B39">Martínez <italic>et al.</italic>, 2006</xref>); mientras que, con sierras de 5” se lograron resultados aceptables al usar el ángulo de corte de 25 y 30º (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
				<p>Respecto al ángulo del diente, este no debe de ser muy pequeño para evitar que la punta del diente se debilite y se rompa bajo el efecto de la carga de corte, ni tan grande como para restringir la velocidad de alimentación y causar mayor consumo de energía. Martínez <italic>et al.</italic> (2006) indican que para aserrar encino con sierras de 8&quot; de ancho es ideal un ángulo de 45°; con sierras de 5&quot; de ancho, el ángulo de diente puede ser de 44°, 50° o 55° (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
				<p>El ángulo de limpieza (<xref ref-type="fig" rid="f2">Figura 2</xref>) define el corte libre y limpio de la sierra, ya que la separación entre la sierra y la madera debe empezar justamente en la punta del diente para evitar que el lomo del diente roce con la madera, lo cual causa fricción y sobrecalentamiento de los dientes. Para aserrar la madera de encino se recomienda un ángulo de limpieza de 8 a 12° (<xref ref-type="bibr" rid="B38">Lunstrum, 1985</xref>). En Norteamérica, con sierra banda ancha y dientes recalcados se usa, con buenos resultados, un ángulo de 16°. Para sierras de 8&quot; de ancho, Martínez <italic>et al.</italic> (2006) determinaron que un ángulo de 20° da buenos resultados; con sierras de 5” los ángulos de limpieza de 10, 15 y 16° fueron los recomendados (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
				<p>En cada tipo de sierra existe un espacio libre lateral para obtener el ancho de corte adecuado, este varía en función de la geometría de los dientes, el contenido de humedad, el filo de corte, la alineación del equipo y el tipo de madera por cortar. Las maderas duras requieren que el espacio libre lateral sea 25 % mayor que el calibre de la sierra (<xref ref-type="bibr" rid="B38">Lunstrum, 1985</xref>). En México, se determinó que para aserrar madera de encino el espacio libre lateral corresponde a un intervalo de 0.8 a 0.9 mm (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
				<p>Dada la dificultad de aserrar la madera del género <italic>Quercus</italic>, es recomendable endurecer la punta de corte de los dientes, para lo cual puede aplicarse un recubrimiento con materiales como: estelite 12, carburo de tungsteno, platino de cromo, vanadio y endurecimiento con alta frecuencia; con ello, se aumenta la resistencia al desgaste del diente hasta en 100 % al aserrar maderas blandas, o 12 veces más en maderas duras. En la formación de la punta de corte del diente, se adiciona alguno de los materiales señalados, excepto cuando se utilice alta frecuencia, en cuyo caso se usa el propio acero de la sierra (<xref ref-type="bibr" rid="B33">Kirbach y Bonac, 1982</xref>; <xref ref-type="bibr" rid="B32">Kirbach, 1984</xref>). La sierra con dientes recubiertos con estelite 12 presenta mayor resistencia al desafilado, lo que permite aserrar un volumen de poco más del doble de madera de encino, comparativamente con la sierra de dientes recalcados (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
			</sec>
			<sec>
				<title>Secado</title>
				<p>El proceso de eliminar el agua contenida en el interior de la madera hasta el punto en que la misma está en equilibrio higroscópico con el ambiente en el que se utilizará, se le conoce como secado. Es óptimo cuando la madera se seca en tiempos cortos, al menor costo y con la mejor calidad. Es un proceso necesario para la industria maderera que se realiza poco en México; en parte porque el consumidor se resiste a pagar el sobreprecio. Alrededor de 80 % de la producción de madera se comercializa recién aserrada o secada al aire libre, en este caso la madera solo alcanza valores de humedad en equilibrio con el ambiente (<xref ref-type="bibr" rid="B25">Fuentes <italic>et al</italic>., 2008</xref>); para obtener contenidos de humedad menores, se debe recurrir al secado artificial mediante estufas de secado convencional (<xref ref-type="bibr" rid="B31">JUNAC, 1989</xref>).</p>
				<p>Para el secado artificial o convencional de maderas latifoliadas como el encino, especies tropicales o de eucalipto, se tiene que considerar la heterogeneidad de sus características anatómicas y físicas.</p>
				<p>
					<xref ref-type="bibr" rid="B63">Zavala (2000)</xref> refiere que las maderas duras tienen numerosos elementos de radio, grandes y amplios con uniones intercelulares más débiles, lo que favorece la aparición de rajaduras y deformaciones durante el secado al cambiar la temperatura, la humedad relativa y la velocidad del aire a condiciones más secantes. Estas maderas duras presentan contracciones altas y desiguales que favorecen esfuerzos internos excesivos; y por tanto, la severidad en los defectos es mayor, contrario a lo que ocurre con el secado de las coníferas. Una forma de minimizar defectos como rajaduras, grietas, deformaciones, apanalamiento y colapso en la madera de encinos es mediante un secado lento y a veces con un presecado (<xref ref-type="bibr" rid="B63">Zavala, 2000</xref>).</p>
				<p>Las maderas con altos contenidos de tílides son difíciles de secar, ya que se obstruye el flujo hídrico al reducir el diámetro de vaso haciéndolas impermeables, por lo que necesitan mayor tiempo de secado. Las tílides son comunes en el duramen de muchas angiospermas y en los vasos de madera de especies de clima templado como los encinos (<xref ref-type="bibr" rid="B36">Kollmann y Coté, 1968</xref>); la alta densidad básica y CH altos inducen a un secado prolongado.</p>
				<p>En el INIFAP se han desarrollado programas de secado en estufa convencional, con temperaturas menores a 100 °C para maderas de especies latifoliadas y de coníferas (<xref ref-type="bibr" rid="B24">Fuentes <italic>et al.</italic>, 1997</xref>). En su generación se consideraron las variables de secado, las características anatómicas (porosidad, distribución de los vasos, orientación del hilo, contenidos celulares, proporción de albura-duramen) y las propiedades físicas (contenido de humedad, densidad, contracciones, anisotropía y punto de saturación de la fibra) para obtener madera seca de calidad (<xref ref-type="bibr" rid="B24">Fuentes <italic>et al</italic>., 1997</xref>; <xref ref-type="bibr" rid="B63">Zavala, 2000</xref>).</p>
				<p>Los problemas de secado de las maderas tropicales en estufa convencional, también se atribuyen a la dificultad para tener volúmenes grandes de una misma especie y a los costos altos que implica la extracción de pequeños volúmenes. Al respecto, se determinó que la mejor forma de secarlas es formando grupos de especies con valores similares de densidad básica, de contenido de humedad inicial y de espesor de tablas (<xref ref-type="bibr" rid="B63">Zavala, 2000</xref>) (<xref ref-type="table" rid="t3">Cuadro 3</xref>), lo cual conduce a una baja intensidad de defectos después del secado.</p>
				<p>
					<table-wrap id="t3">
						<label>Cuadro 3</label>
						<caption>
							<title>Programas de secado para maderas de especies tropicales y de encinos.</title>
						</caption>
						<table style="border-collapse: collapse; width: 100%">
							<colgroup>
								<col/>
								<col/>
								<col/>
								<col/>
							</colgroup>
							<thead>
								<tr>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center">Especie</th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center">Espesor <break/>(pulg)</th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center">Programa de <break/>secado</th>
									<th  style="border-bottom: solid thin; border-top: solid thin" align="center">Db <break/>(g cm<sup>-3</sup>)</th>
								</tr>
							</thead>
							<tbody>
								<tr>
									<td align="left"><italic>Bombax ellipticum</italic> Kunth.</td>
									<td align="center">4/4</td>
									<td align="center">Inglesa H</td>
									<td align="center">0.44</td>
								</tr>
								<tr>
									<td align="left"><italic>Brosimum alicastrum</italic> Sw.</td>
									<td align="center">4/4</td>
									<td align="center">T7 B3</td>
									<td align="center">0.73</td>
								</tr>
								<tr>
									<td align="left"><italic>Bucida buceras</italic> (L.)</td>
									<td align="center">4/4</td>
									<td align="center">Inglesa C</td>
									<td align="center">0.85</td>
								</tr>
								<tr>
									<td align="left"><italic>Bursera simaruba</italic> (L.) Sarg.</td>
									<td align="center">4/4</td>
									<td align="center">Inglesa D</td>
									<td align="center">0.41</td>
								</tr>
								<tr>
									<td align="left"><italic>Calophyllum brasiliense</italic> Cambess</td>
									<td align="center">4/4</td>
									<td align="center">T3 D4</td>
									<td align="center">0.55</td>
								</tr>
								<tr>
									<td align="left"><italic>Cedrela odorata</italic> (L.)</td>
									<td align="center">4/4</td>
									<td align="center">Inglesa F</td>
									<td align="center">0.36</td>
								</tr>
								<tr>
									<td align="left"><italic>Cordia dodecandra</italic> A. DC.</td>
									<td align="center">6/4</td>
									<td align="center">Inglesa C</td>
									<td align="center">0.89</td>
								</tr>
								<tr>
									<td align="left"><italic>Cordia eleagnoides</italic> (Ruiz &amp; Pav.) Oken</td>
									<td align="center">6/4</td>
									<td align="center">Inglesa C</td>
									<td align="center">0.53</td>
								</tr>
								<tr>
									<td align="left"><italic>Enterolobium cyclocarpum</italic> (Jacq.)Griseb.</td>
									<td align="center">4/4</td>
									<td align="center">T8 F4</td>
									<td align="center">0.35</td>
								</tr>
								<tr>
									<td align="left"><italic>Lysiloma bahamensis</italic> Benth.</td>
									<td align="center">4/4</td>
									<td align="center">T3 C2</td>
									<td align="center">0.63</td>
								</tr>
								<tr>
									<td align="left"><italic>Lonchocarpus castilloi</italic> Standl.</td>
									<td align="center">6/4</td>
									<td align="center">Inglesa G</td>
									<td align="center">0.74</td>
								</tr>
								<tr>
									<td align="left"><italic>Manilkara zapota</italic> (L.) P. Royen</td>
									<td align="center">4/4</td>
									<td align="center">Inglesa R</td>
									<td align="center">0.90</td>
								</tr>
								<tr>
									<td align="left"><italic>Metopium brownei</italic> (Jacq.) Urb.</td>
									<td align="center">4/4</td>
									<td align="center">InglesaC; T3 D3</td>
									<td align="center">0.89</td>
								</tr>
								<tr>
									<td align="left"><italic>Piscidia comunis</italic> (Blake) L. M. Jchnst.</td>
									<td align="center">4/4</td>
									<td align="center">Inglesa E</td>
									<td align="center">0.68</td>
								</tr>
								<tr>
									<td align="left"><italic>Platimiscium yucatanum</italic> Standl.</td>
									<td align="center">4/4</td>
									<td align="center">Inglesa C</td>
									<td align="center">0.67</td>
								</tr>
								<tr>
									<td align="left"><italic>Schizolobium parahybum</italic> (Vell.) Blake</td>
									<td align="center">4/4</td>
									<td align="center">T5 F4</td>
									<td align="center">0.30</td>
								</tr>
								<tr>
									<td align="left"><italic>Simarouba</italic> glauca DC.</td>
									<td align="center">4/4</td>
									<td align="center">InglesaD; T9 A3</td>
									<td align="center">0.46</td>
								</tr>
								<tr>
									<td align="left"><italic>Swietenia macrophylla</italic> King.</td>
									<td align="center">4/4</td>
									<td align="center">T8 D5</td>
									<td align="center">0.42</td>
								</tr>
								<tr>
									<td align="left"><italic>Terminalia amazonia</italic> (J.F. Gmel.) Exell</td>
									<td align="center">3/4</td>
									<td align="center">T2 C3</td>
									<td align="center">0.66</td>
								</tr>
								<tr>
									<td align="left"><italic>Quercus</italic> sp</td>
									<td align="center">4/4</td>
									<td align="center">T4 D2</td>
									<td align="center">0.72</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>laurina</italic> Humb. &amp; Bonpl.</td>
									<td align="center">4/4</td>
									<td align="center">Especial Modif I</td>
									<td align="center">0.73</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>crassifolia</italic> Bonpl.</td>
									<td align="center">4/4</td>
									<td align="center">Especial Modif I</td>
									<td align="center">0.76</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>potosina</italic> Trel. Mem.</td>
									<td align="center">4/4</td>
									<td align="center">Especial Modif I</td>
									<td align="center">0.76</td>
								</tr>
								<tr>
									<td align="left"><italic>Q</italic>. <italic>affinis</italic> Scheidw non M.Martens &amp; Galeotti</td>
									<td align="center">4/4</td>
									<td align="center">Especial Modif I</td>
									<td align="center">0.74</td>
								</tr>
								<tr>
									<td style="border-bottom: solid thin;" align="left"><italic>Q</italic>. <italic>falcata</italic> Michaux</td>
									<td style="border-bottom: solid thin;" align="center">4/4</td>
									<td style="border-bottom: solid thin;" align="center">T4 D2</td>
									<td style="border-bottom: solid thin;" align="center">0.59</td>
								</tr>
							</tbody>
						</table>
						<table-wrap-foot>
							<fn id="TFN5">
								<p>Pulg = Pulgadas; Db = Densidad básica.</p>
							</fn>
						</table-wrap-foot>
					</table-wrap>
				</p>
				<p>
					<xref ref-type="bibr" rid="B63">Zavala (2000)</xref> desarrolló dos programas para secar una mezcla de 33 taxones tropicales agrupados por su densidad básica. El primer programa se definió para especies de densidad baja y media; el segundo para las de densidad alta. Los resultados finales en ambos programas no afectaron la calidad de la madera seca. El tiempo de secado para las maderas blandas osciló de 5 a 7 días y de 10 a 25 días para las de densidad alta. El autor concluyó que para un proceso óptimo, las maderas de densidad media a baja requieren subdividirse en otros dos grupos adicionales y las maderas de densidad alta en cuatro grupos. En el <xref ref-type="table" rid="t3">Cuadro 3</xref> se incluyen algunos programas inéditos desarrollados en el INIFAP para diferentes especies, mismos que se sustentan en los parámetros y variables que se describen en <xref ref-type="bibr" rid="B31">JUNAC (1989)</xref> y en <xref ref-type="bibr" rid="B56">Simpson (1991)</xref>.</p>
				<p>El secado es un proceso que requiere conocimientos y atención; no obstante, en las empresas ejidales, generalmente, lo lleva a cabo personal poco capacitado en el tema. Para atender las dificultades detectadas en la mediana y pequeña industria, <xref ref-type="bibr" rid="B47">Quintanar <italic>et al</italic>. (2009a</xref> y <xref ref-type="bibr" rid="B48">2009b</xref>) generaron una guía para operar una estufa de secado y un manual de secado en estufa para madera de encinos, cuyo objetivo es facilitar este proceso a los operadores de estufas en comunidades rurales. <xref ref-type="bibr" rid="B50">Quintanar <italic>et al</italic>. (2012)</xref> elaboraron un protocolo de mejora continua para incrementar la calidad del secado de la madera en estufa, el que está orientado a optimizar los recursos humanos y materiales utilizados durante el proceso; el protocolo se fundamenta en tres criterios básicos: el apilado de la madera, la operación de la estufa y la aplicación del programa de secado.</p>
				<p>El método de secado solar de madera aserrada también ha sido investigado en el INIFAP. Este consiste en un proceso intermedio entre el secado en estufa convencional y al aire libre, en el que se utiliza como fuente de calor a la energía proveniente del sol (<xref ref-type="bibr" rid="B24">Fuentes <italic>et al.</italic>, 1997</xref>). Se ha determinado que el éxito de los secadores solares está restringido a las zonas con alta radiación solar, ello favorece el secado durante el verano y al inicio del otoño (<xref ref-type="bibr" rid="B31">JUNAC, 1989</xref>). La escasez y los costos altos del combustible estimulan el interés de la industria para buscar la energía solar como fuente alternativa para secar maderas duras, ya que estas consumen de 60 a 70 % de la energía total usada en el proceso (<xref ref-type="bibr" rid="B10">Chen, 1981</xref>).</p>
				<p>Al comparar los métodos de secado solar, secado en estufa convencional y al aire libre <xref ref-type="bibr" rid="B24">Fuentes <italic>et al.</italic> (1997)</xref> señalan que secar madera de encino en secador solar tiene mayores ventajas, porque no requiere de fuertes gastos de inversión y operación, como cuando se emplean las estufas convencionales, ni de tiempos tan prolongados como al aire libre, donde además se demerita la calidad de la madera y coarta el movimiento de capital en su comercialización.</p>
				<p>Los secadores solares son eficientes en el secado de maderas suaves y, particularmente, de las maderas duras con alta propensión a desarrollar defectos y que requieren un secado lento. Las maderas duras como el encino se asierran poco en forma de tablas y tablones; en cambio, la madera de pino está disponible en diferentes medidas comerciales en todos los aserraderos de la zona centro y norte de México (<xref ref-type="bibr" rid="B25">Fuentes <italic>et al.</italic>, 2008</xref>). Por ello, al hacer la evaluación económica de un secador solar tipo invernadero con madera de pino (<xref ref-type="fig" rid="f3">Figura 3</xref>), <xref ref-type="bibr" rid="B49">Quintanar <italic>et al</italic>. (2011)</xref> y <xref ref-type="bibr" rid="B51">Quintanar (2017)</xref> obtuvieron resultados favorables con una rentabilidad de 240 %, respecto a la inversión inicial; demostraron que la recuperación del costo de inversión se obtiene en la cuarta carga de secado. Para conocer la eficiencia y el tamaño óptimo del secador solar, los autores describieron el método y cálculos de diseño, así como la evaluación por unidad de volumen secado.</p>
				<p>
					<fig id="f3">
						<label>Figura 3</label>
						<caption>
							<title>Secador solar para madera de tipo invernadero.</title>
						</caption>
						<graphic xlink:href="https://cienciasforestales.inifap.gob.mx/index.php/forestales/es/article/download/1086/version/955/3167/19036/2007-1132-remcf-12-s1-177-gf3.gif"/>
					</fig>
				</p>
				<p>En México, existen diferentes diseños de secadores solares, cada uno con sus particularidades y ventajas. El prototipo de secador generado en el INIFAP corresponde al tipo <italic>Oxford</italic> modificado, el cual se promueve como una tecnología de transferencia y ha sido adoptada por ejidos y comunidades cooperantes en diferentes estados de la república mexicana. Los resultados han sido satisfactorios para la pequeña y mediana industria (<xref ref-type="bibr" rid="B46">Quintanar, 2005</xref>; <xref ref-type="bibr" rid="B6">Bárcenas <italic>et al.</italic>, 2010</xref>).</p>
				<p>El éxito de los secadores en las comunidades rurales se atribuye a que son equipos, relativamente, económicos de construir, simples de operar y generan buena calidad de secado. Esto se explica porque la temperatura dentro del secador alcanza su valor máximo alrededor de las 14:00 horas y el aire dentro de la cámara enfría durante la noche, lo que aumenta la humedad relativa; secar durante el día y tener incrementos de humedad por las noches permite liberar o reducir las tensiones de secado, lo que favorece la calidad de la madera seca (<xref ref-type="bibr" rid="B24">Fuentes <italic>et al.</italic>, 1997</xref>).</p>
			</sec>
			<sec>
				<title>Maquinado</title>
				<p>El maquinado (trabajabilidad) de la madera consiste en la ejecución de operaciones que se realizan en la industria de segunda transformación a piezas de madera con máquinas y herramientas de corte, con la finalidad de dar las dimensiones y perfiles con la estética y calidad deseados, para su posterior utilización en la elaboración de productos terminados; además de, preparar la superficie para la aplicación de acabados artificiales (<xref ref-type="bibr" rid="B58">Tamarit y López, 2007</xref>). En este proceso, se hace la separación de astillas, virutas o aserrín mediante la acción del filo de herramientas de corte o de la fricción con lijas.</p>
				<p>A nivel industrial el maquinado es fundamental en las etapas subsecuentes de transformación de la madera; cuando se realiza de manera adecuada, se incrementa su calidad y se da mayor valor agregado al producto final (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B18">Flores y Fuentes, 2002</xref>).</p>
				<p>En México, la calidad de maquinado de la madera por taxón se determina con base en ensayos indicados en la norma ASTM D 1666-11 (<xref ref-type="bibr" rid="B3">ASTM, 2011</xref>) adaptada a las características tecnológicas de la madera y a las máquinas utilizadas en la industria forestal nacional. Los ensayos son cepillado, torneado, moldurado, barrenado y lijado; la calidad se evalúa a partir de la presencia y severidad de defectos existentes en la superficie de las probetas maquinadas.</p>
				<p>Las maderas duras de especies tropicales y del género <italic>Quercus</italic> presentan mayor dificultad para maquinarlas. Para lograr una calidad aceptable se requieren condiciones particulares de trabajo tanto de las máquinas y herramientas de corte, como de algunas características de la madera.</p>
				<p>La densidad básica de la madera se relaciona con su dureza y por tanto, con la resistencia a la penetración y al corte. Maderas más pesadas tienen un acabado al maquinado más terso y uniforme que las livianas; este fenómeno se explica porque las primeras tienen una menor proporción de espacios vacíos por unidad de volumen y mayor contenido de lignina, lo cual favorece que el colapso de la pared celular, a nivel de fibra por la acción de la punta del elemento de corte, sea menor (<xref ref-type="bibr" rid="B61">Thibaut <italic>et al</italic>., 2016</xref>); aunque también, exigen un mayor consumo de energía. Cuando la madera tiene alto CH presenta menor resistencia al corte, pero el defecto de grano apelusado se presenta con más intensidad; con bajo CH se observa el grano astillado, asimismo la resistencia al corte y el desafilado son mayores (<xref ref-type="bibr" rid="B59">Tamarit y Flores, 2012</xref>).</p>
				<p>La presencia de sílice y cristales hacen abrasiva la madera y desafila más rápido al elemento de corte. Los principales factores inherentes a las herramientas y elementos de corte que influyen en la calidad del maquinado son el tipo de acero, ángulos de corte, profundidad de corte, velocidad de corte, velocidad de alimentación y número de marcas de cuchilla por centímetro (<xref ref-type="bibr" rid="B59">Tamarit y Flores, 2012</xref>). Estas condiciones de trabajo se pueden modificar para mejorar la calidad de maquinado.</p>
				<p>El cepillado es el corte periférico realizado con las cuchillas de la máquina cepillo sobre la superficie de ambas caras de las tablas para obtener el espesor deseado, uniforme y una superficie tersa. Es la operación más importante de maquinado, ya que cualquier pieza antes de utilizarse en la elaboración de un producto final debe cepillarse, para darle valor agregado. Las maderas duras se cepillan mejor a favor del hilo y con un ángulo de corte de cuchilla ≤ 20°. En maderas de muy alta densidad, se recomienda usar cuchillas con recubrimiento de carburo de tungsteno (<xref ref-type="bibr" rid="B58">Tamarit y López, 2007</xref>; <xref ref-type="bibr" rid="B59">Tamarit y Flores, 2012</xref>).</p>
				<p>Los cepillos comerciales tienen un ángulo de corte de cuchilla de 30°, para reducirlo se debe hacer un bisel en las cuchillas. La acción de las cuchillas se distribuye sobre la pieza de madera, por lo que varía la velocidad de alimentación, o la velocidad de giro del cabezal porta cuchillas, lo cual origina un determinado número de marcas de cuchilla (NMC) por centímetro sobre la superficie cepillada (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B59">Tamarit y Flores, 2012</xref>).</p>
				<p>En maderas duras la calidad de cepillado se optimiza cuando se usa el menor ángulo de corte de cuchilla y el mayor NMC cm<sup>-1</sup> (hasta 29); para aumentar el NMC se debe reducir la velocidad de alimentación a 7 m min<sup>-1</sup>. La calidad se mejora cuando la profundidad de corte es de 1.5 mm para cepillos industriales y del doble en cepillos de menor capacidad (<xref ref-type="bibr" rid="B59">Tamarit y Flores, 2012</xref>).</p>
				<p>El torneado provee la forma o un perfil específico a una pieza de madera, haciéndola girar en un torno contra una cuchilla o gurbia, cuyo filo corta en diferentes posiciones. Se realiza para elaborar productos decorativos de alta calidad y valor agregado. Para la mejor calidad de acabado, la velocidad óptima del torno depende del diámetro de la pieza de madera por tornear y de la velocidad de avance de la cuchilla hacia la madera; se recomienda tener al menos cuatro velocidades de giro (500, 1 000, 1 500 y 3 000 rpm) (<xref ref-type="bibr" rid="B22">Flores <italic>et al</italic>., 2013</xref>). Para diámetros grandes, la velocidad de giro debe reducirse, e incrementarse cuando se torneen piezas de diámetro reducido (<xref ref-type="bibr" rid="B58">Tamarit y López, 2007</xref>).</p>
				<p>Las maderas de alta Db y textura fina, con CH de 12 a 14 % presentan la mejor calidad de torneado; con menores CH, la intensidad de los defectos es mayor. El quemado de la superficie de la madera se evita al no usar una velocidad de giro alta y con una velocidad de alimentación lenta (<xref ref-type="bibr" rid="B21">Flores <italic>et al</italic>., 2007b</xref>).</p>
				<p>Con el moldurado se da un perfil y forma predeterminado a uno o más de los bordes de las piezas de madera; para ello, se utilizan fresas montadas en máquinas trompos; es importante la tersura del corte y el detalle de la figura. Para moldurar maderas duras, la velocidad periférica debe ser de 40 a 60 m s<sup>-1</sup> en fresas con aspas de acero rápido, y de 50 a 80 m s<sup>-1</sup> con aspas de carburo de tungsteno; aplicar el mayor NMC cm<sup>-1</sup>, con una velocidad de alimentación promedio de 3 m min<sup>-1</sup> para producir molduras curvas, y de 6 m min<sup>-1</sup> para molduras rectas. La velocidad de rotación del cabezal varía de 4 000 a 10 000 rpm (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B18">Flores y Fuentes, 2002</xref>).</p>
				<p>El taladrado (barrenado) consiste en hacer una o varias perforaciones de diámetros determinados a piezas de madera, con una o varias brocas colocadas vertical u horizontalmente en una máquina taladro, en la que se desplaza la madera hacia la broca o viceversa; es útil para realizar uniones o ensambles. Para lograr uniones fuertes, el corte debe ser limpio, liso, con desgarre de fibra mínimo y de tamaño correcto. La velocidad de corte tiene que ser baja, sin exceder 3 000 rpm; la calidad se reduce a medida que se usan brocas de grandes diámetros y longitudes, ya que la vibración de la broca aumenta produciendo perforaciones de diámetro mayor al previsto (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B18">Flores y Fuentes, 2002</xref>).</p>
				<p>Para maderas de alta densidad se usan brocas de acero de alta velocidad, de acero al níquel-cromo, o de carburo de tungsteno; la velocidad de penetración debe ser lenta al momento en que la broca hace contacto con la madera, después se aumenta a 75 cm min<sup>-1</sup>, lo que evitará que se produzca una superficie quemada (<xref ref-type="bibr" rid="B58">Tamarit y López, 2007</xref>).</p>
				<p>El lijado es la acción abrasiva de una lija sobre la madera para calibrar su espesor, obtener superficies planas y lisas, para remover marcas de astilla y otros defectos; también, para igualar las piezas que han sido unidas y así, preparar la superficie para la aplicación de un acabado artificial. El abrasivo común es la lija de papel con granos de cuarzo. En trabajos a escala industrial, se utilizan lijas de óxido de aluminio.</p>
				<p>La velocidad de la lija se relaciona con la cantidad de madera por remover, una alta velocidad produce una superficie lisa y tersa, además requiere menos energía por volumen removido. El lijado se realiza en dirección paralela al grano, las tablas se lijan primero con lijas gruesas (No. 60 u 80) para remover defectos; enseguida, para dar el acabado final, se usan lijas finas (No. 100 o 120) (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B58">Tamarit y López, 2007</xref>).</p>
				<p>En diversas investigaciones llevadas a cabo por investigadores del INIFAP se presenta la calidad de maquinado para 37 especies de maderas duras (Db ≥ 0.55 g cm<sup>3</sup>) (<xref ref-type="bibr" rid="B16">Flores y Fuentes, 1995</xref>; <xref ref-type="bibr" rid="B64">Zavala y Vázquez, 2001</xref>; <xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B19">Flores y Fuentes, 2002</xref>; <xref ref-type="bibr" rid="B21">Flores <italic>et al</italic>., 2007b</xref>; <xref ref-type="bibr" rid="B58">Tamarit y López, 2007</xref>; <xref ref-type="bibr" rid="B22">Flores <italic>et al</italic>., 2013</xref>).</p>
				<p>Resalta la necesidad de estudiar el maquinado de la madera de otros taxones presentes en bosques naturales y en plantaciones comerciales; además de, nuevos materiales a base de madera natural o modificada química o termomecánicamente, productos bioingenieriles como tableros, laminados y otros elaborados a partir de residuos agrícolas. También, se debe evaluar el desempeño de nuevos materiales (aleaciones) en forma de inserciones o recubrimientos en los elementos de corte y su relación con la calidad de la superficie maquinada, el efecto en el consumo de energía y en el nivel de desperdicios generados. Otra área por explorar es el desempeño de procesos de maquinado automatizados mediante sensores y control numérico computarizado (<xref ref-type="bibr" rid="B61">Thibaut <italic>et al</italic>., 2016</xref>; <xref ref-type="bibr" rid="B40">Nasir y Cool, 2018</xref>).</p>
			</sec>
		</sec>
		<sec>
			<title>Perspectivas de investigación</title>
			<p>Los estudios xilotecnológicos realizados a la fecha en el INIFAP y en otras instituciones pares representan solo una fracción, con respecto al total de especies arbóreas de México. Es importante incrementar el número de estudios básicos orientados a caracterizar tecnológicamente la madera de especies de bosques y selvas naturales, así como de plantaciones comerciales que por su abundancia tienen potencial para su aprovechamiento comercial maderable; además las características xilotecnológicas determinan su respuesta y aptitud a diferentes procesos de transformación.</p>
			<p>Asimismo, es fundamental que se actualicen protocolos de mejores prácticas de aserrío, secado y maquinado en los que se consideren las características de la industria forestal mexicana y las propiedades xilotecnológicas y dimensiones de las especies maderables; esto contribuirá, en alguna medida, a la reducción de la obsolescencia de las prácticas en la industria forestal. En estos trabajos es fundamental que se involucren las empresas de productos forestales, así como los productores de la materia prima mediante la aportación de recursos y de materia prima para la ejecución de investigaciones.</p>
			<p>Aunque en el INIFAP se ha realizado investigación sobre el aprovechamiento óptimo de residuos lignocelulósicos y de otras fuentes de biomasa; aún están pendientes el diseño innovador de nuevos bioproductos ingenieriles mixtos a base de madera; el análisis de ciclos de vida de los bioprocesos y dendroproductos; la optimización de procesos para la generación de dendroenergía a partir de biomasas verdes; la exploración de tratamientos termoquímicos a las maderas; el aprovechamiento sostenible de productos forestales no maderables; así como la generación, adopción y adaptación de tecnologías nuevas e innovadoras. Estos temas, actualmente, son incipientes en las líneas de investigación del Instituto, por lo que representan un amplio campo de acción y una ventana de oportunidad; y al mismo tiempo constituyen un reto para ulteriores estudios.</p>
			<p>Adicionalmente, deben priorizarse líneas de investigación estratégicas que coadyuven a la innovación, crecimiento, desarrollo, competitividad y sostenibilidad de la industria forestal; tales como: la modificación de la madera para hacerla un material más durable, estable y competitivo; reciclado de materiales que en la actualidad se consideran residuos; la cuantificación de subproductos procedentes de biorrefinerías de residuos lignocelulósicos y bioenergías; la nanotecnología en las industrias de productos forestales.</p>
			<p>Todos los temas y líneas referidas, en forma enunciativa más no limitativa, pueden integrar una agenda de investigación actualizada en ciencia y tecnología de la madera, misma que está en concordancia con <xref ref-type="bibr" rid="B60">Teischinger (2010)</xref> e implican conceptos como biotecnologías, ecoeficiencia, bioeconomía, entre otros; los cuales están orientados a tener un balance entre el desarrollo tecnológico, la conservación ambiental y el desarrollo socioeconómico.</p>
			<p>Respecto a la industria forestal mexicana, es fundamental que se inicie un proceso gradual de transición para que se incorpore y aproveche todo el potencial del paradigma de la industria 4.0 (cuarta revolución industrial), en la cual de acuerdo con <xref ref-type="bibr" rid="B37">Legg <italic>et al</italic>. (2021)</xref>, se adoptan, incorporan y combinan tanto tecnologías, como técnicas emergentes sofisticadas de vanguardia; así como aplicaciones industriales recientes y afines de índole diversa que posibilitan que las empresas madereras sean más eficaces y competitivas.</p>
		</sec>
	</body>
	<back>
		<ref-list>
			<title>Referencias</title>
			<ref id="B1">
				<mixed-citation>Apolinar H., F., J. A. Honorato S. y G. Colotl H. 2017. Caracterización energética de la madera de <italic>Acacia pennatula</italic> Schltdl. &amp; Cham. y <italic>Trema micrantha</italic> (L.) Blume. Revista Mexicana de Ciencias Forestales 8(39): 71-81. Doi:https://doi.org/10.29298/rmcf.v8i39.44.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Apolinar H.</surname>
							<given-names>F.</given-names>
						</name>
						<name>
							<surname>Honorato S.</surname>
							<given-names>J. A.</given-names>
						</name>
						<name>
							<surname>Colotl H.</surname>
							<given-names>G.</given-names>
						</name>
					</person-group>
					<year>2017</year>
					<article-title>Caracterización energética de la madera de Acacia pennatula Schltdl. &amp; Cham. y Trema micrantha (L.) Blume</article-title>
					<source>Revista Mexicana de Ciencias Forestales</source>
					<volume>8</volume>
					<issue>39</issue>
					<fpage>71</fpage>
					<lpage>81</lpage>
					<pub-id pub-id-type="doi">10.29298/rmcf.v8i39.44</pub-id>
				</element-citation>
			</ref>
			<ref id="B2">
				<mixed-citation>American Society for Testing and Materials (ASTM). 1992. Standard methods of testing small clear specimens of timber. Book of ASTM Standards 143. Vol. 04.09. Wood American Society for Testing and Materials. Philadelphia, PA, USA. pp. 37-78.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<collab>American Society for Testing and Materials (ASTM).</collab>
					</person-group>
					<year>1992</year>
					<source>Standard methods of testing small clear specimens of timber</source>
					<volume>04.09</volume>
					<publisher-name>Wood American Society for Testing and Materials</publisher-name>
					<publisher-loc>Philadelphia, PA, USA</publisher-loc>
					<fpage>37</fpage>
					<lpage>78</lpage>
				</element-citation>
			</ref>
			<ref id="B3">
				<mixed-citation>American Society for Testing and Materials (ASTM). 2011. Annual book of ASTM standards. ASTM D-1666-11 Standard methods of conducting machining tests of wood and wood-based materials (reapproved 1994). Philadelphia, PA USA. pp. 226-245.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<collab>American Society for Testing and Materials (ASTM).</collab>
					</person-group>
					<year>2011</year>
					<source>Annual book of ASTM standards. ASTM D-1666-11 Standard methods of conducting machining tests of wood and wood-based materials (reapproved 1994)</source>
					<publisher-loc>Philadelphia, PA USA</publisher-loc>
					<fpage>226</fpage>
					<lpage>245</lpage>
				</element-citation>
			</ref>
			<ref id="B4">
				<mixed-citation>L’A Association Francaise de Normalization NFB (AFN). 1985. Norme Francaise, bois essai de Choc ou flexion dynamique. NFB51-009. Paris, France. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://m.boutique.afnor.org/xml/910127/false">https://m.boutique.afnor.org/xml/910127/false</ext-link>
					</comment> (15 de diciembre de 2020).</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<collab>L’A Association Francaise de Normalization NFB (AFN).</collab>
					</person-group>
					<year>1985</year>
					<source>Norme Francaise, bois essai de Choc ou flexion dynamique</source>
					<publisher-loc>Paris, France</publisher-loc>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://m.boutique.afnor.org/xml/910127/false">https://m.boutique.afnor.org/xml/910127/false</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-12-15">15 de diciembre de 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B5">
				<mixed-citation>Bárcenas P., G. M., R. Ríos V., J. R. Aguirre R., B. I. Juárez F. y J. A. Honorato S. 2008. Composición química y densidad básica relativa de la madera de dos especies arbustivas de encino blanco de la Sierra de Álvarez, SLP, México. Madera y Bosques 14(3): 81-94. Doi: https://doi.org/10.21829/myb.2008.1431207.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Bárcenas P.</surname>
							<given-names>G. M.</given-names>
						</name>
						<name>
							<surname>Ríos V.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Aguirre R.</surname>
							<given-names>J. R.</given-names>
						</name>
						<name>
							<surname>Juárez F.</surname>
							<given-names>B. I.</given-names>
						</name>
						<name>
							<surname>Honorato S.</surname>
							<given-names>J. A.</given-names>
						</name>
					</person-group>
					<year>2008</year>
					<article-title>Composición química y densidad básica relativa de la madera de dos especies arbustivas de encino blanco de la Sierra de Álvarez, SLP, México</article-title>
					<source>Madera y Bosques</source>
					<volume>14</volume>
					<issue>3</issue>
					<fpage>81</fpage>
					<lpage>94</lpage>
					<pub-id pub-id-type="doi">10.21829/myb.2008.1431207</pub-id>
				</element-citation>
			</ref>
			<ref id="B6">
				<mixed-citation>Bárcenas P., G. M., J. L. Martínez C., R. Rodríguez A., y J. Quintanar O. 2010. Estufa solar de secado de madera. Paquete tecnológico. Comisión Nacional Forestal. Xalapa, Ver. México. 33 p. <comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.conafor.gob.mx/BIBLIOTECA/secado-madera.pdf">http://www.conafor.gob.mx/BIBLIOTECA/secado-madera.pdf</ext-link>
					</comment> (15 de diciembre 2020).</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Bárcenas P.</surname>
							<given-names>G. M.</given-names>
						</name>
						<name>
							<surname>Martínez C.</surname>
							<given-names>J. L.</given-names>
						</name>
						<name>
							<surname>Rodríguez A.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<year>2010</year>
					<source>Estufa solar de secado de madera</source>
					<publisher-name>Paquete tecnológico</publisher-name>
					<publisher-name>Comisión Nacional Forestal</publisher-name>
					<publisher-loc>Xalapa, Ver. México</publisher-loc>
					<fpage>33</fpage>
					<lpage>33</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.conafor.gob.mx/BIBLIOTECA/secado-madera.pdf">http://www.conafor.gob.mx/BIBLIOTECA/secado-madera.pdf</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-12-15">15 de diciembre 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B7">
				<mixed-citation>Bautista H., R. y J. A. Honorato S. 2005. Composición química de la madera de cuatro especies del género <italic>Quercus</italic>. Ciencia Forestal en México 30(98): 25-50. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/853">https://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/853</ext-link>
					</comment> (1 de septiembre de 2020).</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Bautista H.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Honorato S.</surname>
							<given-names>J. A.</given-names>
						</name>
					</person-group>
					<year>2005</year>
					<article-title>Composición química de la madera de cuatro especies del género Quercus</article-title>
					<source>Ciencia Forestal en México</source>
					<volume>30</volume>
					<issue>98</issue>
					<fpage>25</fpage>
					<lpage>50</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/853">https://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/853</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-09-01">1 de septiembre de 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B8">
				<mixed-citation>Bautista V., U., F. Ruíz A., W. Santiago G. y W. Santiago J. 2017. Evaluación de la calidad de carbón vegetal elaborado a partir de madera de encino en horno de ladrillo. Revista Mexicana de Agroecosistemas 4(2): 127-137. 2007-9559. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://www.resesrxhgate.net/profile/Faustino-Ruiz-Aquino/publication/322964063_EVALUACIO_DE_LA_CALIDAD_DEL_CARBOB_VEGETAL_ELABORADO_A_PARTUR_DE_MADERA_DE_ENCINI_EN_HORNO_DE_LADRILLO/links/5a3b3188458515a77aa8e8c7/EVALUACION-DE-LA-CALIDAD-DEL-CARBON-VEGETAL-ELABORADO-A-PARTIR-DE-MADERA-DE-ENCINO-EN-HORNO-DE-LADRILLO.pdf">https://www.resesrxhgate.net/profile/Faustino-Ruiz-Aquino/publication/322964063_EVALUACIO_DE_LA_CALIDAD_DEL_CARBOB_VEGETAL_ELABORADO_A_PARTUR_DE_MADERA_DE_ENCINI_EN_HORNO_DE_LADRILLO/links/5a3b3188458515a77aa8e8c7/EVALUACION-DE-LA-CALIDAD-DEL-CARBON-VEGETAL-ELABORADO-A-PARTIR-DE-MADERA-DE-ENCINO-EN-HORNO-DE-LADRILLO.pdf</ext-link>
					</comment> (4 de agosto de 2021).</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Bautista V.</surname>
							<given-names>U.</given-names>
						</name>
						<name>
							<surname>Ruíz A.</surname>
							<given-names>F.</given-names>
						</name>
						<name>
							<surname>Santiago G.</surname>
							<given-names>W.</given-names>
						</name>
						<name>
							<surname>Santiago J.</surname>
							<given-names>W.</given-names>
						</name>
					</person-group>
					<year>2017</year>
					<article-title>Evaluación de la calidad de carbón vegetal elaborado a partir de madera de encino en horno de ladrillo</article-title>
					<source>Revista Mexicana de Agroecosistemas</source>
					<volume>4</volume>
					<issue>2</issue>
					<fpage>127</fpage>
					<lpage>137</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://www.resesrxhgate.net/profile/Faustino-Ruiz-Aquino/publication/322964063_EVALUACIO_DE_LA_CALIDAD_DEL_CARBOB_VEGETAL_ELABORADO_A_PARTUR_DE_MADERA_DE_ENCINI_EN_HORNO_DE_LADRILLO/links/5a3b3188458515a77aa8e8c7/EVALUACION-DE-LA-CALIDAD-DEL-CARBON-VEGETAL-ELABORADO-A-PARTIR-DE-MADERA-DE-ENCINO-EN-HORNO-DE-LADRILLO.pdf">https://www.resesrxhgate.net/profile/Faustino-Ruiz-Aquino/publication/322964063_EVALUACIO_DE_LA_CALIDAD_DEL_CARBOB_VEGETAL_ELABORADO_A_PARTUR_DE_MADERA_DE_ENCINI_EN_HORNO_DE_LADRILLO/links/5a3b3188458515a77aa8e8c7/EVALUACION-DE-LA-CALIDAD-DEL-CARBON-VEGETAL-ELABORADO-A-PARTIR-DE-MADERA-DE-ENCINO-EN-HORNO-DE-LADRILLO.pdf</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2021-08-04">4 de agosto de 2021</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B9">
				<mixed-citation>Chen, H. 2014. Chemical composition and structure of natural lignocellulose. <italic>In</italic>: Chen, H. (comp.). Biotechnology of lignocellulose: theory and practice. Springer. Dordrecht, The Netherlands. pp. 25-71. Doi: <ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1007/978-94-007-6898-7_2">https://doi.org/10.1007/978-94-007-6898-7_2</ext-link>.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Chen</surname>
							<given-names>H.</given-names>
						</name>
					</person-group>
					<year>2014</year>
					<chapter-title>Chemical composition and structure of natural lignocellulose</chapter-title>
					<person-group person-group-type="author">
						<name>
							<surname>Chen</surname>
							<given-names>H.</given-names>
						</name>
					</person-group>
					<source>Biotechnology of lignocellulose: theory and practice</source>
					<publisher-name>Springer</publisher-name>
					<publisher-loc>Dordrecht, The Netherlands</publisher-loc>
					<fpage>25</fpage>
					<lpage>71</lpage>
					<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1007/978-94-007-6898-7_2">https://doi.org/10.1007/978-94-007-6898-7_2</ext-link>
				</element-citation>
			</ref>
			<ref id="B10">
				<mixed-citation>Chen, P. Y. S. 1981. Design and test of a 500 BF solar kiln. Forest Products Journal 31(3): 33-38.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Chen</surname>
							<given-names>P. Y. S.</given-names>
						</name>
					</person-group>
					<year>1981</year>
					<article-title>Design and test of a 500 BF solar kiln</article-title>
					<source>Forest Products Journal</source>
					<volume>31</volume>
					<issue>3</issue>
					<fpage>33</fpage>
					<lpage>38</lpage>
				</element-citation>
			</ref>
			<ref id="B11">
				<mixed-citation>Comisión Nacional Forestal (Conafor). 2019. El sector forestal mexicano en cifras 2019. Secretaría del Medio Ambiente y Recursos Naturales. <comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.conafor.gob.mx:8080/documentos/docs/1/7749El%20Sector%20Forestal%20Mexicano%20en%20Cifras%202019.pdf">http://www.conafor.gob.mx:8080/documentos/docs/1/7749El%20Sector%20Forestal%20Mexicano%20en%20Cifras%202019.pdf</ext-link>
					</comment> (10 de diciembre de 2020).</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<collab>Comisión Nacional Forestal (Conafor)</collab>
					</person-group>
					<year>2019</year>
					<source>El sector forestal mexicano en cifras 2019</source>
					<publisher-name>Secretaría del Medio Ambiente y Recursos Naturales</publisher-name>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.conafor.gob.mx:8080/documentos/docs/1/7749El%20Sector%20Forestal%20Mexicano%20en%20Cifras%202019.pdf">http://www.conafor.gob.mx:8080/documentos/docs/1/7749El%20Sector%20Forestal%20Mexicano%20en%20Cifras%202019.pdf</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-12-10">10 de diciembre de 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B12">
				<mixed-citation>Dávalos S., R. y G. M. Bárcenas P. 1998. Clasificación de las propiedades mecánicas de las maderas mexicanas en condición “verde”. Madera y Bosques 4(1):65-70. Doi: <ext-link ext-link-type="uri" xlink:href="https://doi.org/10.21829/myb.1998.411368">https://doi.org/10.21829/myb.1998.411368</ext-link>.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Dávalos S.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Bárcenas P.</surname>
							<given-names>G. M.</given-names>
						</name>
					</person-group>
					<year>1998</year>
					<article-title>Clasificación de las propiedades mecánicas de las maderas mexicanas en condición “verde”</article-title>
					<source>Madera y Bosques</source>
					<volume>4</volume>
					<issue>1</issue>
					<fpage>65</fpage>
					<lpage>70</lpage>
					<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.21829/myb.1998.411368">https://doi.org/10.21829/myb.1998.411368</ext-link>
				</element-citation>
			</ref>
			<ref id="B13">
				<mixed-citation>Dávalos S., R. y G. M. Bárcenas P. 1999. Clasificación de las propiedades mecánicas de las maderas en condición “seca”. Madera y Bosques 5(1): 61-69. Doi:https://doi.org/10.21829/myb.1999.511355.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Dávalos S.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Bárcenas P.</surname>
							<given-names>G. M.</given-names>
						</name>
					</person-group>
					<year>1999</year>
					<article-title>Clasificación de las propiedades mecánicas de las maderas en condición “seca”</article-title>
					<source>Madera y Bosques</source>
					<volume>5</volume>
					<issue>1</issue>
					<fpage>61</fpage>
					<lpage>69</lpage>
					<pub-id pub-id-type="doi">10.21829/myb.1999.511355</pub-id>
				</element-citation>
			</ref>
			<ref id="B14">
				<mixed-citation>Darmawan, W., I. S. Rahayu, D. Nandika and R. Marchal. 2011. Wear characteristics of wood cutting tools caused by extractives and abrasive materials in some tropical woods. Journal of Tropical Forest Science 23(3):345-353. <comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.frim.gov.my//345-353.pdf">http://www.frim.gov.my//345-353.pdf</ext-link>
					</comment> (10 de junio de 2021).</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Darmawan</surname>
							<given-names>W.</given-names>
						</name>
						<name>
							<surname>Rahayu</surname>
							<given-names>I. S.</given-names>
						</name>
						<name>
							<surname>Nandika</surname>
							<given-names>D.</given-names>
						</name>
						<name>
							<surname>Marchal</surname>
							<given-names>R.</given-names>
						</name>
					</person-group>
					<year>2011</year>
					<article-title>Wear characteristics of wood cutting tools caused by extractives and abrasive materials in some tropical woods</article-title>
					<source>Journal of Tropical Forest Science</source>
					<volume>23</volume>
					<issue>3</issue>
					<fpage>345</fpage>
					<lpage>353</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.frim.gov.my//345-353.pdf">http://www.frim.gov.my//345-353.pdf</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2021-06-10">10 de junio de 2021</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B15">
				<mixed-citation>De la Cruz M., C., J. Herrera G., I. A. Ortiz S., J. C. Ríos S., R. Rosales S. y A. Carrillo P. 2020. Caracterización energética del carbón vegetal producido en el Norte-Centro de México. Madera y Bosques 26(2), e2621971. Doi: https://doi.org/10.21829/myb.2020.2621971.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>De la Cruz M.</surname>
							<given-names>C.</given-names>
						</name>
						<name>
							<surname>Herrera G.</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Ortiz S.</surname>
							<given-names>I. A.</given-names>
						</name>
						<name>
							<surname>Ríos S.</surname>
							<given-names>J. C.</given-names>
						</name>
						<name>
							<surname>Rosales S.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Carrillo P.</surname>
							<given-names>A.</given-names>
						</name>
					</person-group>
					<year>2020</year>
					<article-title>Caracterización energética del carbón vegetal producido en el Norte-Centro de México</article-title>
					<source>Madera y Bosques</source>
					<volume>26</volume>
					<issue>2</issue>
					<elocation-id>e2621971</elocation-id>
					<pub-id pub-id-type="doi">10.21829/myb.2020.2621971</pub-id>
				</element-citation>
			</ref>
			<ref id="B16">
				<mixed-citation>Flores V., R. y M. E. Fuentes L. 1995. Características de maquinado de <italic>Quercus affinis</italic>, Q. <italic>crassifolia</italic>, Q. <italic>glabrescens</italic> y Q. <italic>mexicana</italic>. INIFAP. CIRCE. Puebla, México. Folleto científico No. 1. 14 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
					</person-group>
					<year>1995</year>
					<source>Características de maquinado de Quercus affinis, Q. crassifolia, Q. glabrescens y Q. mexicana</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRCE</publisher-name>
					<publisher-loc>Puebla, México</publisher-loc>
					<issue>1</issue>
					<fpage>14</fpage>
					<lpage>14</lpage>
				</element-citation>
			</ref>
			<ref id="B17">
				<mixed-citation>Flores V., R., M. E. Fuentes L. y J. Quintanar O. 2001. Desafilado de sierras banda en el aserrío de encinos. Ciencia Forestal en México 26(90): 55-71.<comment>
						<ext-link ext-link-type="uri" xlink:href="http://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/913">http://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/913</ext-link>
					</comment> (13 de noviembre de 2020).</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<year>2001</year>
					<article-title>Desafilado de sierras banda en el aserrío de encinos</article-title>
					<source>Ciencia Forestal en México</source>
					<volume>26</volume>
					<issue>90</issue>
					<fpage>55</fpage>
					<lpage>71</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="http://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/913">http://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/913</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-11-13">13 de noviembre de 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B18">
				<mixed-citation>Flores V., R., M. E. Fuentes L. y J. Quintanar O. 2002. Maquinado de dos especies de encino (<italic>Quercus affinis</italic> y Q. <italic>crassifolia</italic>) del estado de Guanajuato. Ciencia Forestal en México 27(91): 55-65. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/908/2162">https://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/908/2162</ext-link>
					</comment> (5 de febrero de 2021)</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<year>2002</year>
					<article-title>Maquinado de dos especies de encino (Quercus affinis y Q. crassifolia) del estado de Guanajuato</article-title>
					<source>Ciencia Forestal en México</source>
					<volume>27</volume>
					<issue>91</issue>
					<fpage>55</fpage>
					<lpage>65</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/908/2162">https://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/view/908/2162</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2021-02-05">5 de febrero de 2021</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B19">
				<mixed-citation>Flores V., R. y M. E. Fuentes L. 2002. Maquinado de la madera. <italic>In</italic>: Quintanar O., J. (Ed.). Características, propiedades y procesos de transformación de la madera de los encinos de México. INIFAP. CIRCE. Puebla, México. Libro Técnico No. 2. pp. 178-195.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
					</person-group>
					<year>2002</year>
					<chapter-title>Maquinado de la madera</chapter-title>
					<person-group person-group-type="editor">
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<source>Características, propiedades y procesos de transformación de la madera de los encinos de México</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRCE</publisher-name>
					<publisher-loc>Puebla, México</publisher-loc>
					<issue>2</issue>
					<fpage>178</fpage>
					<lpage>195</lpage>
				</element-citation>
			</ref>
			<ref id="B20">
				<mixed-citation>Flores V., R., M. E. Fuentes L., J. Quintanar O., L. Vázquez S., J. C. Tamarit U. y H. M. Rodríguez C. 2007a. Aserrío de madera de encinos de Oaxaca en un aserradero portátil. INIFAP. CIRGOC. Puebla, México. Folleto técnico No. 43. 39 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Vázquez S.</surname>
							<given-names>L.</given-names>
						</name>
						<name>
							<surname>Tamarit U.</surname>
							<given-names>J. C.</given-names>
						</name>
						<name>
							<surname>Rodríguez C.</surname>
							<given-names>H. M.</given-names>
						</name>
					</person-group>
					<year>2007</year>
					<source>Aserrío de madera de encinos de Oaxaca en un aserradero portátil</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRGOC</publisher-name>
					<publisher-loc>Puebla, México</publisher-loc>
					<issue>43</issue>
					<fpage>39</fpage>
					<lpage>39</lpage>
				</element-citation>
			</ref>
			<ref id="B21">
				<mixed-citation>Flores V., R., J. V. Rangel P., J. Quintanar O., M. E. Fuentes L. y L. Vázquez S. 2007b. Calidad de maquinado de la madera de <italic>Quercus affinis</italic> y <italic>Quercus laurina</italic>. Revista Chapingo Serie Ciencias Forestales y del Ambiente 13(1): 41-46. <comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.scielo.org.mx/pdf/rcscfa/v13n1/2007-4018-rcscfa-13-01-41.pdf">http://www.scielo.org.mx/pdf/rcscfa/v13n1/2007-4018-rcscfa-13-01-41.pdf</ext-link>
					</comment> (4 de diciembre de 2020). ISSN 2007-4018.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Rangel P.</surname>
							<given-names>J. V.</given-names>
						</name>
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Vázquez S.</surname>
							<given-names>L.</given-names>
						</name>
					</person-group>
					<year>2007</year>
					<article-title>Calidad de maquinado de la madera de Quercus affinis y Quercus laurina</article-title>
					<source>Revista Chapingo Serie Ciencias Forestales y del Ambiente</source>
					<volume>13</volume>
					<issue>1</issue>
					<fpage>41</fpage>
					<lpage>46</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.scielo.org.mx/pdf/rcscfa/v13n1/2007-4018-rcscfa-13-01-41.pdf">http://www.scielo.org.mx/pdf/rcscfa/v13n1/2007-4018-rcscfa-13-01-41.pdf</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-12-04">4 de diciembre de 2020</date-in-citation>
					<issn>2007-4018</issn>
				</element-citation>
			</ref>
			<ref id="B22">
				<mixed-citation>Flores V., R., M. E. Fuentes L., J. Quintanar O. y J. C. Tamarit U. 2013. Maquinado de cuatro especies maderables de encino de la sierra de Juárez, Oaxaca. Revista Mexicana de Ciencias Forestales 4(16): 22-33. Doi:https://doi.org/10.29298/rmcf.v4i16.438 </mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Tamarit U.</surname>
							<given-names>J. C.</given-names>
						</name>
					</person-group>
					<year>2013</year>
					<article-title>Maquinado de cuatro especies maderables de encino de la sierra de Juárez, Oaxaca</article-title>
					<source>Revista Mexicana de Ciencias Forestales</source>
					<volume>4</volume>
					<issue>16</issue>
					<fpage>22</fpage>
					<lpage>33</lpage>
					<pub-id pub-id-type="doi">10.29298/rmcf.v4i16.438</pub-id>
				</element-citation>
			</ref>
			<ref id="B23">
				<mixed-citation>Fuentes L., M. E. y R. Flores V. 1995. Propiedades físico-mecánicas de la madera de cinco especies de encino del estado de Puebla. INIFAP. CIRCE. Puebla, México. Folleto científico No. 2. 14 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
					</person-group>
					<year>1995</year>
					<source>Propiedades físico-mecánicas de la madera de cinco especies de encino del estado de Puebla</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRCE</publisher-name>
					<publisher-loc>Puebla, México</publisher-loc>
					<issue>2</issue>
					<fpage>14</fpage>
					<lpage>14</lpage>
				</element-citation>
			</ref>
			<ref id="B24">
				<mixed-citation>Fuentes L., M. E., M. Fuentes S. y F. J. Zamudio S. 1997. Análisis comparativo de tres sistemas de secado con madera de cuatro especies de encino (<italic>Quercus</italic> spp.). Revista Chapingo Serie Ciencias Forestales y del Ambiente 4(1): 155-160. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://www.academia.edu/16250082/1997_analisis_comparativo_de_tres_sistemas_de_secado_con_madera_de_cuatro_especies_de_encino_quercus_spp_">https://www.academia.edu/16250082/1997_analisis_comparativo_de_tres_sistemas_de_secado_con_madera_de_cuatro_especies_de_encino_quercus_spp_</ext-link>
					</comment> (4 de noviembre de 2020).</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>M. E.</surname>
							<given-names>Fuentes L.</given-names>
						</name>
						<name>
							<surname>Fuentes S.</surname>
							<given-names>M.</given-names>
						</name>
						<name>
							<surname>Zamudio S.</surname>
							<given-names>F. J.</given-names>
						</name>
					</person-group>
					<year>1997</year>
					<article-title>Análisis comparativo de tres sistemas de secado con madera de cuatro especies de encino (Quercus spp.)</article-title>
					<source>Revista Chapingo Serie Ciencias Forestales y del Ambiente</source>
					<volume>4</volume>
					<issue>1</issue>
					<fpage>155</fpage>
					<lpage>160</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://www.academia.edu/16250082/1997_analisis_comparativo_de_tres_sistemas_de_secado_con_madera_de_cuatro_especies_de_encino_quercus_spp_">https://www.academia.edu/16250082/1997_analisis_comparativo_de_tres_sistemas_de_secado_con_madera_de_cuatro_especies_de_encino_quercus_spp_</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-11-04">4 de noviembre de 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B25">
				<mixed-citation>Fuentes L., M. E., J. A. García S., F. J. Zamudio S. y J. A. Matus G. 2008. Políticas que afectan la competitividad de la producción de madera aserrada en México. Madera y Bosques 14(2): 29-39. Doi:https://doi.org/10.21829/myb.2008.1421210. </mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>García S.</surname>
							<given-names>J. A.</given-names>
						</name>
						<name>
							<surname>Zamudio S.</surname>
							<given-names>F. J.</given-names>
						</name>
						<name>
							<surname>Matus G.</surname>
							<given-names>J. A.</given-names>
						</name>
					</person-group>
					<year>2008</year>
					<article-title>Políticas que afectan la competitividad de la producción de madera aserrada en México</article-title>
					<source>Madera y Bosques</source>
					<volume>14</volume>
					<issue>2</issue>
					<fpage>29</fpage>
					<lpage>39</lpage>
					<pub-id pub-id-type="doi">10.21829/myb.2008.1421210</pub-id>
				</element-citation>
			</ref>
			<ref id="B26">
				<mixed-citation>Honorato S., J. A. 2002. Química de la madera de encinos. <italic>In</italic>: Quintanar O, J. (Ed.). Características, propiedades y procesos de transformación de la madera de los encinos de México. INIFAP. CIRCE. Puebla, México. Libro Técnico No. 2. pp. 86-106.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Honorato S.</surname>
							<given-names>J. A.</given-names>
						</name>
					</person-group>
					<year>2002</year>
					<chapter-title>Química de la madera de encinos</chapter-title>
					<person-group person-group-type="editor">
						<name>
							<surname>Quintanar O</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<source>Características, propiedades y procesos de transformación de la madera de los encinos de México</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRCE</publisher-name>
					<publisher-loc>Puebla, México</publisher-loc>
					<issue>2</issue>
					<fpage>86</fpage>
					<lpage>106</lpage>
				</element-citation>
			</ref>
			<ref id="B27">
				<mixed-citation>Honorato S., J. A., F. Apolinar H. y G. Colotl H. 2016. Composición lignocelulósica de <italic>Pinus ayacahuite</italic> Ehrenb. ex Schltdl., P. <italic>leiophylla</italic> Schlecht. &amp; Cham. y P. <italic>herrerae</italic> Martínez. Revista Mexicana de Ciencias Forestales 7(33): 47-56. Doi:https://doi.org/10.29298/rmcf.v7i34.82.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Honorato S.</surname>
							<given-names>J. A.</given-names>
						</name>
						<name>
							<surname>Apolinar H.</surname>
							<given-names>F.</given-names>
						</name>
						<name>
							<surname>Colotl H.</surname>
							<given-names>G.</given-names>
						</name>
					</person-group>
					<year>2016</year>
					<article-title>Composición lignocelulósica de Pinus ayacahuite Ehrenb. ex Schltdl., P. leiophylla Schlecht. &amp; Cham. y P. herrerae Martínez</article-title>
					<source>Revista Mexicana de Ciencias Forestales</source>
					<volume>7</volume>
					<issue>33</issue>
					<fpage>47</fpage>
					<lpage>56</lpage>
					<pub-id pub-id-type="doi">10.29298/rmcf.v7i34.82</pub-id>
				</element-citation>
			</ref>
			<ref id="B28">
				<mixed-citation>Honorato, S., J. A. y J. Hernández P. 1998. Determinación de componentes químicos de la madera de cinco especies de encino del estado de Puebla. Madera y Bosques 4(2): 79-93. Doi: https://doi.org/10.21829/myb.1998.421361.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Honorato, S.</surname>
							<given-names>J. A.</given-names>
						</name>
						<name>
							<surname>Hernández P.</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<year>1998</year>
					<article-title>Determinación de componentes químicos de la madera de cinco especies de encino del estado de Puebla</article-title>
					<source>Madera y Bosques</source>
					<volume>4</volume>
					<issue>2</issue>
					<fpage>79</fpage>
					<lpage>93</lpage>
					<pub-id pub-id-type="doi">10.21829/myb.1998.421361</pub-id>
				</element-citation>
			</ref>
			<ref id="B29">
				<mixed-citation>Honorato, S., J. A., G. Colotl H., F. Apolinar H. y J. Aburto 2015. Principales componentes químicos de la madera de <italic>Ceiba pentandra</italic>, <italic>Hevea brasiliensis</italic> y <italic>Ochroma pyramidale</italic>. Madera y Bosques 21(2): 131-146. Doi:https://doi.org/10.21829/myb.2015.212450.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Honorato, S.</surname>
							<given-names>J. A.</given-names>
						</name>
						<name>
							<surname>Colotl H.</surname>
							<given-names>G.</given-names>
						</name>
						<name>
							<surname>Apolinar H.</surname>
							<given-names>F.</given-names>
						</name>
						<name>
							<surname>Aburto</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<year>2015</year>
					<article-title>Principales componentes químicos de la madera de Ceiba pentandra, Hevea brasiliensis y Ochroma pyramidale</article-title>
					<source>Madera y Bosques</source>
					<volume>21</volume>
					<issue>2</issue>
					<fpage>131</fpage>
					<lpage>146</lpage>
					<pub-id pub-id-type="doi">10.21829/myb.2015.212450</pub-id>
				</element-citation>
			</ref>
			<ref id="B30">
				<mixed-citation>Honorato S., J. A. y M. E. Fuentes L. 2001. Propiedades físico-mecánicas de la madera de cinco especies de encino del estado de Guanajuato. Revista Ciencia Forestal en México 26(90): 5-28. <comment>
						<ext-link ext-link-type="uri" xlink:href="http://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/">http://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/</ext-link>
					</comment> (15 de diciembre de 2020).</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Honorato S.</surname>
							<given-names>J. A.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
					</person-group>
					<year>2001</year>
					<article-title>Propiedades físico-mecánicas de la madera de cinco especies de encino del estado de Guanajuato</article-title>
					<source>Revista Ciencia Forestal en México</source>
					<volume>26</volume>
					<issue>90</issue>
					<fpage>5</fpage>
					<lpage>28</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="http://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/">http://cienciasforestales.inifap.gob.mx/editorial/index.php/forestales/article/</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-12-15">15 de diciembre de 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B31">
				<mixed-citation>Junta del Acuerdo de Cartagena (JUNAC). 1989. Manual del Grupo Andino para el secado de maderas. Junta del Acuerdo de Cartagena. Lima, Perú. 418 p. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://books.google.com.mx/books?id=osBJAAAACAAJ">https://books.google.com.mx/books?id=osBJAAAACAAJ</ext-link>
					</comment> (10 de noviembre de 2020).</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<collab>Junta del Acuerdo de Cartagena (JUNAC).</collab>
					</person-group>
					<year>1989</year>
					<source>Manual del Grupo Andino para el secado de maderas</source>
					<publisher-name>Junta del Acuerdo de Cartagena</publisher-name>
					<publisher-loc>Lima, Perú</publisher-loc>
					<fpage>418</fpage>
					<lpage>418</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://books.google.com.mx/books?id=osBJAAAACAAJ">https://books.google.com.mx/books?id=osBJAAAACAAJ</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-11-10">10 de noviembre de 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B32">
				<mixed-citation>Kirbach, E. D. 1984. New methods for reducing saw tooth wear and maintenance. Modern Sawmill &amp; Panel Techniques 1. Vol. 1 Proceeding of North American Sawmill &amp; Panel Clinic. OR, USA. pp. 40-49.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Kirbach</surname>
							<given-names>E. D.</given-names>
						</name>
					</person-group>
					<year>1984</year>
					<source>New methods for reducing saw tooth wear and maintenance</source>
					<publisher-name>Modern Sawmill &amp; Panel Techniques</publisher-name>
					<volume>1</volume>
					<publisher-loc>OR, USA</publisher-loc>
					<fpage>40</fpage>
					<lpage>49</lpage>
				</element-citation>
			</ref>
			<ref id="B33">
				<mixed-citation>Kirbach, E. D. and T. Bonac. 1982. Dulling of sawteeth tipped with a stellite and two cobalt-cemented tungsten carbides. Forest Product Journal 32(9): 42-45.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Kirbach</surname>
							<given-names>E. D.</given-names>
						</name>
						<name>
							<surname>Bonac.</surname>
							<given-names>T.</given-names>
						</name>
					</person-group>
					<year>1982</year>
					<article-title>Dulling of sawteeth tipped with a stellite and two cobalt-cemented tungsten carbides</article-title>
					<source>Forest Product Journal</source>
					<volume>32</volume>
					<issue>9</issue>
					<fpage>42</fpage>
					<lpage>45</lpage>
				</element-citation>
			</ref>
			<ref id="B34">
				<mixed-citation>Koch, P. 1964. Wood machining processes. Donald Press Company. New York, NY, USA. 530 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Koch</surname>
							<given-names>P.</given-names>
						</name>
					</person-group>
					<year>1964</year>
					<source>Wood machining processes</source>
					<publisher-name>Donald Press Company</publisher-name>
					<publisher-loc>New York, NY, USA</publisher-loc>
					<fpage>530</fpage>
					<lpage>530</lpage>
				</element-citation>
			</ref>
			<ref id="B35">
				<mixed-citation>Kollmann, F. 1959. Tecnología de la madera y sus aplicaciones (Tomo I) Instituto Forestal de Investigación y Experiencias y Servicio de la Madera. Madrid, España. 675 p. <comment>
						<ext-link ext-link-type="uri" xlink:href="http://libros.inia.es/libros/product_info.php?products_id=658">http://libros.inia.es/libros/product_info.php?products_id=658</ext-link>
					</comment> (15 de octubre de 2020).</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Kollmann</surname>
							<given-names>F.</given-names>
						</name>
					</person-group>
					<year>1959</year>
					<source>Tecnología de la madera y sus aplicaciones</source>
					<publisher-name>Instituto Forestal de Investigación y Experiencias y Servicio de la Madera</publisher-name>
					<publisher-loc>Madrid, España</publisher-loc>
					<fpage>675</fpage>
					<lpage>675</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="http://libros.inia.es/libros/product_info.php?products_id=658">http://libros.inia.es/libros/product_info.php?products_id=658</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-10-15">15 de octubre de 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B36">
				<mixed-citation>Kollmann F. and W. A. Coté. 1968. Principles of wood science and technology. Vol 1: Solid Wood. New York, NY, USA. 592 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Kollmann</surname>
							<given-names>F.</given-names>
						</name>
						<name>
							<surname>Coté</surname>
							<given-names>W. A.</given-names>
						</name>
					</person-group>
					<year>1968</year>
					<source>Principles of wood science and technology</source>
					<volume>1</volume>
					<publisher-name>Solid Wood</publisher-name>
					<publisher-loc>New York, NY, USA</publisher-loc>
					<fpage>592</fpage>
					<lpage>592</lpage>
				</element-citation>
			</ref>
			<ref id="B37">
				<mixed-citation>Legg, B., B. Dorfner, S. Leavengood and E. Hansen. 2021. Industry 4.0 implementation in US primary wood products industry. Drvna Industrija 72(2): 143-153. Doi: https://doi.org/10.5552/drvind.2021.2017.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Legg</surname>
							<given-names>B.</given-names>
						</name>
						<name>
							<surname>Dorfner</surname>
							<given-names>B.</given-names>
						</name>
						<name>
							<surname>Leavengood</surname>
							<given-names>S.</given-names>
						</name>
						<name>
							<surname>Hansen</surname>
							<given-names>E.</given-names>
						</name>
					</person-group>
					<year>2021</year>
					<article-title>Industry 4.0 implementation in US primary wood products industry</article-title>
					<source>Drvna Industrija</source>
					<volume>72</volume>
					<issue>2</issue>
					<fpage>143</fpage>
					<lpage>153</lpage>
					<pub-id pub-id-type="doi">10.5552/drvind.2021.2017</pub-id>
				</element-citation>
			</ref>
			<ref id="B38">
				<mixed-citation>Lunstrum, S. J. 1985. Balanced saw performance. U.S. Department of Agriculture, Forest Service, Forest Products Utilization. 12. Madison, WI, USA. Technical Report No. 17 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Lunstrum</surname>
							<given-names>S. J.</given-names>
						</name>
					</person-group>
					<year>1985</year>
					<source>Balanced saw performance</source>
					<publisher-name>U.S. Department of Agriculture</publisher-name>
					<publisher-name>Forest Service</publisher-name>
					<publisher-name>Forest Products Utilization</publisher-name>
					<volume>12</volume>
					<publisher-loc>Madison, WI, USA</publisher-loc>
					<fpage>17</fpage>
					<lpage>17</lpage>
				</element-citation>
			</ref>
			<ref id="B39">
				<mixed-citation>Martínez S., M., J. Quintanar O., R. Flores V., P. Juárez T., H. E. Alanís M. y M. Alarcón B. 2006. Manual técnico para el asierre y secado de madera de encino en el estado de Chihuahua. INIFAP. CIRNOC. Chihuahua, Chih., México. Folleto técnico No. 36. 41 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Martínez S.</surname>
							<given-names>M.</given-names>
						</name>
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Juárez T.</surname>
							<given-names>P.</given-names>
						</name>
						<name>
							<surname>Alanís M.</surname>
							<given-names>H. E.</given-names>
						</name>
						<name>
							<surname>Alarcón B.</surname>
							<given-names>M.</given-names>
						</name>
					</person-group>
					<year>2006</year>
					<source>Manual técnico para el asierre y secado de madera de encino en el estado de Chihuahua</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRNOC</publisher-name>
					<publisher-loc>Chihuahua, Chih., México</publisher-loc>
					<issue>36</issue>
					<fpage>41</fpage>
					<lpage>41</lpage>
				</element-citation>
			</ref>
			<ref id="B40">
				<mixed-citation>Nasir, V. and J. Cool. 2018. A review on wood machining: characterization, optimization, and monitoring of the sawing process. Wood Material Science and Engineering 1-16. Doi: https://doi.org/10.1080/17480272.2018.1465465.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Nasir</surname>
							<given-names>V.</given-names>
						</name>
						<name>
							<surname>Cool</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<year>2018</year>
					<article-title>A review on wood machining: characterization, optimization, and monitoring of the sawing process</article-title>
					<source>Wood Material Science and Engineering</source>
					<fpage>1</fpage>
					<lpage>16</lpage>
					<pub-id pub-id-type="doi">10.1080/17480272.2018.1465465</pub-id>
				</element-citation>
			</ref>
			<ref id="B41">
				<mixed-citation>Pérez-Olvera, C. P. y R. Dávalos-Sotelo. 2008. Algunas características anatómicas y tecnológicas de la madera de 24 especies de <italic>Quercus</italic> (encinos) de México. Madera y Bosques 14(3):43-80. Doi: https://doi.org/10.21829/myb.2008.1431206. </mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Pérez-Olvera</surname>
							<given-names>C. P.</given-names>
						</name>
						<name>
							<surname>Dávalos-Sotelo</surname>
							<given-names>R.</given-names>
						</name>
					</person-group>
					<year>2008</year>
					<article-title>Algunas características anatómicas y tecnológicas de la madera de 24 especies de Quercus (encinos) de México</article-title>
					<source>Madera y Bosques</source>
					<volume>14</volume>
					<issue>3</issue>
					<fpage>43</fpage>
					<lpage>80</lpage>
					<pub-id pub-id-type="doi">10.21829/myb.2008.1431206</pub-id>
				</element-citation>
			</ref>
			<ref id="B42">
				<mixed-citation>Pérez-Olvera, C., R. Dávalos-Sotelo, R. Limón G. y P. A. Quintanar I. 2015. Características tecnológicas de la madera de dos especies de Quercus de Durango, México. Madera y Bosques 21(3):19-46. <comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_arttext&amp;pid=S1405-04712015000300002&amp;lng=es&amp;nrm=iso&gt;">http://www.scielo.org.mx/scielo.php?script=sci_arttext&amp;pid=S1405-04712015000300002&amp;lng=es&amp;nrm=iso&gt;</ext-link>
					</comment>. ISSN 2448-7597 (15 de julio de 2021).</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Pérez-Olvera</surname>
							<given-names>C.</given-names>
						</name>
						<name>
							<surname>Dávalos-Sotelo</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Limón G.</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Quintanar I.</surname>
							<given-names>P. A.</given-names>
						</name>
					</person-group>
					<year>2015</year>
					<article-title>Características tecnológicas de la madera de dos especies de Quercus de Durango, México</article-title>
					<source>Madera y Bosques</source>
					<volume>21</volume>
					<issue>3</issue>
					<fpage>19</fpage>
					<lpage>46</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_arttext&amp;pid=S1405-04712015000300002&amp;lng=es&amp;nrm=iso&gt;">http://www.scielo.org.mx/scielo.php?script=sci_arttext&amp;pid=S1405-04712015000300002&amp;lng=es&amp;nrm=iso&gt;</ext-link>
					</comment>
					<issn>2448-7597</issn>
					<date-in-citation content-type="access-date" iso-8601-date="2021-07-15">15 de julio de 2021</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B43">
				<mixed-citation>Panshin, A. J. y C. de Zeeuw. 1980. Textbook of Wood Technology. Structure, identification, properties, and uses of the United States and Canada. McGraw-Hill, New York, NY, USA. 722 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Panshin</surname>
							<given-names>A. J.</given-names>
						</name>
						<name>
							<surname>de Zeeuw</surname>
							<given-names>C.</given-names>
						</name>
					</person-group>
					<year>1980</year>
					<source>Textbook of Wood Technology. Structure, identification, properties, and uses of the United States and Canada</source>
					<publisher-name>McGraw-Hill</publisher-name>
					<publisher-loc>New York, NY, USA</publisher-loc>
					<fpage>722</fpage>
					<lpage>722</lpage>
				</element-citation>
			</ref>
			<ref id="B44">
				<mixed-citation>Pettersen R., C. 1984. The Chemical Composition of Wood. <italic>In</italic>: Rowell, R. (ed). The Chemistry of Solid Wood. American Chemical Society. Washington, DC, USA. pp. 57-126. Doi: https://doi.org/10.1021/ba-1984-0207.ch002.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Pettersen R.</surname>
							<given-names>C.</given-names>
						</name>
					</person-group>
					<year>1984</year>
					<chapter-title>The Chemical Composition of Wood</chapter-title>
					<person-group person-group-type="editor">
						<name>
							<surname>Rowell</surname>
							<given-names>R.</given-names>
						</name>
					</person-group>
					<source>Chemistry of Solid Wood</source>
					<publisher-name>American Chemical Society</publisher-name>
					<publisher-loc>Washington, DC, USA</publisher-loc>
					<fpage>57</fpage>
					<lpage>126</lpage>
					<pub-id pub-id-type="doi">10.1021/ba-1984-0207.ch002</pub-id>
				</element-citation>
			</ref>
			<ref id="B45">
				<mixed-citation>Quezada F., A. 1998. Acondicionamiento y manutención de sierras huinchas. Manual No. 22. Instituto Forestal Chile. Santiago, Chile. 106 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Quezada F.</surname>
							<given-names>A.</given-names>
						</name>
					</person-group>
					<year>1998</year>
					<source>Acondicionamiento y manutención de sierras huinchas</source>
					<issue>22</issue>
					<publisher-name>Instituto Forestal Chile</publisher-name>
					<publisher-loc>Santiago, Chile</publisher-loc>
					<fpage>106</fpage>
					<lpage>106</lpage>
				</element-citation>
			</ref>
			<ref id="B46">
				<mixed-citation>Quintanar O., J. 2005. Construcción y operación de un secador solar para madera. INIFAP. CIRCE. Puebla, México. Folleto Técnico No. 2. 46 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<year>2005</year>
					<source>Construcción y operación de un secador solar para madera</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRCE</publisher-name>
					<publisher-loc>Puebla, México</publisher-loc>
					<issue>2</issue>
					<fpage>46</fpage>
					<lpage>46</lpage>
				</element-citation>
			</ref>
			<ref id="B47">
				<mixed-citation>Quintanar O., J., M. E. Fuentes L. y R. Flores V. R. 2009a. Manual para el secado en estufa de madera de encinos de Oaxaca.. INIFAP. CIRGOC. Puebla, México. Folleto Técnico No. 50. 70 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Flores V. R.</surname>
							<given-names>R.</given-names>
						</name>
					</person-group>
					<year>2009</year>
					<source>Manual para el secado en estufa de madera de encinos de Oaxaca</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRGOC</publisher-name>
					<publisher-loc>Puebla, México</publisher-loc>
					<issue>50</issue>
					<fpage>70</fpage>
					<lpage>70</lpage>
				</element-citation>
			</ref>
			<ref id="B48">
				<mixed-citation>Quintanar O., J., M. E. Fuentes L. y R. Flores V. 2009b. Planeación e instalación de estufas para secado de madera. INIFAP. CIRGOC. Puebla, México. Folleto Técnico No. 48. 48 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
					</person-group>
					<year>2009</year>
					<source>Planeación e instalación de estufas para secado de madera</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRGOC</publisher-name>
					<publisher-loc>Puebla, México</publisher-loc>
					<issue>48</issue>
					<fpage>48</fpage>
					<lpage>48</lpage>
				</element-citation>
			</ref>
			<ref id="B49">
				<mixed-citation>Quintanar O., J., M. E. Fuentes L. y J. C. Tamarit U. 2011. Evaluación económica de un secador solar para madera. Revista Mexicana de Ciencias Forestales 2(7): 97-104. Doi: https://doi.org/10.29298/rmcf.v2i7.561.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Tamarit U.</surname>
							<given-names>J. C.</given-names>
						</name>
					</person-group>
					<year>2011</year>
					<article-title>Evaluación económica de un secador solar para madera</article-title>
					<source>Revista Mexicana de Ciencias Forestales</source>
					<volume>2</volume>
					<issue>7</issue>
					<fpage>97</fpage>
					<lpage>104</lpage>
					<pub-id pub-id-type="doi">10.29298/rmcf.v2i7.561</pub-id>
				</element-citation>
			</ref>
			<ref id="B50">
				<mixed-citation>Quintanar O., J., M. E. Fuentes L. y R. Flores V. 2012. Protocolo de mejora continua para incrementar la calidad en el estufado de la madera. Revista Mexicana de Ciencias Forestales 3(13): 87-93. Doi: https://doi.org/10.29298/rmcf.v3i13.491.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Fuentes L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
					</person-group>
					<year>2012</year>
					<article-title>Protocolo de mejora continua para incrementar la calidad en el estufado de la madera</article-title>
					<source>Revista Mexicana de Ciencias Forestales</source>
					<volume>3</volume>
					<issue>13</issue>
					<fpage>87</fpage>
					<lpage>93</lpage>
					<pub-id pub-id-type="doi">10.29298/rmcf.v3i13.491</pub-id>
				</element-citation>
			</ref>
			<ref id="B51">
				<mixed-citation>Quintanar O., J. 2017. Secado solar: metodología para el diseño y evaluación de un secador solar tipo invernadero utilizado en el secado de madera. Revista de Aplicación Científica y Técnica 3(9): 18-23. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://ecorfan.org/spain/researchjournals/Aplicacion_Cientifica_y_Tecnica/vol3num9/Revista_de_Aplicacion_Cientifica_y_Tecnica_V3_N9_3.pdf">https://ecorfan.org/spain/researchjournals/Aplicacion_Cientifica_y_Tecnica/vol3num9/Revista_de_Aplicacion_Cientifica_y_Tecnica_V3_N9_3.pdf</ext-link>
					</comment> (15 de octubre de 2020).</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Quintanar O.</surname>
							<given-names>J.</given-names>
						</name>
					</person-group>
					<year>2017</year>
					<article-title>Secado solar: metodología para el diseño y evaluación de un secador solar tipo invernadero utilizado en el secado de madera</article-title>
					<source>Revista de Aplicación Científica y Técnica</source>
					<volume>3</volume>
					<issue>9</issue>
					<fpage>18</fpage>
					<lpage>23</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://ecorfan.org/spain/researchjournals/Aplicacion_Cientifica_y_Tecnica/vol3num9/Revista_de_Aplicacion_Cientifica_y_Tecnica_V3_N9_3.pdf">https://ecorfan.org/spain/researchjournals/Aplicacion_Cientifica_y_Tecnica/vol3num9/Revista_de_Aplicacion_Cientifica_y_Tecnica_V3_N9_3.pdf</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2020-10-15">15 de octubre de 2020</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B52">
				<mixed-citation>Rosales C., M., J. A. Honorato S., A. B. Santos G., M. E. Pérez L., G. Colotl H. y V. Sánchez M. 2016. Composición química de las hojas y ramas de <italic>Cedrela odorata</italic> L. de dos plantaciones forestales como fuente de materia prima lignocelulósica. Madera y Bosques 22(2): 131-146. Doi:https://doi.org/10.21829/myb.2016.2221330.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Rosales C.</surname>
							<given-names>M.</given-names>
						</name>
						<name>
							<surname>Honorato S.</surname>
							<given-names>J. A.</given-names>
						</name>
						<name>
							<surname>Santos G.</surname>
							<given-names>A. B.</given-names>
						</name>
						<name>
							<surname>Pérez L.</surname>
							<given-names>M. E.</given-names>
						</name>
						<name>
							<surname>Colotl H.</surname>
							<given-names>G.</given-names>
						</name>
						<name>
							<surname>Sánchez M.</surname>
							<given-names>V.</given-names>
						</name>
					</person-group>
					<year>2016</year>
					<article-title>Composición química de las hojas y ramas de Cedrela odorata L. de dos plantaciones forestales como fuente de materia prima lignocelulósica</article-title>
					<source>Madera y Bosques</source>
					<volume>22</volume>
					<issue>2</issue>
					<fpage>131</fpage>
					<lpage>146</lpage>
					<pub-id pub-id-type="doi">10.21829/myb.2016.2221330</pub-id>
				</element-citation>
			</ref>
			<ref id="B53">
				<mixed-citation>Sandvik. 1964. Manual sobre hojas de sierra cinta ancha para madera. Sandvik Steel. Sandviken, Suecia. 63 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<collab>Sandvik</collab>
					</person-group>
					<year>1964</year>
					<source>Manual sobre hojas de sierra cinta ancha para madera</source>
					<publisher-name>Sandvik Steel</publisher-name>
					<publisher-loc>Sandviken, Suecia</publisher-loc>
					<fpage>63</fpage>
					<lpage>63</lpage>
				</element-citation>
			</ref>
			<ref id="B54">
				<mixed-citation>Santacruz G., N. y A. Espejel R. 2004. Los encinos (<italic>Quercus</italic>) de Tlaxcala, México. Ed. Universidad Autónoma de Tlaxcala. Tlaxcala, Tlax., México. 41 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Santacruz G.</surname>
							<given-names>N.</given-names>
						</name>
						<name>
							<surname>Espejel R.</surname>
							<given-names>A.</given-names>
						</name>
					</person-group>
					<year>2004</year>
					<source>Los encinos (Quercus) de Tlaxcala, México</source>
					<publisher-name>Universidad Autónoma de Tlaxcala</publisher-name>
					<publisher-loc>Tlaxcala, Tlax., México</publisher-loc>
					<fpage>41</fpage>
					<lpage>41</lpage>
				</element-citation>
			</ref>
			<ref id="B55">
				<mixed-citation>Schrewe, H. 1983. Manual de acondicionamiento y mantenimiento de la sierra cinta. FAO. Lima, Perú. 92 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Schrewe</surname>
							<given-names>H.</given-names>
						</name>
					</person-group>
					<year>1983</year>
					<source>Manual de acondicionamiento y mantenimiento de la sierra cinta</source>
					<publisher-name>FAO</publisher-name>
					<publisher-loc>Lima, Perú</publisher-loc>
					<fpage>92</fpage>
					<lpage>92</lpage>
				</element-citation>
			</ref>
			<ref id="B56">
				<mixed-citation>Simpson, W. T. 1991. Dry Kiln Operator’s Manual. United States Department of Agriculture Forest Service. Forest Products Laboratory. Agriculture handbook No. 188. Madison, WI: U.S. Department of Agriculture Forest Service. 274 p. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://www.fpl.fs.fed.us/documnts/usda/ah188/ah188.htm">https://www.fpl.fs.fed.us/documnts/usda/ah188/ah188.htm</ext-link>
					</comment> (26 de julio de 2021).</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Simpson</surname>
							<given-names>W. T.</given-names>
						</name>
					</person-group>
					<year>1991</year>
					<source>Dry Kiln Operator’s Manual</source>
					<publisher-name>United States Department of Agriculture Forest Service</publisher-name>
					<publisher-name>Forest Products Laboratory</publisher-name>
					<issue>188</issue>
					<publisher-loc>Madison, WI</publisher-loc>
					<publisher-name>U.S. Department of Agriculture Forest Service</publisher-name>
					<fpage>274</fpage>
					<lpage>274</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://www.fpl.fs.fed.us/documnts/usda/ah188/ah188.htm">https://www.fpl.fs.fed.us/documnts/usda/ah188/ah188.htm</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2021-07-26">26 de julio de 2021</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B57">
				<mixed-citation>Sotomayor C., J. R. 2005. Características mecánicas y clasificación de la madera de 150 especies mexicanas. Investigación e Ingeniería de la Madera. Sociedad Mexicana de Ciencia y Tecnología de la Madera. Morelia, Michoacán. México. 24 p. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://www.researchgate.net/publication/260752809_Caracteristicas_mecanicas_y_clasificacion_de_150_especies_de_maderas_Mexicanas">https://www.researchgate.net/publication/260752809_Caracteristicas_mecanicas_y_clasificacion_de_150_especies_de_maderas_Mexicanas</ext-link>
					</comment> (4 de agosto de 2021)</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Sotomayor C.</surname>
							<given-names>J. R.</given-names>
						</name>
					</person-group>
					<year>2005</year>
					<source>Características mecánicas y clasificación de la madera de 150 especies mexicanas</source>
					<publisher-name>Investigación e Ingeniería de la Madera</publisher-name>
					<publisher-name>Sociedad Mexicana de Ciencia y Tecnología de la Madera</publisher-name>
					<publisher-loc>Morelia, Michoacán. México</publisher-loc>
					<fpage>24</fpage>
					<lpage>24</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://www.researchgate.net/publication/260752809_Caracteristicas_mecanicas_y_clasificacion_de_150_especies_de_maderas_Mexicanas">https://www.researchgate.net/publication/260752809_Caracteristicas_mecanicas_y_clasificacion_de_150_especies_de_maderas_Mexicanas</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2021-08-04">4 de agosto de 2021</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B58">
				<mixed-citation>Tamarit U., J. C. y J. L. López T. 2007. Xilotecnología de los principales árboles tropicales de México. Libro Técnico No.3. INIFAP.CIRGOC. Puebla, Pue., México. 264 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Tamarit U.</surname>
							<given-names>J. C.</given-names>
						</name>
						<name>
							<surname>López T.</surname>
							<given-names>J. L.</given-names>
						</name>
					</person-group>
					<year>2007</year>
					<source>Xilotecnología de los principales árboles tropicales de México</source>
					<issue>3</issue>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRGOC</publisher-name>
					<publisher-loc>Puebla, Pue., México</publisher-loc>
					<fpage>264</fpage>
					<lpage>264</lpage>
				</element-citation>
			</ref>
			<ref id="B59">
				<mixed-citation>Tamarit U., J. C. y R. Flores V. 2012. El proceso de cepillado de maderas duras. INIFAP. CIRGOC. Puebla, México. Folleto técnico No. 75. 21 p.</mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Tamarit U.</surname>
							<given-names>J. C.</given-names>
						</name>
						<name>
							<surname>Flores V.</surname>
							<given-names>R.</given-names>
						</name>
					</person-group>
					<year>2012</year>
					<source>El proceso de cepillado de maderas duras</source>
					<publisher-name>INIFAP</publisher-name>
					<publisher-name>CIRGOC</publisher-name>
					<publisher-loc>Puebla, México</publisher-loc>
					<issue>75</issue>
					<fpage>21</fpage>
					<lpage>21</lpage>
				</element-citation>
			</ref>
			<ref id="B60">
				<mixed-citation>Teischinger, A. 2010. The development of wood technology and technology developments in the wood industries from history to future. European Journal of Wood and Wood Products 68(3): 281-287. Doi:https://doi.org/10.1007/s00107-010-0458-2.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Teischinger</surname>
							<given-names>A.</given-names>
						</name>
					</person-group>
					<year>2010</year>
					<article-title>The development of wood technology and technology developments in the wood industries from history to future</article-title>
					<source>European Journal of Wood and Wood Products</source>
					<volume>68</volume>
					<issue>3</issue>
					<fpage>281</fpage>
					<lpage>287</lpage>
					<pub-id pub-id-type="doi">10.1007/s00107-010-0458-2</pub-id>
				</element-citation>
			</ref>
			<ref id="B61">
				<mixed-citation>Thibaut, B., L. Denaud, R. Collet, R. Marchal, J. Beauchêne, F. Mothe, P. Méausoone, P. Martin, P. Larricq and F. Eyma. 2016. Wood machining with a focus on French research in the last 50 years. Annals of Forest Science 73(1): 163-184. Doi: https://doi.org/10.1007/s13595-015-0460-2.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Thibaut</surname>
							<given-names>B.</given-names>
						</name>
						<name>
							<surname>Denaud</surname>
							<given-names>L.</given-names>
						</name>
						<name>
							<surname>Collet</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Marchal</surname>
							<given-names>R.</given-names>
						</name>
						<name>
							<surname>Beauchêne</surname>
							<given-names>J.</given-names>
						</name>
						<name>
							<surname>Mothe</surname>
							<given-names>F.</given-names>
						</name>
						<name>
							<surname>Méausoone</surname>
							<given-names>P.</given-names>
						</name>
						<name>
							<surname>Martin</surname>
							<given-names>P.</given-names>
						</name>
						<name>
							<surname>Larricq</surname>
							<given-names>P.</given-names>
						</name>
						<name>
							<surname>Eyma</surname>
							<given-names>F.</given-names>
						</name>
					</person-group>
					<year>2016</year>
					<article-title>Wood machining with a focus on French research in the last 50 years</article-title>
					<source>Annals of Forest Science</source>
					<volume>73</volume>
					<issue>1</issue>
					<fpage>163</fpage>
					<lpage>184</lpage>
					<pub-id pub-id-type="doi">10.1007/s13595-015-0460-2</pub-id>
				</element-citation>
			</ref>
			<ref id="B62">
				<mixed-citation>Vignote P., S. e I. Martínez R. 2006. Tecnología de la madera. 3ª. Ed. Madrid. Ediciones Mundi-Prensa. Artes Gráficas Cuesta. Madrid, España. 678 p. </mixed-citation>
				<element-citation publication-type="book">
					<person-group person-group-type="author">
						<name>
							<surname>Vignote P.</surname>
							<given-names>S.</given-names>
						</name>
						<name>
							<surname>Martínez R.</surname>
							<given-names>I.</given-names>
						</name>
					</person-group>
					<year>2006</year>
					<source>Tecnología de la madera</source>
					<edition>3ª</edition>
					<publisher-loc>Madrid</publisher-loc>
					<publisher-name>Ediciones Mundi-Prensa</publisher-name>
					<publisher-name>Artes Gráficas Cuesta</publisher-name>
					<fpage>678</fpage>
					<lpage>678</lpage>
				</element-citation>
			</ref>
			<ref id="B63">
				<mixed-citation>Zavala Z., D. 2000. Secado de maderas tropicales en estufas convencionales. Madera y Bosques 6(1): 41-54. Doi: https://doi.org/10.21829/myb.2000.611341 </mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Zavala Z.</surname>
							<given-names>D.</given-names>
						</name>
					</person-group>
					<year>2000</year>
					<article-title>Secado de maderas tropicales en estufas convencionales</article-title>
					<source>Madera y Bosques</source>
					<volume>6</volume>
					<issue>1</issue>
					<fpage>41</fpage>
					<lpage>54</lpage>
					<pub-id pub-id-type="doi">10.21829/myb.2000.611341</pub-id>
				</element-citation>
			</ref>
			<ref id="B64">
				<mixed-citation>Zavala Z., D. y M. Vázquez R. 2001. Determinación de las características de maquinado de la madera de 34 especies tropicales. Revista Chapingo Serie Ciencias Forestales y del Ambiente 7(2): 169-183. <comment>
						<ext-link ext-link-type="uri" xlink:href="https://revistas.chapingo.mx/forestales/revista/articulos/viewer.html?file=rchscfaVII361.pdf">https://revistas.chapingo.mx/forestales/revista/articulos/viewer.html?file=rchscfaVII361.pdf</ext-link>
					</comment> (11 de enero de 2021). </mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Zavala Z.</surname>
							<given-names>D.</given-names>
						</name>
						<name>
							<surname>Vázquez R.</surname>
							<given-names>M.</given-names>
						</name>
					</person-group>
					<year>2001</year>
					<article-title>Determinación de las características de maquinado de la madera de 34 especies tropicales</article-title>
					<source>Revista Chapingo Serie Ciencias Forestales y del Ambiente</source>
					<volume>7</volume>
					<issue>2</issue>
					<fpage>169</fpage>
					<lpage>183</lpage>
					<comment>
						<ext-link ext-link-type="uri" xlink:href="https://revistas.chapingo.mx/forestales/revista/articulos/viewer.html?file=rchscfaVII361.pdf">https://revistas.chapingo.mx/forestales/revista/articulos/viewer.html?file=rchscfaVII361.pdf</ext-link>
					</comment>
					<date-in-citation content-type="access-date" iso-8601-date="2021-01-11">11 de enero de 2021</date-in-citation>
				</element-citation>
			</ref>
			<ref id="B65">
				<mixed-citation>Zavala Z., D. 2003. Efecto del sistema de aserrío tradicional en las características de la madera de encinos. Madera y bosques 9(2): 29-39 Doi:https://doi.org/10.21829/myb.2003.921284.</mixed-citation>
				<element-citation publication-type="journal">
					<person-group person-group-type="author">
						<name>
							<surname>Zavala Z.</surname>
							<given-names>D.</given-names>
						</name>
					</person-group>
					<year>2003</year>
					<article-title>Efecto del sistema de aserrío tradicional en las características de la madera de encinos</article-title>
					<source>Madera y bosques</source>
					<volume>9</volume>
					<issue>2</issue>
					<fpage>29</fpage>
					<lpage>39</lpage>
					<pub-id pub-id-type="doi">10.21829/myb.2003.921284</pub-id>
				</element-citation>
			</ref>
		</ref-list>
	</back>
	<sub-article article-type="translation" id="s1" xml:lang="en">
		<front-stub>
			<article-categories>
				<subj-group subj-group-type="heading">
					<subject>Review article</subject>
				</subj-group>
			</article-categories>
			<title-group>
				<article-title>Research contributions of INIFAP on wood technology and its industrialization processes</article-title>
			</title-group>
			<author-notes>
				<fn fn-type="conflict" id="fn3">
					<label>Conflict of interests</label>
					<p> The authors declare that they have no conflict of interests.</p>
				</fn>
				<fn fn-type="conflict" id="fn4">
					<label>Contribution by author</label>
					<p> Juan Carlos Tamarit-Urías and Martha Elena Fuentes-López: conceptualization and organization of the research, data collection, and synthesis of documentary information; Patricia Aguilar-Sánchez and Rogelio Flores-Velázquez: contribution of bibliographic material and review of the document. All the authors participated in data analysis, as well as in the drafting and editing of the document.</p>
				</fn>
			</author-notes>
			<abstract>
				<title>Abstract</title>
				<p>The technological characterization of the wood of forest species in Mexico is essential to determine its optimal potential use and, thereby, achieve successful transformation and industrialization processes. Within this context, the <italic>Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP)</italic> (National Institute for Research in Forests, Agriculture and Livestock) (INIFAP), through strategic lines of research in science and technology of wood and forest industries and products, has generated scientific knowledge that contributes to improving production systems and processes in the forest products industry within the framework of sustainable development. A compilation and synthesis of the most important results drawn from relevant works in basic and applied research carried out by INIFAP during the years 1986 to 2020 is presented herein. The topics addressed in the sphere of wood technology are physics, mechanics and chemistry of wood, while in terms of industrialization processes, aspects of sawing, drying and machining of wood are developed. Due to the abundance of taxa whose wood is commonly classified as difficult to use, such as the group of oaks and others known as common tropical, emphasis has been placed on the description and use of this type of species for temperate and tropical regions of Mexico. Also presented herein are research perspectives and challenges in wood technology, forest industries and products.</p>
			</abstract>
			<kwd-group xml:lang="en">
				<title>Key words:</title>
				<kwd>Wood quality</kwd>
				<kwd>technological characterization</kwd>
				<kwd>industry and forest products</kwd>
				<kwd>primary transformation processes</kwd>
				<kwd>uses of wood</kwd>
				<kwd>xylotechnology</kwd>
			</kwd-group>
		</front-stub>
		<body>
			<sec sec-type="intro">
				<title>Introduction</title>
				<p>Mexico has 64.9 million hectares of forests and tropical forests, ecosystems where 46 species of the <italic>Pinus</italic> genus (pine), around 150 species of <italic>Quercus</italic> (oak) and more than 62 tropical timber taxa of several genera coexist; together, these taxa make up 47.7 % of the national forest area. The timber production in 2017 was 8.5 million m<sup>3</sup> roundwood; pine contributed 70.87 %; common tropical species 13.39 % and oaks 9.84 % (<xref ref-type="bibr" rid="B11">Conafor, 2019</xref>).</p>
				<p>The economic, social, and environmental potential represented by timber species leads to the generation of technological knowledge for the forest industry, which contributes to their better utilization, as well as to the achievement of successful transformation and industrialization processes. The correct use of wood requires a normalized knowledge with international standards for its attributes that may allow inferring its behavior in the transformation processes and in the different treatments required for the conditions of use to which it will be exposed.</p>
				<p>The <italic>Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP)</italic> (National Institute for Research in Forests, Agriculture and Livestock) (INIFAP) has conducted research on wood technology, industries and forest products; it has also contributed to the knowledge and use of wood through xylotechnological characterization, based on research lines such as macro and microscopic anatomy, natural durability, preservation of hardwoods and softwoods, among others. However, this document only shows the main contributions derived from research related to the physical, mechanical and chemical aspects of wood, as well as to the primary transformation processes of sawmilling, drying and machining, with emphasis on taxa belonging to the group of commercially important conifers such as <italic>Pinus</italic>, broadleaved species of the <italic>Quercus</italic> genus, and some tropical species classified as hardwoods.</p>
				<p>In order to integrate the most relevant research results on the topics of wood technology and forest industries mentioned above, a thorough and exhaustive documentary review of the official publications available in the INIFAP Series was carried out. Scientific literature was also consulted in the form of articles published by researchers of this institution. In order to outline a basic theoretical and discussion framework for each topic, specialized scientific literature was reviewed, and so were the technical standards for specific characterizations. To a lesser extent, publications of scientific personnel from outside the Institution were incorporated and used for contrast, reference and complementarity of the information provided.</p>
				<p>Based upon the fundamental premise that the ultimate goal of wood technology will always be to provide scientific-technical elements for the forest industry to generate products that satisfy and solve society's needs, it is expected that with INIFAP's contributions in this area it will be possible to envision research perspectives with topics and lines of research that will constitute an updated priority and strategic agenda favoring innovation, growth and development; this will contribute to render Mexico's forest industry more efficient and competitive within the framework of sustainable development.</p>
				<sec>
					<title>Wood physics and mechanics </title>
					<p>The physical and mechanical properties of wood are the most important in determining its use as solid wood. These attributes serve as quality indexes to determine the most convenient use; they also influence the dimensional behavior of the wood in its transversal, tangential and radial planes in the face of climatic conditions that may cause undesirable effects. The strength of the wood is severely affected by moisture content and direction of loading, relative to the longitudinal plane. In the longitudinal direction, the bending strength is directly proportional to the density of the wood. The longitudinal cells are structures that provide stiffness and strength, since they receive the loads directly. The most studied physical properties are basic density (Bd), moisture content (MC), shrinkage, anisotropy ratio and fiber saturation point (FSP) (Kollman, 1959).</p>
					<p>The physical properties of the wood of certain taxa of the <italic>Quercus</italic> genus have been determined in the states of <italic>Puebla, Guanajuato</italic> and <italic>Oaxaca</italic> (<xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes, 2001</xref>). Oaks are a taxonomic group with a wide distribution; they abound in Mexico and have a high productive potential. However, they are used for low value-added products. They are characterized by using the methods indicated in the American Standard ASTM D143 (<xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes, 2001</xref>). The physical properties of the following nine species of oak have been studied: <italic>Quercus affinis</italic> Scheidw, <italic>Q. glabrescens</italic> Benth., <italic>Q. crassifolia</italic> Bonpl., <italic>Q. mexicana</italic> Bonpl., <italic>Q. laurina</italic> Humb. &amp; Bonpl., <italic>Q. obtusata</italic> Humb. &amp; Bonpl., <italic>Q. rugosa</italic> Née., <italic>Q. durifolia</italic> Seemen ex Loes., and <italic>Q. castanea</italic> Née., whose timbers were classified as high density, and whose values ranged from 0.62 to 0.84 g cm<sup>-3</sup> (<xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes, 2001</xref>).</p>
					<p>Basic density is the most widely used indicator to determine and infer other properties of wood: performance and quality. Variation in the density of wood occurs between and within species and increases from the pith to the bark; it is the result of cell wall thickness, fiber diameter, number and size of vessels and chemical composition. In those with a high density, the contraction and expansion increases by moisture content. Wood becomes stronger as its increases in density, which is assessed from the level of moisture content at which its mass and volume are measured (<xref ref-type="bibr" rid="B43">Panshin and De Zeeuw, 1980</xref>).</p>
					<p>Total radial shrinkage has been determined in the 4.3-5.52 range %; total tangential shrinkage, between 12.6-16.6 %; while total volumetric shrinkage is 16.21 to 19.0 % (<xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes, 2001</xref>). These values suggest high and very high dimensional changes, as well as a high anisotropy ratio, leading to a high propensity to deformation (cracking and splitting) and a lower dimensional stability. Large differences in shrinkage values between the radial and tangential planes can cause defects during drying, which are accentuated when the moisture content is below the Fiber Saturation Point (FSP) (<xref ref-type="bibr" rid="B35">Kollmann, 1959</xref>; <xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>).</p>
					<p>The FSP represents the turning point at which important changes in physical and mechanical properties occur. At INIFAP, moisture content percentages ranging from 25 to 35 % have been obtained. The anisotropy varies between 2.5 and 3.4 %, records that are related to abundant uniseriate and polyseriate rays (<xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes, 2001</xref>). These values are within the range established for angiosperm species with a distinct heartwood (<xref ref-type="bibr" rid="B36">Kollmann and Coté, 1968</xref>).</p>
					<p>Mechanical properties define the behavior, aptitude and capacity of wood to resist external forces in its different planes; they have a proportional dependence upon density and moisture. Stiffness and mechanical strength are important in applications for structural purposes and in the dimensioning of different parts to evaluate their deformation and determine their resistance.</p>
					<p>Static bending refers to the resistance of wood to loads; thus, when it is used as a beam (loads transverse to its longitudinal axis), deformations and compressive, shear and tensile stresses are produced (<xref ref-type="bibr" rid="B17">Honorato and Fuentes, 2001</xref>). The compression parallel to the grain corresponds to the resistance of wood to loads, when used as a column. The wood has its lowest tensile strength perpendicularly to the grain, and the highest (10 - 20 times higher), in the direction parallel to the grain; in the transverse direction there is a separation of the fibers, and in the longitudinal direction, breakage of the fibers (<xref ref-type="bibr" rid="B62">Vignote and Martínez, 2006</xref>).</p>
					<p>Tensile strength is also density-dependent; in this respect, spring wood (which is lighter) is one-sixth as strong as summer wood. Shear strength is often reduced by knots or cracks in the wood and is equivalent to 10-15 % of the parallel tensile strength (<xref ref-type="bibr" rid="B62">Vignote and Martínez, 2006</xref>).</p>
					<p>The values of the mechanical properties of oak wood were estimated in green condition, at 12 % moisture content (<xref ref-type="table" rid="t4">Tables 1</xref> and <xref ref-type="table" rid="t5">2</xref>) (<xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes, 2001</xref>), based on the American Standard ASTM D143 (<xref ref-type="bibr" rid="B2">ASTM, 1992</xref>) and the <xref ref-type="bibr" rid="B4">French Standard AFN NFB51-009 (1985)</xref> for evaluating impact resistance. Static bending and compression parallel to the grain with stress at the proportional limit, modulus of rupture, modulus of elasticity, work at the proportional limit, and work at maximum load were also determined, as well as compression perpendicular to the grain, perpendicular tension, shear stress, cracking, hardness, and impact. Consistently, the values obtained at 12 % moisture were higher than those determined in green condition (<xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes 2001</xref>).</p>
					<p>
						<table-wrap id="t4">
							<label>Table 1</label>
							<caption>
								<title>Mechanical properties of the wood of species of the genus <italic>Quercus</italic>.</title>
							</caption>
							<table style="border-collapse: collapse; width: 100%">
								<colgroup>
									<col/>
									<col/>
									<col span="3"/>
									<col span="3"/>
									<col/>
									<col span="3"/>
								</colgroup>
								<thead>
									<tr>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" rowspan="2">Species</th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="left" rowspan="2">MC</th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="3">Static flexion <break/>(kg cm<sup>-2</sup>) </th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="3">Axial compression <break/>(kg cm<sup>-2</sup>) </th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center">CPG</th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="3">Impact </th>
									</tr>
									<tr>
										<th  style="border-bottom: solid thin; " align="center">SLP</th>
										<th  style="border-bottom: solid thin; " align="center">MOR</th>
										<th  style="border-bottom: solid thin; " align="center">MOE</th>
										<th  style="border-bottom: solid thin; " align="center">SLP</th>
										<th  style="border-bottom: solid thin; " align="center">MOR</th>
										<th  style="border-bottom: solid thin; " align="center">MOE</th>
										<th  style="border-bottom: solid thin; " align="center">SLP</th>
										<th  style="border-bottom: solid thin; " align="center">W</th>
										<th  style="border-bottom: solid thin; " align="center">K</th>
										<th  style="border-bottom: solid thin; " align="center">R</th>
									</tr>
								</thead>
								<tbody>
									<tr>
										<td align="left" rowspan="2"  style="border-bottom: solid thin;"><italic>Q</italic>. <italic>affinis</italic> Scheidw</td>
										<td align="center">Green</td>
										<td align="center">471</td>
										<td align="center">667</td>
										<td align="center">117</td>
										<td align="center">323</td>
										<td align="center">332</td>
										<td align="center">76</td>
										<td align="center">73</td>
										<td align="center">3.2</td>
										<td align="center">0.48</td>
										<td align="center">159</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="center">12%</td>
										<td  style="border-bottom: solid thin;" align="center">1 110</td>
										<td  style="border-bottom: solid thin;" align="center">2 133</td>
										<td  style="border-bottom: solid thin;" align="center">251</td>
										<td  style="border-bottom: solid thin;" align="center">540</td>
										<td  style="border-bottom: solid thin;" align="center">621</td>
										<td  style="border-bottom: solid thin;" align="center">113</td>
										<td  style="border-bottom: solid thin;" align="center">153</td>
										<td  style="border-bottom: solid thin;" align="center">6.3</td>
										<td  style="border-bottom: solid thin;" align="center">0.81</td>
										<td  style="border-bottom: solid thin;" align="center">279</td>
									</tr>
									<tr>
										<td align="left" rowspan="2"  style="border-bottom: solid thin;"><italic>Q</italic>. <italic>glabrescens</italic> Benth.</td>
										<td align="center">Green</td>
										<td align="center">508</td>
										<td align="center">732</td>
										<td align="center">123</td>
										<td align="center">356</td>
										<td align="center">370</td>
										<td align="center">84</td>
										<td align="center">78</td>
										<td align="center">4.4</td>
										<td align="center">0.62</td>
										<td align="center">176</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="center">12%</td>
										<td  style="border-bottom: solid thin;" align="center">984</td>
										<td  style="border-bottom: solid thin;" align="center">1 384</td>
										<td  style="border-bottom: solid thin;" align="center">195</td>
										<td  style="border-bottom: solid thin;" align="center">568</td>
										<td  style="border-bottom: solid thin;" align="center">650</td>
										<td  style="border-bottom: solid thin;" align="center">124</td>
										<td  style="border-bottom: solid thin;" align="center">132</td>
										<td  style="border-bottom: solid thin;" align="center">5.3</td>
										<td  style="border-bottom: solid thin;" align="center">0.69</td>
										<td  style="border-bottom: solid thin;" align="center">260</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="left" rowspan="2"><italic>Q</italic>. <italic>crassifolia</italic> Bonpl.</td>
										<td align="center">Green</td>
										<td align="center">471</td>
										<td align="center">692</td>
										<td align="center">112</td>
										<td align="center">335</td>
										<td align="center">357</td>
										<td align="center">86</td>
										<td align="center">90</td>
										<td align="center">3.2</td>
										<td align="center">0.49</td>
										<td align="center">155</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="center">12%</td>
										<td  style="border-bottom: solid thin;" align="center">1 006</td>
										<td  style="border-bottom: solid thin;" align="center">1 410</td>
										<td  style="border-bottom: solid thin;" align="center">190</td>
										<td  style="border-bottom: solid thin;" align="center">598</td>
										<td  style="border-bottom: solid thin;" align="center">678</td>
										<td  style="border-bottom: solid thin;" align="center">140</td>
										<td  style="border-bottom: solid thin;" align="center">144</td>
										<td  style="border-bottom: solid thin;" align="center">4.6</td>
										<td  style="border-bottom: solid thin;" align="center">0.60</td>
										<td  style="border-bottom: solid thin;" align="center">243</td>
									</tr>
									<tr>
										<td align="left" rowspan="2"  style="border-bottom: solid thin;"><italic>Q</italic>. <italic>mexicana</italic> Bonpl.</td>
										<td align="center">Green</td>
										<td align="center">446</td>
										<td align="center">687</td>
										<td align="center">104</td>
										<td align="center">292</td>
										<td align="center">313</td>
										<td align="center">71</td>
										<td align="center">84</td>
										<td align="center">3.1</td>
										<td align="center">0.45</td>
										<td align="center">146</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="center">12%</td>
										<td  style="border-bottom: solid thin;" align="center">736</td>
										<td  style="border-bottom: solid thin;" align="center">1 155</td>
										<td  style="border-bottom: solid thin;" align="center">163</td>
										<td  style="border-bottom: solid thin;" align="center">484</td>
										<td  style="border-bottom: solid thin;" align="center">535</td>
										<td  style="border-bottom: solid thin;" align="center">91</td>
										<td  style="border-bottom: solid thin;" align="center">96</td>
										<td  style="border-bottom: solid thin;" align="center">3.6</td>
										<td  style="border-bottom: solid thin;" align="center">0.59</td>
										<td align="center"  style="border-bottom: solid thin;">215</td>
									</tr>
									<tr>
										<td align="left" rowspan="2"  style="border-bottom: solid thin;"><italic>Q</italic>. <italic>laurina</italic> Humb. &amp; Bonpl.</td>
										<td align="center">Green</td>
										<td align="center">486</td>
										<td align="center">723</td>
										<td align="center">115</td>
										<td align="center">340</td>
										<td align="center">350</td>
										<td align="center">77</td>
										<td align="center">86</td>
										<td align="center">3.7</td>
										<td align="center">0.45</td>
										<td align="center">159</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="center">12%</td>
										<td  style="border-bottom: solid thin;" align="center">1 024</td>
										<td  style="border-bottom: solid thin;" align="center">1 845</td>
										<td  style="border-bottom: solid thin;" align="center">182</td>
										<td  style="border-bottom: solid thin;" align="center">435</td>
										<td  style="border-bottom: solid thin; " align="center">496</td>
										<td  style="border-bottom: solid thin;" align="center">86</td>
										<td  style="border-bottom: solid thin;" align="center">153</td>
										<td  style="border-bottom: solid thin;" align="center">4.0</td>
										<td  style="border-bottom: solid thin;" align="center">0.51</td>
										<td  style="border-bottom: solid thin;" align="center">190</td>
									</tr>
									<tr>
										<td align="left" rowspan="2"  style="border-bottom: solid thin;"><italic>Q</italic>. <italic>obtusata</italic> Humb. &amp; Bonpl.</td>
										<td align="center">Green</td>
										<td align="center">459</td>
										<td align="center">681</td>
										<td align="center">263</td>
										<td align="center">295</td>
										<td align="center">331</td>
										<td align="center">348</td>
										<td align="center">81</td>
										<td align="center">4.0</td>
										<td align="center">0.28</td>
										<td align="center">209</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="center">12%</td>
										<td  style="border-bottom: solid thin;" align="center">750</td>
										<td  style="border-bottom: solid thin;" align="center">1 108</td>
										<td  style="border-bottom: solid thin;" align="center">434</td>
										<td  style="border-bottom: solid thin;" align="center">499</td>
										<td  style="border-bottom: solid thin;" align="center">590</td>
										<td  style="border-bottom: solid thin;" align="center">328</td>
										<td  style="border-bottom: solid thin;" align="center">190</td>
										<td  style="border-bottom: solid thin;" align="center">5.6</td>
										<td  style="border-bottom: solid thin;" align="center">0.32</td>
										<td  style="border-bottom: solid thin;" align="center">224</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="left" rowspan="2"><italic>Q</italic>. <italic>rugosa</italic> Née</td>
										<td align="center">Green</td>
										<td align="center">376</td>
										<td align="center">625</td>
										<td align="center">210</td>
										<td align="center">239</td>
										<td align="center">289</td>
										<td align="center">213</td>
										<td align="center">67</td>
										<td align="center">4.4</td>
										<td align="center">0.29</td>
										<td align="center">172</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="center">12%</td>
										<td  style="border-bottom: solid thin;" align="center">711</td>
										<td  style="border-bottom: solid thin;" align="center">1 194</td>
										<td  style="border-bottom: solid thin;" align="center">364</td>
										<td  style="border-bottom: solid thin;" align="center">423</td>
										<td  style="border-bottom: solid thin;" align="center">558</td>
										<td  style="border-bottom: solid thin;" align="center">259</td>
										<td  style="border-bottom: solid thin;" align="center">172</td>
										<td  style="border-bottom: solid thin;" align="center">5.1</td>
										<td  style="border-bottom: solid thin;" align="center">0.32</td>
										<td  style="border-bottom: solid thin;" align="center">210</td>
									</tr>
									<tr>
										<td align="left" rowspan="2"  style="border-bottom: solid thin;"><italic>Q. durifolia</italic> Seemen ex Loes.</td>
										<td align="center">Green</td>
										<td align="center">398</td>
										<td align="center">608</td>
										<td align="center">235</td>
										<td align="center">230</td>
										<td align="center">276</td>
										<td align="center">229</td>
										<td align="center">85</td>
										<td align="center">3.5</td>
										<td align="center">0.28</td>
										<td align="center">188</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="center">12%</td>
										<td  style="border-bottom: solid thin;" align="center">662</td>
										<td  style="border-bottom: solid thin;" align="center">1 022</td>
										<td  style="border-bottom: solid thin;" align="center">298</td>
										<td  style="border-bottom: solid thin;" align="center">439</td>
										<td  style="border-bottom: solid thin;" align="center">539</td>
										<td  style="border-bottom: solid thin;" align="center">331</td>
										<td  style="border-bottom: solid thin;" align="center">140</td>
										<td  style="border-bottom: solid thin;" align="center">3.4</td>
										<td  style="border-bottom: solid thin;" align="center">0.30</td>
										<td  style="border-bottom: solid thin;" align="center">190</td>
									</tr>
									<tr>
										<td align="left" rowspan="2"  style="border-bottom: solid thin;"><italic>Q</italic>. <italic>castanea</italic> Née</td>
										<td align="center">Green</td>
										<td align="center">545</td>
										<td align="center">767</td>
										<td align="center">309</td>
										<td align="center">257</td>
										<td align="center">313</td>
										<td align="center">240</td>
										<td align="center">85</td>
										<td align="center">3.1</td>
										<td align="center">0.31</td>
										<td align="center">187</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="center">12%</td>
										<td  style="border-bottom: solid thin;" align="center">885</td>
										<td  style="border-bottom: solid thin;" align="center">1 256</td>
										<td  style="border-bottom: solid thin;" align="center">377</td>
										<td  style="border-bottom: solid thin;" align="center">539</td>
										<td  style="border-bottom: solid thin;" align="center">628</td>
										<td  style="border-bottom: solid thin;" align="center">425</td>
										<td align="center">148</td>
										<td  style="border-bottom: solid thin;" align="center">4.8</td>
										<td  style="border-bottom: solid thin;" align="center">0.32</td>
										<td  style="border-bottom: solid thin;" align="center">200</td>
									</tr>
								</tbody>
							</table>
							<table-wrap-foot>
								<fn id="TFN6">
									<p>Source: <xref ref-type="bibr" rid="B23">Fuentes and Flores (1995)</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes (2001)</xref>.</p>
								</fn>
								<fn id="TFN7">
									<p>MC = Moisture conteSnt; SLP = stress at the limit of proportionality; MOR = Modulus of rupture; MOE = Modulus of elasticity (kg cm<sup>-2</sup> × 1000); CPG = Compression perpendicular to the grain; W = Breakage work (KJ m<sup>-2</sup>); K = Coefficient of resilience; R = Instant reaction to breakage (kg).</p>
								</fn>
							</table-wrap-foot>
						</table-wrap>
					</p>
					<p>
						<table-wrap id="t5">
							<label>Table 2</label>
							<caption>
								<title>Other mechanical properties of the wood of species of the genus <italic>Quercus</italic>.</title>
							</caption>
							<table style="border-collapse: collapse; width: 100%">
								<colgroup>
									<col/>
									<col span="2"/>
									<col span="2"/>
									<col span="3"/>
									<col span="3"/>
									<col/>
								</colgroup>
								<thead>
									<tr>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" rowspan="2">Species</th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">Hardness <break/>PEG (kg)</th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">Janka <break/>PAG (kg)</th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">Cutting <break/>force MS (kg cm<sup>-2</sup>) </th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">Cracked <break/>MS (kg cm<sup>-2</sup>) </th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center" colspan="2">PS MS <break/>(kg cm<sup>-2</sup>)</th>
									</tr>
									<tr>
										<th  style="border-bottom: solid thin; " align="center">Green</th>
										<th  style="border-bottom: solid thin; " align="center">12%</th>
										<th  style="border-bottom: solid thin; " align="center">Green</th>
										<th  style="border-bottom: solid thin; " align="center">12%</th>
										<th  style="border-bottom: solid thin; " align="center">Green</th>
										<th  style="border-bottom: solid thin; " align="center">12%</th>
										<th  style="border-bottom: solid thin; " align="center">Green</th>
										<th  style="border-bottom: solid thin; " align="center">12%</th>
										<th  style="border-bottom: solid thin; " align="center">Green</th>
										<th  style="border-bottom: solid thin; " align="center">12%</th>
									</tr>
								</thead>
								<tbody>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>affinis</italic> Scheidw</td>
										<td align="center">575</td>
										<td align="center">1 011</td>
										<td align="center">583</td>
										<td align="center">1 180</td>
										<td align="center">115</td>
										<td align="center">175</td>
										<td align="center">78</td>
										<td align="center">89</td>
										<td align="center">65</td>
										<td align="center">82</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>glabrescens</italic> Benth.</td>
										<td align="center">730</td>
										<td align="center">908</td>
										<td align="center">696</td>
										<td align="center">1 042</td>
										<td align="center">120</td>
										<td align="center">152</td>
										<td align="center">73</td>
										<td align="center">93</td>
										<td align="center">66</td>
										<td align="center">67</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>crassifolia</italic> Bonpl.</td>
										<td align="center">612</td>
										<td align="center">838</td>
										<td align="center">665</td>
										<td align="center">1 169</td>
										<td align="center">114</td>
										<td align="center">143</td>
										<td align="center">95</td>
										<td align="center">111</td>
										<td align="center">65</td>
										<td align="center">67</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>mexicana</italic> Bonpl.</td>
										<td align="center">510</td>
										<td align="center">594</td>
										<td align="center">523</td>
										<td align="center">1 001</td>
										<td align="center">103</td>
										<td align="center">133</td>
										<td align="center">88</td>
										<td align="center">97</td>
										<td align="center">63</td>
										<td align="center">64</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>laurina</italic> Humb. &amp; Bonpl.</td>
										<td align="center">648</td>
										<td align="center">821</td>
										<td align="center">646</td>
										<td align="center">1 094</td>
										<td align="center">122</td>
										<td align="center">145</td>
										<td align="center">97</td>
										<td align="center">116</td>
										<td align="center">64</td>
										<td align="center">71</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>obtusata</italic> Humb. &amp; Bonpl.</td>
										<td align="center">792</td>
										<td align="center">1 320</td>
										<td align="center">799</td>
										<td align="center">1 443</td>
										<td align="center">109</td>
										<td align="center">208</td>
										<td align="center">93</td>
										<td align="center">99</td>
										<td align="center">66</td>
										<td align="center">66</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>rugosa</italic> Née</td>
										<td align="center">733</td>
										<td align="center">1 234</td>
										<td align="center">752</td>
										<td align="center">1 361</td>
										<td align="center">114</td>
										<td align="center">192</td>
										<td align="center">72</td>
										<td align="center">95</td>
										<td align="center">46</td>
										<td align="center">57</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>durifolia</italic> Seemen ex Loes.</td>
										<td align="center">658</td>
										<td align="center">904</td>
										<td align="center">674</td>
										<td align="center">1 099</td>
										<td align="center">121</td>
										<td align="center">184</td>
										<td align="center">85</td>
										<td align="center">112</td>
										<td align="center">62</td>
										<td align="center">68</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="left"><italic>Q</italic>. <italic>castanea</italic> Née</td>
										<td  style="border-bottom: solid thin;" align="center">632</td>
										<td  style="border-bottom: solid thin;" align="center">1 002</td>
										<td  style="border-bottom: solid thin;" align="center">692</td>
										<td  style="border-bottom: solid thin;" align="center">1 203</td>
										<td  style="border-bottom: solid thin;" align="center">117</td>
										<td  style="border-bottom: solid thin;" align="center">199</td>
										<td  style="border-bottom: solid thin;" align="center">80</td>
										<td  style="border-bottom: solid thin;" align="center">131</td>
										<td  style="border-bottom: solid thin;" align="center">49</td>
										<td  style="border-bottom: solid thin;" align="center">85</td>
									</tr>
								</tbody>
							</table>
							<table-wrap-foot>
								<fn id="TFN8">
									<p>Source: <xref ref-type="bibr" rid="B23">Fuentes and Flores (1995)</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes (2001)</xref>.</p>
								</fn>
								<fn id="TFN9">
									<p>PEG = Perpendicular to the grain; PAG = Parallel to the grain; MS = Maximum stress; PS = Perpendicular stress; Green = Green MC.</p>
								</fn>
							</table-wrap-foot>
						</table-wrap>
					</p>
					<p>Wood has its minimum mechanical resistance in green condition and improves significantly by drying; thus, the compressive and bending strength doubles when its moisture content is 12 and 15 %. In green condition, the species analyzed and classified according to <xref ref-type="bibr" rid="B12">Dávalos and Bárcenas (1998)</xref>, <xref ref-type="bibr" rid="B13">Dávalos and Bárcenas (1999)</xref> and <xref ref-type="bibr" rid="B57">Sotomayor (2005)</xref> were located in a medium level of unitary resistance to breakage in static bending, axial compression and elasticity stresses. The species were classified as woods of high and very high lateral and transverse hardness; with a moisture content of 12 % (a value used internationally for comparison purposes).</p>
					<p>As the wood dries below the FSP, the cell walls become harder and stiffer; consequently, there is an increase in all its mechanical properties, except for tenacity. Unit resistances at break in static bending were classified as high and very high, and elasticity, as high to very high (<xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes 2001</xref>), which is evidence that they are very rigid woods that tend to deform very little. The modulus of elasticity in the longitudinal direction can be up to 100 times greater than in the perpendicular direction; and in the radial direction, the modulus of elasticity is twice as great as in the tangential direction. Unitary axial compression resistances were medium, while perpendicular compressive strengths were classified as high (<xref ref-type="bibr" rid="B23">Fuentes and Flores, 1995</xref>; <xref ref-type="bibr" rid="B17">Honorato and Fuentes 2001</xref>).</p>
					<p>The working values at maximum load showed good damping capacity and high resilience; they exhibited their highest impact resistance in the tangential plane rather than in the radial plane, which indicates that they are woods with a high tenacity, whose fibers are difficult to separate.</p>
					<p>Based on the results of the physical and mechanical characterization combined with the information from studies on the anatomy of wood (<xref ref-type="bibr" rid="B41">Pérez-Olvera, y Dávalos-Sotelo, 2008</xref>; <xref ref-type="bibr" rid="B23">Fuentes y Flores, 1995</xref>; <xref ref-type="bibr" rid="B30">Honorato y Fuentes 2001</xref>), it was deduced that the analyzed woods are suitable for use in the manufacture of value-added products such as construction structures, industrial flooring, sporting goods, as well as in handicrafts and furniture, due to their aesthetic characteristics, different shades of color, pronounced grain, coarse texture and annular porosity, which provide attractive tangential cut surfaces that are of great relevance in joinery and veneer.</p>
					<p>The straight grain of <italic>Quercus</italic> species determines the ease with which their wood can be worked in the production of turned, carved and carved articles (<xref ref-type="bibr" rid="B42">Pérez-Olvera <italic>et al</italic>., 2015</xref>); in addition, it is used in cooperage, railroad ties, and charcoal; the latter, from residues generated in the sawmill industry in the form of branches, tips, stumps, shrubby taxa with sinuous growth, bark, trimmings, strips, and sawdust. The most important characteristic that defines the quality and quantity of flask formed during combustion is the amount of fixed carbon (greater than 70 %), linked to other properties and characteristics of oak trees such as high density, low ash content (3-6 %), volatile materials (15 %), and calorific value between 30-33 MJ kg<sup>-1</sup> 
 <bold>―</bold>values that represent important sources of energy (<xref ref-type="bibr" rid="B8">Bautista-Vargas <italic>et al.</italic>, 2017</xref>; <xref ref-type="bibr" rid="B15">De la Cruz <italic>et al.</italic>, 2020</xref>).</p>
				</sec>
				<sec>
					<title>Chemical characterization of wood</title>
					<p>It is important to know the chemical composition of wood, which varies within the same species according to the part of the tree: root, stem, or branch; the type of wood: normal, tension, or compression; the geographical location, climate, and soil conditions (<xref ref-type="bibr" rid="B44">Pettersen, 1984</xref>). Research conducted at INIFAP has determined that the content of chemical compounds may be slightly higher in the branches than in the wood of the main trunk at a height of 1.30 m (Honorato and Hernández, 1998). The cell wall of softwoods and hardwoods is mainly composed of cellulose, hemicellulose and lignin; their percentage contents range from 35 to 50 %, 10-35 % and 15-40 %, respectively (<xref ref-type="bibr" rid="B9">Chen, 2014</xref>).</p>
					<p>The determination of cellulose, lignin and hemicellulose is essential to infer the application of wood in various industrial processes such as pulp for paper, tannins, energy, organic preservatives, boards, plastics, among others (<xref ref-type="bibr" rid="B7">Bautista and Honorato, 2005</xref>; <xref ref-type="bibr" rid="B58">Tamarit and López, 2007</xref>). The success of industries that consume large amounts of wood depends on the knowledge of its chemical composition (<xref ref-type="bibr" rid="B26">Honorato, 2002</xref>).</p>
					<p>The diversity of the chemical compounds present in the cell wall, as well as in its structure, render them difficult, in certain species, to obtain, extract, purify and separate. This means that, in addition to applying classical analytical chemistry processes, modified methods and processes are used.</p>
					<p>In Mexico, the chemical composition of wood is determined according to TAPPI (Technical Association of the Pulp and Paper Industry) and ASTM standards, which are adjusted according to the condition of the harvested material (sapwood, heartwood, bark, or blends) (<xref ref-type="bibr" rid="B7">Bautista and Honorato, 2005</xref>). For the quantitative evaluation of the chemical components, an additive analysis is performed, in which the sum of all components must be 100 % (<xref ref-type="bibr" rid="B58">Tamarit and López, 2007</xref>).</p>
					<p>In species of the <italic>Pinus</italic> genus it has been estimated that the percentages of major chemical components vary from 43.9 to 45.6 % for cellulose; between 23.4 and 24.4 % for hemicellulose; between 66.7 and 70.0 % for holocellulose, and from 26.3 to 28.6 % for lignin (<xref ref-type="bibr" rid="B27">Honorato <italic>et al</italic>., 2016</xref>). The analysis of secondary components (extracts) was carried out with ethanol in percentages of 1.02 to 1.28 %, and of 3.5 to 12 % for ethanol-benzene soluble components. The ash content rate was 0.25 to 0.3 % (<xref ref-type="bibr" rid="B27">Honorato <italic>et al</italic>., 2016</xref>).</p>
					<p>Mexican oak wood has been underutilized in the form of firewood and charcoal, due to misinformation and lack of knowledge of adequate techniques and procedures for higher-value uses (Honorato and Hernández, 1998; <xref ref-type="bibr" rid="B54">Santacruz and Espejel, 2004</xref>). The determinations of its main chemical compounds show that the cellulose content is 37 to 56 %; the hemicellulose content is 22-30 %, and the lignin content is 18-22 %. The pentosans were quantified in the proportion of 18-23 % (Honorato, 1998; <xref ref-type="bibr" rid="B26">Honorato, 2002</xref>; <xref ref-type="bibr" rid="B5">Bárcenas <italic>et al</italic>., 2008</xref>).</p>
					<p>The content of oak extractives has been little studied due to the difficulty to purify and isolate substances. However, it has been determined that the importance of these compounds lies in the influence they exert on other properties, characteristics and treatments of wood. High concentrations of extractives and low pH values in wood have a negative effect on finishing processes and adhesive application (Honorato and Hernández, 1998, <xref ref-type="bibr" rid="B26">Honorato, 2002</xref>).</p>
					<p>Soluble extractives in wood and bark have been made with solvents such as ethanol-benzene and 1 % sodium hydroxide (NaOH), in addition to the use of hot water. With the latter applied to bark, the content of extractives varied between 10.92 and 21.25 % in proportion to the total weight of the wood sample; when wood was used, the values ranged from 4.61 to 10.0 %. The contents of ethanol-benzene soluble components in the two types of materials were 5-13.23 % and 1.14-5.24 %, respectively. When using a 1 % NaOH solution on the bark, concentrations ranged from 31 to 44.90 % and for wood from 20.89-26 % of the total extractives present. The tannin content in oak bark corresponded to the range of 5.48-54.04 %, and in oak wood, from 0.59-33.44 % (<xref ref-type="bibr" rid="B29">Honorato <italic>et al</italic>., 2015</xref>; <xref ref-type="bibr" rid="B52">Rosales <italic>et al</italic>., 2016</xref>; <xref ref-type="bibr" rid="B1">Apolinar <italic>et al</italic>., 2017</xref>).</p>
					<p>The chemical composition of the wood of the following tropical species has also been studied: <italic>Ceiba pentandra</italic> (L.) Gaertn. (kapok tree), <italic>Hevea brasiliensis</italic> (Willd. ex A.Juss.) Müll. Arg. (rubber tree), <italic>Ochroma pyramidale</italic> (Cav. ex Lam.) Urb. (balsa tree), <italic>Cedrela odorata</italic> L. (Spanish cedar), <italic>Inga spuria</italic> Humb. &amp; Bonpl. ex Willd. (guama), <italic>Juglans pyriformis</italic> Liebm. (walnut tree), <italic>Acacia pennatula</italic> (Schltdl. &amp; Cham) Benth. (sweet acacia), and <italic>Trema micrantha</italic> (L.) Blume (capulin) (<xref ref-type="fig" rid="f4">Figure 1</xref>). The purpose of that research was to infer their possible applications as pulp for paper, and in the production of resins and adhesives, vanillin, carbohydrates, bioplastics, phenols, and flavonoids, among others, as well as to determine their energetic potential for fuel uses, measured through the calorific value, which ranges between 17.76 and 18.54 MJ kg<sup>-1</sup> (<xref ref-type="bibr" rid="B26">Honorato, 2002</xref>; <xref ref-type="bibr" rid="B29">Honorato <italic>et al.</italic>, 2015</xref>; <xref ref-type="bibr" rid="B52">Rosales <italic>et al.</italic>, 2016</xref>; <xref ref-type="bibr" rid="B1">Apolinar <italic>et al.</italic>, 2017</xref>).</p>
					<p>
						<fig id="f4">
							<label>Figure 1</label>
							<caption>
								<title>Chemical composition of the wood of tropical species.</title>
							</caption>
							<graphic xlink:href="https://cienciasforestales.inifap.gob.mx/index.php/forestales/es/article/download/1086/version/955/3167/19039/2007-1132-remcf-12-s1-177-gf4.gif"/>
							<attrib>Source: Honorato <italic>et al</italic>. (2015); <xref ref-type="bibr" rid="B52">Rosales <italic>et al</italic>. (2016)</xref>; <xref ref-type="bibr" rid="B1">Apolinar <italic>et al</italic>. (2017)</xref>.</attrib>
						</fig>
					</p>
					<p>The chemical composition of the studied taxa makes evident specific behaviors in different processes; thus, species with high alpha-cellulose and hemicellulose content, such as <italic>Ceiba pentandra</italic>, <italic>Hevea brasiliensis</italic>, and <italic>Ochroma pyramidale</italic>, are ideal for pulping and carbohydrate bioconversion processes.</p>
					<p>Extracts are soluble in different solvents (alcohol-benzene, acetone, ethanol, cold water, hot water, among others) and can be classified into volatile acids, essential oils, resinous acids and polyphenols. Extracts are modifiers of physical properties, affecting the density and equilibrium moisture content of the wood and, consequently, indirectly modifying various mechanical properties. They also influence the durability, color, odor and flavor of the wood. Phenolic extracts provide resistance to rot and insect attack (<xref ref-type="bibr" rid="B14">Darmawan <italic>et al</italic>., 2011</xref>).</p>
					<p>Species like <italic>Ceiba pentandra</italic> and the leaves of <italic>Cedrela odorata</italic> are rich in extractives; this indicates some degree of affectation in the sawing, drying, pulping, machining, gluing, and wood finishing processes (<xref ref-type="bibr" rid="B27">Honorato <italic>et al.</italic>, 2016</xref>). The most important inorganic contents (ashes) in the sawing and workability processes are crystals and silica, which have an impact on the increased wear of the cutting edge of the cutting elements; hence, the importance of the fact that <italic>Acacia pennatula</italic> (Schltdl. &amp; Cham.) Benth and <italic>Ceiba pentandra</italic> have high ash contents, of 1.44 % and 1.59 %, respectively (<xref ref-type="bibr" rid="B27">Honorato <italic>et al.</italic>, 2016</xref>).</p>
					<p>Lignin, rich in carbon and hydrogen, affects pulping and bioconversion processes and is mainly used in the production of polyurethane. The amount of lignin and extractables is closely related to the calorific value. Therefore, the species studied and shown in <xref ref-type="fig" rid="f4">Figure 1</xref> can be used for wood energy purposes in the industrial, domestic and residential sectors, although <italic>Acacia pennatula</italic> and <italic>Ceiba pentandra</italic> have high ash contents that influence their use as biofuels (<xref ref-type="bibr" rid="B27">Honorato <italic>et al.</italic>, 2016</xref>).</p>
					<p>The chemical composition is responsible for the behavior in the different wood transformation processes; therefore, it is relevant to determine the main chemical components of the different taxa, and based on them, to define the specific industrial uses that guarantee the optimal and integral use of wood.</p>
				</sec>
				<sec>
					<title>Sawmilling</title>
					<p>Mexico is characterized by an underdeveloped industrial forest sector, with high production costs, obsolete technologies installed in low to medium-capacity production units, poorly trained personnel and the use of unsorted roundwood at high prices. In the band sawing or band sawmilling process, density and hardness combined with a low moisture content and the presence of mineral fouling in the wood are determining factors in the stresses to which the saw is subjected during cutting; they cause blunting, cracks or fissures and can lead to tooth fracture. With the adoption of adequate sawing parameters such as tooth angles (<xref ref-type="fig" rid="f5">Figure 2</xref>), tooth pitch, throat depth, cutting width, among others, it is possible to obtain a good sawing quality, which is evaluated based on the uniformity in the thickness of the boards produced.</p>
					<p>
						<fig id="f5">
							<label>Figure 2</label>
							<caption>
								<title>Bandsaw tooth geometry.</title>
							</caption>
							<graphic xlink:href="https://cienciasforestales.inifap.gob.mx/index.php/forestales/es/article/download/1086/version/955/3167/19043/2007-1132-remcf-12-s1-177-gf5.jpg"/>
							<attrib>α= cleaning angle or free angle; β= tooth angle; γ= cutting angle or angle of attack; σ= front angle (γ + 90˚).</attrib>
						</fig>
					</p>
					<p>The most important part of the saw blades are the teeth, because they are the cutting elements. There are six major issues that impact on the potential benefits of band sawing: tooth symmetry, tooth maintenance, blade center cracks, saw blade twist, flywheel profile wear, and saw blade wear and tear; in addition to the ratio of speed and depth of cut, depending on the feed capacity of the groove (<xref ref-type="bibr" rid="B65">Zavala, 2003</xref>; <xref ref-type="bibr" rid="B39">Martínez <italic>et al</italic>., 2006</xref>).</p>
					<p>With regard to sawmilling, INIFAP has conducted research on the competitiveness of the lumber industry, marketing channels, industry analysis, pine and oak wood cutting variation, among others. The determinations on the characteristics that band saws must meet to process oak wood stand out, among which the tooth geometry shown in <xref ref-type="fig" rid="f5">Figure 2</xref> (tooth pitch, gullet depth, lateral clearance, cutting angle, tooth angle and free angle) is relevant to increase wear resistance and increase yield, since a greater volume of wood is sawn with a good cutting quality (<xref ref-type="bibr" rid="B33">Kirbach, 1982</xref>; <xref ref-type="bibr" rid="B65">Zavala, 2003</xref>; <xref ref-type="bibr" rid="B39">Martínez <italic>et al</italic>., 2006</xref>).</p>
					<p>The tooth pitch determines the amount of work a saw can do; for hard and very hard woods <xref ref-type="bibr" rid="B53">Sandvik (1964)</xref> indicated that the optimal tooth pitch spacing should be 1.25 to 2.75&quot;. <xref ref-type="bibr" rid="B55">Schrewe (1983)</xref> noted that the spacing is also related to the width and caliber of the saw, in addition to the diameter of the flywheels. Tooth pitch must be less on saws 3&quot; to 6&quot; wide, 18 to 19&quot; gauge and 4 to 6 ft. diameter flywheels.; whereas, a larger tooth pitch is suitable for 12 to 16&quot; wide saws, with 12 to 13&quot; gauge and 8 to 10 ft diameter flywheels (<xref ref-type="bibr" rid="B38">Lunstrum, 1985</xref>).</p>
					<p>For sawing oak wood, <xref ref-type="bibr" rid="B20">Flores <italic>et al</italic>. (2007a)</xref> recommend a tooth pitch of 1 to 2¼&quot; (25.4 to 57.15 mm) based on the gauge of the saw, the thinner the saw, the smaller the tooth pitch (<xref ref-type="fig" rid="f5">Figure 2</xref>). <xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>. (2001)</xref> record that the tooth pitch for 8&quot; wide saws is 1.5&quot;; Martínez <italic>et al</italic>. (2006) document that for 5&quot; wide saws the best result is obtained with a tooth pitch of 1.25&quot;.</p>
					<p>The function of the gullet in the band saw is to accommodate the sawdust during sawing and, subsequently, to throw it out of the cut. Several studies agree that the appropriate gullet depth for hardwoods with undercut teeth is 1/3 of the tooth pitch (<xref ref-type="bibr" rid="B53">Sandvik, 1964</xref>; <xref ref-type="bibr" rid="B55">Schrewe, 1983</xref>), or close to 10 times the saw blade gauge (<xref ref-type="bibr" rid="B45">Quezada, 1998</xref>). When sawing oak with 8&quot; saws, Martínez <italic>et al.</italic> (2006) obtained the best results by using a throat depth of 0.5&quot;; <xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>. (2001)</xref> refer that with 5&quot; saws, the proper depth is 7/16&quot;.</p>
					<p>The way in which the cutting edge of the saw teeth acts depends on their angles (i.e., cutting, tooth, and cleaning angles), in relation to the density of the wood to be sawn, the direction of the cut to be made (longitudinal or transverse), and the type of saw. The cutting angle (angle of attack) for hardwoods that provides good results varies from 20 to 30º (<xref ref-type="bibr" rid="B53">Sandvik, 1964</xref>; <xref ref-type="bibr" rid="B55">Schrewe, 1983</xref>; <xref ref-type="bibr" rid="B45">Quezada, 1998</xref>); the most common cutting angles are 20 to 22º (<xref ref-type="bibr" rid="B38">Lunstrum, 1985</xref>). In North America, an angle of attack of 30º is used with satisfactory results in bandsaws with undercut teeth (<xref ref-type="bibr" rid="B34">Koch, 1964</xref>). In Mexico, when evaluating 8&quot; wide saws, the best results were obtained with an angle of attack of 25° (<xref ref-type="bibr" rid="B39">Martínez <italic>et al.</italic>, 2006</xref>); while acceptable results were achieved with 5&quot; saws by using a cutting angle of 25 and 30º (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
					<p>Regarding the tooth angle, it should not be too small to prevent the tooth tip from weakening and breaking under the effect of the cutting load, nor so large as to restrict the feed rate and cause higher power consumption. Martínez <italic>et al.</italic> (2006) indicate that an angle of 45° is ideal for sawing oak with 8&quot; wide saws; with 5&quot; wide saws, the tooth angle can be 44°, 50°, or 55° (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
					<p>The cleaning angle (<xref ref-type="fig" rid="f5">Figure 2</xref>) defines the free and clean cut of the saw, since the clearance between the saw and the wood must start right at the tip of the tooth in order to prevent the tooth spine from rubbing against the wood, which causes friction and overheating of the teeth. For sawing oak wood, a cleaning angle of 8 to 12° is recommended (<xref ref-type="bibr" rid="B38">Lunstrum, 1985</xref>). In North America, a 16° angle is used with wide band saw blades and angled teeth with good results. For 8&quot; wide saws, Martínez <italic>et al.</italic> (2006) determined that an angle of 20° gives good results; with 5&quot; saws, cleaning angles of 10, 15 and 16° were recommended (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
					<p>For each type of saw, there is a lateral clearance to obtain the appropriate cutting width, which varies depending on the geometry of the teeth, the moisture content, the cutting edge, the alignment of the equipment and the type of wood to be cut. Hardwoods require the side clearance to be 25 % greater than the saw gauge (<xref ref-type="bibr" rid="B38">Lunstrum, 1985</xref>). In Mexico, it was determined that for sawing oak wood, the lateral clearance corresponds to a range of 0.8 to 0.9 mm (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
					<p>From the difficulty of sawing <italic>Quercus</italic> wood, it is advisable to harden the cutting tip of the teeth, for which a coating can be applied with materials such as stellite 12, tungsten carbide, chromium platinum, vanadium, and high frequency hardening. This increases tooth wear resistance by up to 100 % when sawing softwoods, or by 12 times more for hardwoods. In the formation of the cutting tip of the tooth, some of the materials indicated are added, except when high frequency is used, in which case the steel of the saw is used (<xref ref-type="bibr" rid="B33">Kirbach and Bonac, 1982</xref>; <xref ref-type="bibr" rid="B32">Kirbach, 1984</xref>). The saw with teeth coated with stellite 12 has a higher resistance to blunting, which allows sawing a little more than twice the volume of oak wood, compared to the saw with angled teeth (<xref ref-type="bibr" rid="B17">Flores <italic>et al</italic>., 2001</xref>).</p>
				</sec>
				<sec>
					<title>Drying</title>
					<p>The process of removing the water contained inside the wood to the point where it is in hygroscopic equilibrium with the environment in which it will be used is known as drying. It is optimal when the wood dries in a short time, at the lowest cost and with the best quality. It is a necessary process for the timber industry that is rarely carried out in Mexico, partly because consumers are reluctant to pay the premium price. About 80 % of wood production is marketed freshly sawn or air-dried, in which case the wood only reaches moisture values in equilibrium with the environment (<xref ref-type="bibr" rid="B25">Fuentes <italic>et al</italic>., 2008</xref>); in order to obtain lower moisture contents, it is necessary to turn to artificial drying with conventional drying ovens (<xref ref-type="bibr" rid="B31">JUNAC, 1989</xref>).</p>
					<p>The artificial or conventional drying of the wood of broadleaf trees such as oak, tropical species or eucalyptus requires considering the heterogeneity of their anatomical and physical characteristics.</p>
					<p>According to <xref ref-type="bibr" rid="B63">Zavala (2000)</xref>, hardwoods have numerous, large and wide radius elements with weaker intercellular bonds, which favors the appearance of cracks and deformations during drying as temperature, relative humidity, and air speed change to drier conditions. These hardwoods exhibit high and uneven shrinkages that favor excessive internal stresses; and therefore, the severity of defects is greater, contrary to what occurs with the drying of softwoods. One way to minimize defects such as cracks, splits, deformations, grooving and collapse in oak wood is through slow drying and sometimes pre-drying (<xref ref-type="bibr" rid="B63">Zavala, 2000</xref>).</p>
					<p>Woods with a high content of tyloses are difficult to dry, since the water flow is obstructed by reducing the vessel diameter, making them impermeable, and therefore they need longer drying time. Tyloses are common in the heartwood of many angiosperms and in the wood vessels of temperate species such as oaks (<xref ref-type="bibr" rid="B36">Kollmann and Coté, 1968</xref>); high basic density and a high MC induce long drying time.</p>
					<p>INIFAP has developed conventional kiln drying programs with temperatures below 100 °C for hardwood and coniferous species (<xref ref-type="bibr" rid="B24">Fuentes <italic>et al.</italic>, 1997</xref>). In its generation, drying variables, anatomical characteristics (porosity, vessel distribution, grain orientation, cell contents, sapwood to heartwood ratio) and physical properties (moisture content, density, shrinkage, anisotropy, and fiber saturation point) were considered in order to obtain quality dry wood (<xref ref-type="bibr" rid="B24">Fuentes <italic>et al</italic>., 1997</xref>; <xref ref-type="bibr" rid="B63">Zavala, 2000</xref>).</p>
					<p>The problems of drying tropical woods in conventional kilns are also attributed to the difficulty to obtain large volumes of the same species and to the high costs involved in extracting small volumes. In this regard, it was determined that the best way to dry them is by forming groups of species with similar values of basic density, initial moisture content and board thickness (<xref ref-type="bibr" rid="B63">Zavala, 2000</xref>) (<xref ref-type="table" rid="t6">Table 3</xref>), which leads to a low defect intensity after drying.</p>
					<p>
						<table-wrap id="t6">
							<label>Table 3</label>
							<caption>
								<title>Drying programs for tropical and oak timber species.</title>
							</caption>
							<table style="border-collapse: collapse; width: 100%">
								<colgroup>
									<col/>
									<col/>
									<col/>
									<col/>
								</colgroup>
								<thead>
									<tr>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center">Species</th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center">Thickness <break/>(in)</th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center">Drying program</th>
										<th  style="border-bottom: solid thin; border-top: solid thin" align="center">Bd <break/>(g cm<sup>-3</sup>)</th>
									</tr>
								</thead>
								<tbody>
									<tr>
										<td align="left"><italic>Bombax ellipticum</italic> Kunth.</td>
										<td align="center">4/4</td>
										<td align="center">English H</td>
										<td align="center">0.44</td>
									</tr>
									<tr>
										<td align="left"><italic>Brosimum alicastrum</italic> Sw.</td>
										<td align="center">4/4</td>
										<td align="center">T7 B3</td>
										<td align="center">0.73</td>
									</tr>
									<tr>
										<td align="left"><italic>Bucida buceras</italic> (L.)</td>
										<td align="center">4/4</td>
										<td align="center">English C</td>
										<td align="center">0.85</td>
									</tr>
									<tr>
										<td align="left"><italic>Bursera simaruba</italic> (L.) Sarg.</td>
										<td align="center">4/4</td>
										<td align="center">English D</td>
										<td align="center">0.41</td>
									</tr>
									<tr>
										<td align="left"><italic>Calophyllum brasiliense</italic> Cambess</td>
										<td align="center">4/4</td>
										<td align="center">T3 D4</td>
										<td align="center">0.55</td>
									</tr>
									<tr>
										<td align="left"><italic>Cedrela odorata</italic> (L.)</td>
										<td align="center">4/4</td>
										<td align="center">English F</td>
										<td align="center">0.36</td>
									</tr>
									<tr>
										<td align="left"><italic>Cordia dodecandra</italic> A. DC.</td>
										<td align="center">6/4</td>
										<td align="center">English C</td>
										<td align="center">0.89</td>
									</tr>
									<tr>
										<td align="left"><italic>Cordia eleagnoides</italic> (Ruiz &amp; Pav.) Oken</td>
										<td align="center">6/4</td>
										<td align="center">English C</td>
										<td align="center">0.53</td>
									</tr>
									<tr>
										<td align="left"><italic>Enterolobium cyclocarpum</italic> (Jacq.)Griseb.</td>
										<td align="center">4/4</td>
										<td align="center">T8 F4</td>
										<td align="center">0.35</td>
									</tr>
									<tr>
										<td align="left"><italic>Lysiloma bahamensis</italic> Benth.</td>
										<td align="center">4/4</td>
										<td align="center">T3 C2</td>
										<td align="center">0.63</td>
									</tr>
									<tr>
										<td align="left"><italic>Lonchocarpus castilloi</italic> Standl.</td>
										<td align="center">6/4</td>
										<td align="center">English G</td>
										<td align="center">0.74</td>
									</tr>
									<tr>
										<td align="left"><italic>Manilkara zapota</italic> (L.) P. Royen</td>
										<td align="center">4/4</td>
										<td align="center">English R</td>
										<td align="center">0.90</td>
									</tr>
									<tr>
										<td align="left"><italic>Metopium brownei</italic> (Jacq.) Urb.</td>
										<td align="center">4/4</td>
										<td align="center">English C; T3 D3</td>
										<td align="center">0.89</td>
									</tr>
									<tr>
										<td align="left"><italic>Piscidia comunis</italic> (Blake) L. M. Jchnst.</td>
										<td align="center">4/4</td>
										<td align="center">English E</td>
										<td align="center">0.68</td>
									</tr>
									<tr>
										<td align="left"><italic>Platimiscium yucatanum</italic> Standl.</td>
										<td align="center">4/4</td>
										<td align="center">English C</td>
										<td align="center">0.67</td>
									</tr>
									<tr>
										<td align="left"><italic>Schizolobium parahybum</italic> (Vell.) Blake</td>
										<td align="center">4/4</td>
										<td align="center">T5 F4</td>
										<td align="center">0.30</td>
									</tr>
									<tr>
										<td align="left"><italic>Simarouba</italic> glauca DC.</td>
										<td align="center">4/4</td>
										<td align="center">English D; T9 A3</td>
										<td align="center">0.46</td>
									</tr>
									<tr>
										<td align="left"><italic>Swietenia macrophylla</italic> King.</td>
										<td align="center">4/4</td>
										<td align="center">T8 D5</td>
										<td align="center">0.42</td>
									</tr>
									<tr>
										<td align="left"><italic>Terminalia amazonia</italic> (J.F. Gmel.) Exell</td>
										<td align="center">3/4</td>
										<td align="center">T2 C3</td>
										<td align="center">0.66</td>
									</tr>
									<tr>
										<td align="left"><italic>Quercus</italic> sp</td>
										<td align="center">4/4</td>
										<td align="center">T4 D2</td>
										<td align="center">0.72</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>laurina</italic> Humb. &amp; Bonpl.</td>
										<td align="center">4/4</td>
										<td align="center">Special Modif I</td>
										<td align="center">0.73</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>crassifolia</italic> Bonpl.</td>
										<td align="center">4/4</td>
										<td align="center">Special Modif I</td>
										<td align="center">0.76</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>potosina</italic> Trel. Mem.</td>
										<td align="center">4/4</td>
										<td align="center">Special Modif I</td>
										<td align="center">0.76</td>
									</tr>
									<tr>
										<td align="left"><italic>Q</italic>. <italic>affinis</italic> Scheidw non M. Martens &amp; Galeotti</td>
										<td align="center">4/4</td>
										<td align="center">Special Modif I</td>
										<td align="center">0.74</td>
									</tr>
									<tr>
										<td  style="border-bottom: solid thin;" align="left"><italic>Q</italic>. <italic>falcata</italic> Michaux</td>
										<td  style="border-bottom: solid thin;" align="center">4/4</td>
										<td  style="border-bottom: solid thin;" align="center">T4 D2</td>
										<td  style="border-bottom: solid thin;" align="center">0.59</td>
									</tr>
								</tbody>
							</table>
							<table-wrap-foot>
								<fn id="TFN10">
									<p>In = inches; Bd = Basic density.</p>
								</fn>
							</table-wrap-foot>
						</table-wrap>
					</p>
					<p>
						<xref ref-type="bibr" rid="B63">Zavala (2000)</xref> developed two programs to dry a mix of 33 tropical taxa grouped by their basic density. The first program was defined for low and medium density species; the second, for high density species. The final results in both programs did not affect the quality of dry wood. Drying time for softwoods ranged from 5 to 7 days and from 10 to 25 days for high density woods. The author concluded that for optimal processing, the medium to low density woods require subdivision into two additional groups, and the high density woods, into four groups. <xref ref-type="table" rid="t6">Table 3</xref> includes some unpublished programs developed at INIFAP for different species, which are based on the parameters and variables described in <xref ref-type="bibr" rid="B31">JUNAC (1989)</xref> and in <xref ref-type="bibr" rid="B56">Simpson (1991)</xref>.</p>
					<p>Drying is a process that demands knowledge and attention; however, in <italic>ejido</italic> enterprises, it is generally carried out by staff with little training in the subject. In order to address the difficulties detected in small and medium-sized industries, <xref ref-type="bibr" rid="B47">Quintanar <italic>et al</italic>. (2009a</xref> and <xref ref-type="bibr" rid="B48">2009b</xref>) made a guide for operating a drying kiln and a kiln drying manual for oak wood, whose aim is to facilitate this process for kiln operators in rural communities. <xref ref-type="bibr" rid="B50">Quintanar <italic>et al</italic>. (2012)</xref> developed a continuous improvement protocol to increase the quality of kiln-dried wood, which is aimed at optimizing the human and material resources used during the process; the protocol is based on three basic criteria: stacking of wood, operation of the kiln, and application of the drying schedule.</p>
					<p>The solar lumber drying method has also been investigated at INIFAP. This is an intermediate process between conventional kiln drying and open air drying, in which solar energy is used as a heat source (<xref ref-type="bibr" rid="B24">Fuentes <italic>et al.</italic>, 1997</xref>). It has been determined that the success of solar dryers is restricted to areas with high solar radiation, which favors drying during summer and early autumn (<xref ref-type="bibr" rid="B31">JUNAC, 1989</xref>). Fuel scarcity and high fuel costs stimulate the industry's interest in looking to solar energy as an alternative source for drying hardwoods, which consume 60 to 70 % of the total energy used in the process (<xref ref-type="bibr" rid="B10">Chen, 1981</xref>).</p>
					<p>Comparing solar drying, conventional kiln drying and open-air drying methods, <xref ref-type="bibr" rid="B24">Fuentes <italic>et al.</italic> (1997)</xref> point out that drying oak wood in a solar dryer has greater advantages, because it does not require great investment and operating costs, as when conventional kilns are used, nor such long drying times as in the open air, where wood quality is devaluated and the movement of capital in its commercialization is limited.</p>
					<p>Solar dryers are efficient in drying softwoods and, particularly, hardwoods that are highly prone to develop defects and require slow drying. Hardwoods such as oak are rarely sawn into boards and planks, but pine is available in different commercial sizes in all sawmills in central and northern Mexico (<xref ref-type="bibr" rid="B25">Fuentes <italic>et al.</italic>, 2008</xref>). Therefore, when making the economic assessment of a solar greenhouse dryer using pine wood (<xref ref-type="fig" rid="f6">Figure 3</xref>), <xref ref-type="bibr" rid="B49">Quintanar <italic>et al</italic>. (2011)</xref> and <xref ref-type="bibr" rid="B51">Quintanar (2017)</xref> obtained favorable results with a profitability of 240 % compared to the initial investment, demonstrating that the full investment cost is recovered in the fourth drying load. In order to determine the efficiency and optimal size of the solar dryer, the authors described the design method and calculations, as well as the evaluation per dried volume unit.</p>
					<p>
						<fig id="f6">
							<label>Figure 3</label>
							<caption>
								<title>Solar greenhouse dryer for wood.</title>
							</caption>
							<graphic xlink:href="https://cienciasforestales.inifap.gob.mx/index.php/forestales/es/article/download/1086/version/955/3167/19045/2007-1132-remcf-12-s1-177-gf6.gif"/>
						</fig>
					</p>
					<p>In Mexico, there are different designs of solar dryers, each with its particularities and advantages. The prototype dryer made at INIFAP corresponds to the modified Oxford type, which is promoted as a technology transfer and has been adopted by <italic>ejidos</italic> and cooperating communities in different states of Mexico. The results have been satisfactory for small and medium-sized industries (<xref ref-type="bibr" rid="B46">Quintanar, 2005</xref>; <xref ref-type="bibr" rid="B6">Bárcenas <italic>et al.</italic>, 2010</xref>).</p>
					<p>The success of the dryers in rural communities is attributed to the fact that they are relatively inexpensive to build and simple to operate, and they produce good drying quality. This is explained by the fact that the temperature inside the dryer reaches its maximum value at around 14:00 hours, and the air inside the chamber cools during the night, which increases the relative humidity; drying during the day and increasing in moisture at night allows to release or reduce the drying stresses, which favors the quality of the dried wood (<xref ref-type="bibr" rid="B24">Fuentes <italic>et al.</italic>, 1997</xref>).</p>
				</sec>
				<sec>
					<title>Machining</title>
					<p>Wood machining (machinability) consists in the execution of operations performed in the second transformation industry, where it is made into wood pieces with machines and cutting tools, in order to give the desired dimensions and profiles with the desired aesthetics and quality, for subsequent use in the manufacture of finished products, in addition to preparing the surface for the application of artificial finishes (<xref ref-type="bibr" rid="B58">Tamarit and López, 2007</xref>). In this process, chips, shavings or sawdust are separated by the action of the cutting edge of cutting tools or through friction with sandpaper.</p>
					<p>At the industrial level, machining is essential in the subsequent stages of wood transformation; when it is carried out properly, its quality is increased, and greater added value is given to the final product (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B19">Flores and Fuentes, 2002</xref>).</p>
					<p>In Mexico, the machining quality of wood by taxon is determined based on tests indicated in ASTM D 1666-11 norm (<xref ref-type="bibr" rid="B3">ASTM, 2011</xref>), adapted to the technological characteristics of wood and the machines used in the national forest industry. The tests include planing, turning, molding, drilling and sanding; the quality is evaluated upon the presence and severity of defects on the surface of the machined specimens.</p>
					<p>Hardwoods of tropical and <italic>Quercus</italic> species are more difficult to machine. In order to achieve an acceptable quality, particular working conditions are necessary for the machines and cutting tools, as well as for some wood characteristics.</p>
					<p>The basic density of wood is related to its hardness and, therefore, to its resistance to penetration and cutting. Heavier woods have a smoother and more uniform finish when machined than lighter woods; this phenomenon is explained by the fact that the former have a lower proportion of empty spaces per volume unit and a higher lignin content, which favors a lower collapse of the cell wall at the fiber level due to the action of the cutting element tip (<xref ref-type="bibr" rid="B61">Thibaut <italic>et al</italic>., 2016</xref>); but also require a higher energy consumption. When the wood has a high MC, it has less resistance to cutting, but grain defect is more intense; with a low MC, the grain is chipped, and the resistance to cutting and blunting are higher (<xref ref-type="bibr" rid="B59">Tamarit and Flores, 2012</xref>).</p>
					<p>The presence of silica and crystals makes wood abrasive and blunts the cutting element faster. The main factors inherent in the tools and cutting elements that influence the quality of machining are the type of steel, cutting angles, depth of cut, cutting speed, feed rate and number of knife marks per centimeter (<xref ref-type="bibr" rid="B59">Tamarit and Flores, 2012</xref>). These working conditions can be modified to improve machining quality.</p>
					<p>Planing is the peripheral cut performed with the planing machine blades on the surface of both sides of the boards to obtain the desired, even thickness and a smooth surface. It is the most important machining operation, since any part must be planed before being used in the production of a final product, in order to give it added value. Hardwoods are best planed with the grain and with a blade cutting angle ≤ 20°. In very high-density woods, it is recommended to use tungsten carbide coated blades (<xref ref-type="bibr" rid="B58">Tamarit and López, 2007</xref>; <xref ref-type="bibr" rid="B59">Tamarit and Flores, 2012</xref>).</p>
					<p>Commercial planers have a blade cutting angle of 30°; to reduce it, a bevel must be made on the blades. The action of the knives is distributed over the piece of wood, thus varying the feed speed, or the speed of rotation of the knife-holder head, which results in a certain number of knife marks (NKM) per centimeter on the planed surface (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B58">Tamarit and Flores, 2012</xref>).</p>
					<p>In hardwoods, the planing quality is optimized when using the lowest knife cutting angle and the highest NKM cm<sup>-1</sup> (up to 29); to increase the NKM, the feed speed should be reduced to 7 m min<sup>-1</sup>. Quality is improved when the depth of cut is 1.5 mm for industrial planers and double for smaller capacity planers (<xref ref-type="bibr" rid="B59">Tamarit and Flores, 2012</xref>).</p>
					<p>Turning provides a specific shape or profile to a piece of wood by turning it on a lathe against a blade or gouge, whose edge cuts in different positions. It is made to produce high quality and value-added decorative products. For the best finishing quality, the optimum lathe speed depends on the diameter of the piece of wood to be turned and the feed speed of the blade into the wood; it is recommended to have, at least, four turning speeds (500, 1 000, 1 500, and 3 000 rpm) (<xref ref-type="bibr" rid="B22">Flores <italic>et al</italic>., 2013</xref>). For large diameters, the turning speed should be reduced, and increased when turning small diameter parts (<xref ref-type="bibr" rid="B58">Tamarit and López, 2007</xref>).</p>
					<p>High Bd and fine-textured woods with a MC of 12 to 14 % show the best turning quality; with lower MC, the intensity of defects is higher. Burning of the wood surface is avoided by not using a high rotational speed and by using a slow feed speed (<xref ref-type="bibr" rid="B21">Flores <italic>et al</italic>., 2007b</xref>).</p>
					<p>Molding is used to give a predetermined profile and shape to one or more of the edges of the wood pieces; for this purpose, milling cutters mounted on spinning machines are used; the smoothness of the cut and the detail of the figure are important. For hardwood molding, the peripheral speed should be 40 to 60 m s<sup>-1</sup> with HSS cutters, and 50 to 80 m s<sup>-1</sup> with tungsten carbide cutters; the highest NKM cm<sup>-1</sup> must be applied, with an average feed rate of 3 m min<sup>-1</sup> to produce curved moldings, and 6 m min<sup>-1</sup> for straight moldings. Spindle rotation speed varies from 4 000 to 10 000 rpm (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B19">Flores and Fuentes, 2002</xref>).</p>
					<p>Drilling (boring) consists of drilling one or more holes of specific diameters in pieces of wood, with one or more drills placed vertically or horizontally in a drilling machine, in which the wood moves towards the drill or <italic>vice versa</italic>; it is useful for making joints or assemblies. In order to achieve strong joints, the cut must be clean and smooth, with minimal fiber tearing and of the correct size. Cutting speed has to be low, not exceeding 3 000 rpm; the quality is reduced as larger diameters and lengths of drill bits are used and as the vibration of the bit increases producing larger diameter holes than expected (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B19">Flores and Fuentes, 2002</xref>).</p>
					<p>For high density woods, high speed steel, nickel-chromium steel or tungsten carbide drills are used; the penetration speed should be slow at the moment the drill bit contacts the wood, then increased to 75 cm min<sup>-1</sup>, which will prevent a burned surface from occurring (<xref ref-type="bibr" rid="B58">Tamarit and López, 2007</xref>).</p>
					<p>Sanding is the abrasive action of sandpaper on wood to calibrate its thickness, to obtain flat and smooth surfaces, to remove splinter marks and other defects, and also, to level the pieces that have been joined in order to prepare the surface for the application of an artificial finish. The most common abrasive is sandpaper with quartz grains. Aluminum oxide sandpaper is used in industrial-scale work.</p>
					<p>The sanding speed is proportional to the amount of wood to be removed: a high speed produces a smooth, even surface and requires less energy per volume removed. Sanding is done parallel to the grain of the wood. The boards are first sanded with coarse grit (No. 60 or 80) to remove defects; then, a fine grit (No. 100 or 120) is used to give the final finish (<xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B58">Tamarit and López, 2007</xref>).</p>
					<p>Works by INIFAP researchers have shown the machining quality of 37 hardwood species (Bd ≥ 0.55 g cm<sup>3</sup>) (<xref ref-type="bibr" rid="B16">Flores and Fuentes, 1995</xref>; <xref ref-type="bibr" rid="B64">Zavala and Vázquez, 2001</xref>; <xref ref-type="bibr" rid="B18">Flores <italic>et al</italic>., 2002</xref>; <xref ref-type="bibr" rid="B19">Flores and Fuentes, 2002</xref>; <xref ref-type="bibr" rid="B21">Flores <italic>et al</italic>., 2007b</xref>; <xref ref-type="bibr" rid="B58">Tamarit and López, 2007</xref>; <xref ref-type="bibr" rid="B22">Flores <italic>et al</italic>., 2013</xref>).</p>
					<p>They highlight the need to study the machining of wood from other taxa present in natural forests and commercial plantations, as well as new materials based on natural or chemically or thermomechanically modified wood, and bioengineered products such as boards, laminates and others made from agricultural residues. The performance of new materials (alloys) in the form of inserts or coatings on the cutting elements and their relationship with the quality of the machined surface, the effect on energy consumption, and the level of waste generated should also be assessed. Another area to be explored is the performance of automated machining processes using sensors and computerized numerical control (<xref ref-type="bibr" rid="B61">Thibaut <italic>et al</italic>., 2016</xref>; <xref ref-type="bibr" rid="B40">Nasir and Cool, 2018</xref>).</p>
				</sec>
			</sec>
			<sec>
				<title>Research perspectives</title>
				<p>The studies on wood technology carried out to the present date at INIFAP and other peer institutions include only a fraction of the total of tree species in Mexico. It is important to increase the number of basic studies aimed at technologically characterizing the timber of natural forest and tropical forest species, as well as commercial plantations that, due to their abundance, have the potential for commercial timber harvesting; in addition, their xylotechnological characteristics determine their response and suitability to different transformation processes.</p>
				<p>It is also essential to update the protocols for the best sawmilling, drying and machining practices taking into account the characteristics of the Mexican forest industry, as well as the xylotechnological properties and dimensions of timber species; this will contribute, to some extent, to reduce the obsolescence of the practices of the forest industry. In this work, it is essential to involve forest products companies, as well as raw materials producers in the provision of resources and raw materials for the execution of research.</p>
				<p>Although INIFAP has conducted research on the optimal use of lignocellulosic residues and other biomass sources, the innovative design of new wood-based engineered bioproducts; the analysis of life cycles of bioprocesses and timber products; the optimization of processes for the generation of wood energy from green biomasses; the exploration of thermochemical treatments of wood; the sustainable use of non-timber forest products; as well as the sustainable use of green biomasses; the exploration of thermochemical treatments of wood; and the sustainable use of non-timber forest products; the optimization of processes for the generation of wood energy from green biomass; the exploration of thermochemical treatments for wood; the sustainable use of non-timber forest products, and the generation, adoption and adaptation of new, innovative technologies. These topics are currently incipient in the Institute's lines of research, and therefore represent a wide field of action and a window of opportunity; at the same time, they constitute a challenge for further studies.</p>
				<p>In addition, priority should be given to strategic lines of research that contribute to the innovation, growth, development, competitiveness and sustainability of the forest industry, such as: the modification of wood to make it a more durable, stable and competitive material; recycling of materials that are currently considered waste; quantification of byproducts from lignocellulosic waste. biorefineries and bioenergy; nanotechnology in the forest products industries, and the development of new technologies in the forest industry.</p>
				<p>In an enunciative but not limiting way, all the aforementioned topics and lines of research can integrate an updated research agenda in wood science and technology in agreement with <xref ref-type="bibr" rid="B60">Teischinger (2010)</xref>, involving such concepts as biotechnologies, eco-efficiency, bioeconomy, among others, are oriented to create a balance between technological development, environmental conservation, and socioeconomic development.</p>
				<p>In regard to the Mexican forest industry, it is essential to initiate a gradual transition process to incorporate and profit from the full potential of the Industry 4.0 paradigm (fourth industrial revolution), in which, according to <xref ref-type="bibr" rid="B37">Legg <italic>et al.</italic> (2021)</xref>, both sophisticated emerging technologies and techniques are adopted, incorporated and combined, as well as recent and related industrial applications of diverse nature that enable timber companies to be more efficient and competitive.</p>
			</sec>
		</body>
	</sub-article>
</article>
